Site hosted by Angelfire.com: Build your free website today!
PILE DRIVER
Pile Driver

 

BARGE
BARGE

 


WINCH

 

 


CONTACT US

 

As of November 1, 2014 this site will no longer be updated. Please visit us at www.Piledriver.org. >
You Tube Video

 


 

 

Pile driver for under $6,000!!

Welcome to the GDB West Coast Sales web site. We manufacture high-quality marine pile drivers (drives up to 3,200/4000 pound pilings). We also manufacture power winches and have a partner that manufacture barges.

Information about pile driver:

  • Labor saving.
  • Time Saving.
  • Money Saving.
  • More efficient.
  • Reliable

Put more PROFITS to the bottom line.

If you install piling from a barge you can't afford not to have a Colton 890 or Dual Action Pile Driver. All that you need to do is jet your piling in to stabilize and then place our pile driver on top of the piling, turn on air (100 psi at 24 to 30 cfm), in this range the pile driver operates at 50 to 55 strokes per minute for maximum efficiency and then observe piling be driven to your described depth. No more barge moving or rocking up and down each time you lift your old style pile driver so you can drop on piling to drive in place. Our Colton 890 or Dual Action Pile Driver will pay for its cost in just a few jobs in labor and time savings.

All you need to use our pile driver is to connect it to an air compressor and raise it with your crane or winch atop your piling, then set over piling and then turn on air and watch it drive your piling.

Our standard pile driver weighs approximately 890 pounds( 1000lbs for Dual Action) and sets atop and over the top end of your piling to be driven.

We have manufactured the pile driver for over 10 years and sold them on the East Coast from Maine thru Florida and in the Caribbean Islands and to Alaska and Canada. We will gladly give you addresses and telephone numbers of satisfied customers. We hope we can be of service to you and your company.