Mail Index

• Thread Index

• Re: [PROTEL EDA USERS]: Text in negative space
  • From: Ian Wilson <considered@ozemail.com.au>
• Re: [PROTEL EDA USERS]: Breaking autoroute....
  • From: Brian Guralnick <brian@innerdimension.com>
• Re: [PROTEL EDA USERS]: Copy & paste within PCB P99SE with NETS please.
  • From: Brian Guralnick <brian@innerdimension.com>
• Re: [PROTEL EDA USERS]: Copy & paste within PCB P99SE with NETS please.
  • From: Ian Wilson <considered@ozemail.com.au>
• RE: [PROTEL EDA USERS]: Copy & paste within PCB P99SE with NETS please.
  • From: Heiko Vachek <Vachek@elektronik21.de>
• Re: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: Brian Guralnick <brian@innerdimension.com>
• Re: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: Ian Wilson <considered@ozemail.com.au>
• Re: [PROTEL EDA USERS]: Problem with Power Pins
  • From: Ian Wilson <considered@ozemail.com.au>
• Re: [PROTEL EDA USERS]: Via Funnel hole separation (was Copy & paste within PCB P99SE with NETS please.)
  • From: "David W. Gulley" <dgulley@destinydesigns.com>
• [PROTEL EDA USERS]: company part numbers
  • From: "Pierce, Scott" <SPierce@krautkramer.com>
• Re: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: Brian Guralnick <brian@innerdimension.com>
• Re: [PROTEL EDA USERS]: Little history with an intelligent Autorouter.
  • From: Brian Guralnick <brian@innerdimension.com>
• Re: [PROTEL EDA USERS]: Text in negative space
  • From: Frances Wheeler <wdfran@peganet.com>
• [PROTEL EDA USERS]: Default Title Bar in PCB
  • From: "Thomas Sprunger" <Thomas.Sprunger@rb.ctscorp.com>
• Re: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• [PROTEL EDA USERS]: Protel Database & Part Numbers
  • From: "Jason Van Dellen" <jvd1@home.com>
• RE: [PROTEL EDA USERS]: Copy & paste within PCB P99SE with NETS please.
  • From: Brooks Bill <bbrooks@zoneworx.com>
• Re: [PROTEL EDA USERS]: Text in negative space
  • From: Eric Albach <EricA@airswitch.com>
• Re: [PROTEL EDA USERS]: Storage of distances (ex: Re: parts placed in negative space)
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: Brian Guralnick <brian@innerdimension.com>
• [PROTEL EDA USERS]: New Kid on the Block
  • From: "Micky A. Blain" <mblain@powersmart.com>
• Re: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: What the .png file format is...
  • From: Brian Guralnick <brian@innerdimension.com>
• Re: [PROTEL EDA USERS]: Protel Database & Part Numbers
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: company part numbers
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Protel Database & Part Numbers
  • From: "Jason Van Dellen" <jvd1@home.com>
• [PROTEL EDA USERS]: (off topic) PNG format
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• Re: [PROTEL EDA USERS]: Problem with Power Pins
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Problem with Power Pins
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Copy & paste within PCB P99SE with NETS please.
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• RE: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: "Terri Rothwell" <TerriR@appliedmicro.com>
• Re: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• RE: [PROTEL EDA USERS]: Protel Database & Part Numbers
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: "Micky A. Blain" <mblain@powersmart.com>
• RE: [PROTEL EDA USERS]: Protel Database & Part Numbers
  • From: "Jason Van Dellen" <jvd1@home.com>
• RE: [PROTEL EDA USERS]: No Net assignments on tracks & vias...
  • From: Heiko Vachek <Vachek@elektronik21.de>
• [PROTEL EDA USERS]: Re: file with bad connectivity problem
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• [PROTEL EDA USERS]: Password for the Protel database files....
  • From: "djmoore" <djmoore@tpgi.com.au>
• [PROTEL EDA USERS]: Thruhole footprints
  • From: "Westfeldt, Pat" <pwestfel@ball.com>
• Re: [PROTEL EDA USERS]: Thruhole footprints
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Merging libraries
  • From: Rene Tschaggelar <tschaggelar@dplanet.ch>
• RE: [PROTEL EDA USERS]: Merging libraries
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Merging libraries
  • From: Rene Tschaggelar <tschaggelar@dplanet.ch>
• RE: [PROTEL EDA USERS]: Merging libraries
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Merging libraries
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Print/Preview crash system
  • From: Rudolf Schaffer <info@asgalium.com>
• Re: [PROTEL EDA USERS]: Print/Preview crash system
  • From: HxEngr@aol.com
• Re: [PROTEL EDA USERS]:Interesting fact
  • From: "Dan G." <dan@sgl.com>
• Re: [PROTEL EDA USERS]:Interesting fact*************************
  • From: "Pissavin hubert" <hubert.pissavin@scoresoft.com>
• Re: [PROTEL EDA USERS]:Interesting fact
  • From: Soren Juel Andersen <sja@vitreus.dk>
• Re: [PROTEL EDA USERS]: Print/Preview crash system
  • From: Rudolf Schaffer <info@asgalium.com>
• [PROTEL EDA USERS]: web page maintenance
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• Re: [PROTEL EDA USERS]: Print/Preview crash system
  • From: Hans <hans2@seas.upenn.edu>
• Re: [PROTEL EDA USERS]: Print/Preview crash system
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• Re: [PROTEL EDA USERS]:Interesting fact*************************
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Operating system
  • From: "Brad Marshall" <bmarshal@subsite.com>
• RE: [PROTEL EDA USERS]: Operating system
  • From: "Hood, Jim" <j_hood@drs-sensor.com>
• Re: [PROTEL EDA USERS]: Operating system
  • From: Andrew J Jenkins <andrew.jenkins@grc.nasa.gov>
• Re: [PROTEL EDA USERS]: Password for the Protel database files....
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Password for the Protel database files.. ..
  • From: "Hood, Jim" <j_hood@drs-sensor.com>
• RE: [PROTEL EDA USERS]: Operating system
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Password for the Protel database files....
  • From: Ian Wilson <considered@ozemail.com.au>
• RE: [PROTEL EDA USERS]: Operating system
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Password for the Protel database files....
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]:Interesting fact*************************
  • From: "Pissavin hubert" <hubert.pissavin@scoresoft.com>
• [PROTEL EDA USERS]: Database management for different models of the same board
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: Password for the Protel database files....
  • From: "Jason Van Dellen" <jvd1@home.com>
• RE: [PROTEL EDA USERS]: Database management for different models of the same board
  • From: lloyd.good@ps.ge.com
• RE: [PROTEL EDA USERS]: Password for the Protel database files....
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Database management for different models of the same board
  • From: Mel Burk <burk@pasco.com>
• Re: [PROTEL EDA USERS]: Password for the Protel database files....
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: Password for the Protel database files....
  • From: "Jason Van Dellen" <jvd1@home.com>
• Re: [PROTEL EDA USERS]: Password for the Protel database files....
  • From: Andrew J Jenkins <andrew.jenkins@grc.nasa.gov>
• Re: RE: [PROTEL EDA USERS]: Password for the Protel database files....
  • From: "D. Chris Mackensen" <dcm@mail.ttlc.net>
• [PROTEL EDA USERS]: Design rule vias under smd constraint
  • From: "Nicholas Cobb" <ncobb@vigilantcare.com>
• Re: [PROTEL EDA USERS]: Design rule vias under smd constraint
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Design rule vias under smd constraint
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Database management for different models of the same board
  • From: "Andrew W. Riley III" <drew@taloninst.com>
• [PROTEL EDA USERS]: Email test
  • From: "Bortolo Bolis" <b.bolis@tread.it>
• [PROTEL EDA USERS]: PADS ASCII netlist reference designator bug - is there a workaround?
  • From: "Drew Lundsten" <drew@ccpu.com>
• Re: [PROTEL EDA USERS]: Email test
  • From: Jason Van Dellen <jvd1@home.com>
• RE: [PROTEL EDA USERS]: Is there a consensus on using Access or Windows format .DDBs?
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: ODBC Updated - DDBs now won't open!!!
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: PADS ASCII netlist reference designator bug - is there a workaround?
  • From: lpham@broadcom.com (Linh Pham)
• Re: [PROTEL EDA USERS]: PADS ASCII netlist reference designator bug - is there a workaround?
  • From: "Michael Reagan" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: PADS ASCII netlist reference designator bug - is there a workaround?
  • From: "Drew Lundsten" <drew@ccpu.com>
• [PROTEL EDA USERS]: A pasting array of P99se sp5
  • From: N-Luo/Yu-Ming (C9%I/z INC) <Luo.Yu-Ming@inventec-inc.com>
• [PROTEL EDA USERS]: PADS ASCII netlist reference designator bug - is there a workaround?
  • From: "Michael Reagan" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: ODBC Updated - DDBs now won't open!!!
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: A pasting array of P99se sp5
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• [PROTEL EDA USERS]: help with design rule edit hang
  • From: "Crunch" <cruncher@worldnet.att.net>
• Re: [PROTEL EDA USERS]: help with design rule edit hang
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: help with design rule edit hang
  • From: Terry Harris <terry.harris@iname.com>
• Re: [PROTEL EDA USERS]: help with design rule edit hang
  • From: "Crunch" <cruncher@worldnet.att.net>
• RE: [PROTEL EDA USERS]: PADS ASCII netlist reference designator bug - is there a workaround?
  • From: "Drew Lundsten" <drew@ccpu.com>
• [PROTEL EDA USERS]: Multiple GND nets and I want no plane connection for one of them...
  • From: "D. Chris Mackensen" <dcm@blueskydevice.com>
• Re: [PROTEL EDA USERS]: Multiple GND nets and I want no plane connection for one of them...
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: PADS ASCII netlist reference designator bug - is there a workaround?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: PADS ASCII netlist reference designator bug - is there a workaround?
  • From: Alan Gore <agore@talon.co.nz>
• Re: [PROTEL EDA USERS]: ODBC Updated - DDBs now won't open!!!
  • From: "Linden Doyle" <ldoyle@zener.net>
• RE: [PROTEL EDA USERS]: PADS ASCII netlist reference designator bug - is there a workaround?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Multiple GND nets and I want no plane connection for one of them...
  • From: "D. Chris Mackensen" <dcm@blueskydevice.com>
• Re: [PROTEL EDA USERS]: ODBC Updated - DDBs now won't open!!!
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Multiple GND nets and I want no plane connection for one of them...
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: ODBC Updated - DDBs now won't open!!!
  • From: "Linden Doyle" <ldoyle@zener.net>
• Re: [PROTEL EDA USERS]: Print/Preview crash system
  • From: "Jim Parr" <jim.parr@xtra.co.nz>
• Re: [PROTEL EDA USERS]: Print/Preview crash system
  • From: Rudolf Schaffer <info@asgalium.com>
• Re: [PROTEL EDA USERS]: Email test
  • From: "Dan G." <dan@sgl.com>
• Re: [PROTEL EDA USERS]: PADS ASCII netlist reference designator bug - is there a workaround?
  • From: "Michael Reagan" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: Print/Preview crash system
  • From: Susan Scott <SusanS@Phonon.com>
• Re: [PROTEL EDA USERS]: Print/Preview crash system
  • From: Hans Eberhart <hans2@seas.upenn.edu>
• Re: [PROTEL EDA USERS]: ODBC Updated - DDBs now won't open!!!
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Print/Preview crash system
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Print/Preview crash system
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: Print/Preview crash system
  • From: Susan Scott <SusanS@Phonon.com>
• [PROTEL EDA USERS]: Via size
  • From: Hans <hans2@seas.upenn.edu>
• Re: [PROTEL EDA USERS]: ODBC Updated - DDBs now won't open!!!
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• [PROTEL EDA USERS]: MC13145/6
  • From: "Melvin Stevens" <mstevens@dqbbs.com>
• Re: [PROTEL EDA USERS]: help with design rule edit hang
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Via size
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Via size
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Via size
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: MC13145/6
  • From: "Andrew W. Riley III" <drew@taloninst.com>
• Re: [PROTEL EDA USERS]: Via size
  • From: Hans <hans2@seas.upenn.edu>
• [PROTEL EDA USERS]: SM Device footprints (ex Re: MC13145/6)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: help with design rule edit hang
  • From: Simon Peacock <simon3535@yahoo.com>
• Re: [PROTEL EDA USERS]: Via size
  • From: Clive.Broome@qsa.idt.com
• RE: [PROTEL EDA USERS]: Via size
  • From: Heiko Vachek <Vachek@elektronik21.de>
• RE: [PROTEL EDA USERS]: Via size
  • From: Heiko Vachek <Vachek@elektronik21.de>
• Re: [PROTEL EDA USERS]: Via size
  • From: HxEngr@aol.com
• Re: [PROTEL EDA USERS]: help with design rule edit hang
  • From: Roger <roger@empire.net>
• Re: [PROTEL EDA USERS]: help with design rule edit hang
  • From: "Michael Reagan" <edsi@netstorm.net>
• [PROTEL EDA USERS]: Problem with PDF
  • From: "Eric Bobillier" <bobiller@st-gilles.rennes.inra.fr>
• [PROTEL EDA USERS]: Protel / Specctra problems
  • From: Todd Conard <tec@tec-tronics.com>
• Re: [PROTEL EDA USERS]: help with design rule edit hang
  • From: John Williams <john.williams@alumni.stanford.org>
• Re: [PROTEL EDA USERS]: help with design rule edit hang
  • From: Terry Harris <terry.harris@iname.com>
• [PROTEL EDA USERS]: Rebuild polygons
  • From: Wolfgang <Wolfgang@rsi-inc.com>
• Re: [PROTEL EDA USERS]: Rebuild polygons
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: SVGA drivers for Autotrax
  • From: "Steven Murray" <steve@airborn.com.au>
• [PROTEL EDA USERS]: SVGA drivers for Autotrax
  • From: "Steven Murray" <steve@airborn.com.au>
• Re: [PROTEL EDA USERS]: Protel / Specctra problems
  • From: "Michael Reagan" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: Print/Preview crash system
  • From: "Jenkins, Charlie" <JENKINSC@PIOS.COM>
• [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  • From: "D. Chris Mackensen" <dcm@blueskydevice.com>
• RE: [PROTEL EDA USERS] Can't re-install???
  • From: "Jenkins, Charlie" <JENKINSC@PIOS.COM>
• [PROTEL EDA USERS]: Dialog box design (ex Re: help with design rule edit hang)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: ?? Tools/Preferences/Colors/Connections
  • From: "Pyle, John" <JPyle@krautkramer.com>
• Re: [PROTEL EDA USERS]: ODBC Updated - DDBs now won't open!!!
  • From: "Linden Doyle" <ldoyle@zener.net>
• RE: [PROTEL EDA USERS]: Advice on Learning PCB Design
  • From: "Jenkins, Charlie" <JENKINSC@PIOS.COM>
• Re: [PROTEL EDA USERS]: Protel / Specctra problems
  • From: Todd Conard <tec@tec-tronics.com>
• [PROTEL EDA USERS]: Re: What does RSRCMTR.EXE do?
  • From: HxEngr@aol.com
• Re: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  • From: "Mike Fessler" <mfessler@kcp.com>
• RE: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  • From: Steve Smith <smiths@stacoenergy.com>
• RE: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  • From: Steve Smith <smiths@stacoenergy.com>
• Re: [PROTEL EDA USERS]: Print/Preview crash system
  • From: "Linden Doyle" <ldoyle@zener.net>
• [PROTEL EDA USERS]: Sch3 Library Editor Defaults.
  • From: "Ian" <ian@ianphillips.demon.co.uk>
• Re: [PROTEL EDA USERS]: ?? Tools/Preferences/Colors/Connections
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: New Tutorial Available
  • From: "Protelcsc" <protelcsc@protel.com.au>
• Re: [PROTEL EDA USERS]: ?? Tools/Preferences/Colors/Connections
  • From: Mel Burk <burk@pasco.com>
• Re: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: Centering Gerber files (ex Re: ODBC Updated - DDBs now won't open!!!)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Advice on Learning PCB Design
  • From: "Hood, Jim" <j_hood@drs-sensor.com>
• RE: [PROTEL EDA USERS]: Drill Drawing symbol reference chart
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: Drill Drawing symbol reference chart - test
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: ODBC Updated - DDBs now won't open!!!
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Re: Password for the Protel Database file
  • From: "Protelcsc" <protelcsc@protel.com.au>
• Re: [PROTEL EDA USERS]: ?? Tools/Preferences/Colors/Connections
  • From: Michael Schmitt <mschmitt@baumerident.com>
• RE: [PROTEL EDA USERS]: ?? Tools/Preferences/Colors/Connections
  • From: Yu-Ming Luo <Luo.Yu-Ming@inventec-inc.com>
• RE: [PROTEL EDA USERS]: Sch3 Library Editor Defaults.
  • From: "Eric Bobillier" <bobiller@st-gilles.rennes.inra.fr>
• [PROTEL EDA USERS]: Finding a part in the libraries
  • From: Jeff Nelson <rjnelson@voicenet.com>
• [PROTEL EDA USERS]: Mr Karavidas' mail bounceback.
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Protel / Specctra problems
  • From: Peter Bennett <bennett@triumf.ca>
• Re: [PROTEL EDA USERS]: Protel / Specctra problems
  • From: "Michael Reagan" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: Re: What does RSRCMTR.EXE do?
  • From: Susan Scott <SusanS@Phonon.com>
• RE: [PROTEL EDA USERS]: Finding a part in the libraries
  • From: "Micky A. Blain" <mblain@powersmart.com>
• Re: [PROTEL EDA USERS]: Finding a part in the libraries
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• SV: [PROTEL EDA USERS]: Re: Password for the Protel Database file
  • From: "Peder K. Hellegaard" <pkh@mediatronic.dk>
• RE: [PROTEL EDA USERS]: Re: What does RSRCMTR.EXE do?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Questions
  • From: Amy Nolen <ANolen@RFMD.com>
• Re: [PROTEL EDA USERS]: Re: What does RSRCMTR.EXE do?
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: Questions
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Questions
  • From: "Brian Guralnick" <brian@innerdimension.com>
• Re: [PROTEL EDA USERS]: Questions
  • From: "Mark Koitmaa" <Mark@techservinc.com>
• Re: [PROTEL EDA USERS]: Questions
  • From: Mel Burk <burk@pasco.com>
• [PROTEL EDA USERS]: Print Priview disappears
  • From: "Ron Tupa" <RTupa@adtron.com>
• RE: [PROTEL EDA USERS]: Re: What does RSRCMTR.EXE do?
  • From: Bruce Walter <BWalter@davisnet.com>
• RE: [PROTEL EDA USERS]: Print Priview disappears
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Questions
  • From: "Jeff Stout" <jstout@ncon.com>
• [PROTEL EDA USERS]: Re: What does RSRCMTR.EXE do?
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Re: What does RSRCMTR.EXE do?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Finding a part in the libraries
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Print Priview disappears
  • From: "Chris Mogford" <chris.mogford@varianinc.com>
• RE: [PROTEL EDA USERS]: Re: What does RSRCMTR.EXE do?
  • From: Susan Scott <SusanS@Phonon.com>
• RE: [PROTEL EDA USERS]: Questions
  • From: Amy Nolen <ANolen@RFMD.com>
• RE: [PROTEL EDA USERS] Access Violation after Autoplacment
  • From: Heiko Vachek <Vachek@elektronik21.de>
• Re: [PROTEL EDA USERS]: Print Priview disappears
  • From: "Ron Tupa" <RTupa@adtron.com>
• RE: [PROTEL EDA USERS] Access Violation after Autoplacment
  • From: "Pierce, Scott" <SPierce@krautkramer.com>
• RE: [PROTEL EDA USERS] Access Violation after Autoplacment
  • From: Heiko Vachek <Vachek@elektronik21.de>
• [PROTEL EDA USERS]: Moving problems
  • From: "Phan Le" <ple@alpha.ca>
• [PROTEL EDA USERS]: blind vias w/ Protel / Specctra
  • From: Todd Conard <tec@tec-tronics.com>
• [PROTEL EDA USERS]: Disappearing print
  • From: "Ron Tupa" <RTupa@adtron.com>
• Re: [PROTEL EDA USERS]: Disappearing print
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• [PROTEL EDA USERS]: Default Designators
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: Default Designators
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: help with design rule edit hang
  • From: Ian Wilson <considered@ozemail.com.au>
• RE: [PROTEL EDA USERS]: Moving problems
  • From: Heiko Vachek <Vachek@elektronik21.de>
• Re: [PROTEL EDA USERS]: Moving problems
  • From: "Les Grant" <lesgrant@grantronics.com.au>
• Re: [PROTEL EDA USERS]: blind vias w/ Protel / Specctra
  • From: "Michael Reagan" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: Finding a part in the libraries
  • From: Frances Wheeler <wdfran@peganet.com>
• RE: [PROTEL EDA USERS]: Moving problems
  • From: Heiko Vachek <Vachek@elektronik21.de>
• RE: [PROTEL EDA USERS]: Moving problems
  • From: "Les Grant" <lesgrant@grantronics.com.au>
• RE: [PROTEL EDA USERS]: Default Designators
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: Default Designators
  • From: HxEngr@aol.com
• Re: [PROTEL EDA USERS]: Pbs with the field
  • From: "Pissavin hubert" <hubert.pissavin@scoresoft.com>
• RE: [PROTEL EDA USERS]: Default Designators
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Moving problems
  • From: Heiko Vachek <Vachek@elektronik21.de>
• RE: [PROTEL EDA USERS]: Moving problems
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Special Event - Specctra Training - San Diego @ Cadence
  • From: Brooks Bill <bbrooks@zoneworx.com>
• Re: [PROTEL EDA USERS]: Finding a part in the libraries
  • From: Dave.E.Lewis@HughesED.com
• RE: [PROTEL EDA USERS]: Moving problems
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Special Event - Specctra Training - San Diego @ Cadence
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• RE: [PROTEL EDA USERS]: Pbs with the field
  • From: "Nicholas Piccinich" <piccinichn@blackhawkmgmt.com>
• RE: [PROTEL EDA USERS]: Moving problems
  • From: "Phan Le" <ple@alpha.ca>
• RE: [PROTEL EDA USERS]: Special Event - Specctra Training - San Diego @ Cadence
  • From: Brooks Bill <bbrooks@zoneworx.com>
• [PROTEL EDA USERS]: Top Paste in single-layer display shows tracks
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• Re: [PROTEL EDA USERS]: Top Paste in single-layer display shows tracks
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: Top Paste in single-layer display shows tracks
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: Merging libraries
  • From: "Chris Mogford" <chris.mogford@varianinc.com>
• Re: [PROTEL EDA USERS]: Finding a part in the libraries
  • From: Craig Rose <craig@aspiring-technology.com>
• RE: [PROTEL EDA USERS]: Moving problems
  • From: Heiko Vachek <Vachek@elektronik21.de>
• [PROTEL EDA USERS]: Simulation voltmeter ***********************
  • From: "Pissavin hubert" <hubert.pissavin@scoresoft.com>
• [PROTEL EDA USERS]: PCB Fab House Capacity
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: PCB Fab House Capacity
  • From: Steve Smith <smiths@stacoenergy.com>
• RE: [PROTEL EDA USERS]: PCB Fab House Capacity
  • From: "Terri Rothwell" <TerriR@appliedmicro.com>
• [PROTEL EDA USERS]: Importing Bitmap To Protel98 or Protel99SE PCB
  • From: "Vinh Ho" <vinh_ho@hotmail.com>
• RE: [PROTEL EDA USERS]: Importing Bitmap To Protel98 or Protel99 SE PCB
  • From: N-Luo/Yu-Ming (C9%I/z INC) <Luo.Yu-Ming@inventec-inc.com>
• Re: [PROTEL EDA USERS]: Importing Bitmap To Protel98 or Protel99SE PCB
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: PCB Power Print Server quirks
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Importing Bitmap To Protel98 or Protel99SE PCB
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Advice on Learning PCB Design
  • From: Bob Fearon <bfearon@crosslinkinc.com>
• [PROTEL EDA USERS]: DXF out
  • From: "Rich Thomas" <rthomas@sunriselabs.com>
• RE: [PROTEL EDA USERS]: Importing Bitmap To Protel98 or Protel99 SE PCB
  • From: "Vinh Ho" <vinh_ho@hotmail.com>
• RE: [PROTEL EDA USERS]: Importing Bitmap To Protel98 or Protel99 SE PCB
  • From: "Phan Le" <ple@alpha.ca>
• [PROTEL EDA USERS]: Displaced Schematic Symbols
  • From: Mel Burk <burk@pasco.com>
• [PROTEL EDA USERS]: Orcad and PADs file conversions
  • From: NCE <patnystrom@yahoo.com>
• Re: [PROTEL EDA USERS]: Orcad and PADs file conversions
  • From: "Vinh Ho" <vinh_ho@hotmail.com>
• RE: [PROTEL EDA USERS]: Displaced Schematic Symbols
  • From: "Phan Le" <ple@alpha.ca>
• Re: [PROTEL EDA USERS]: Displaced Schematic Symbols
  • From: Mel Burk <burk@pasco.com>
• RE: [PROTEL EDA USERS]: Orcad and PADs file conversions
  • From: Wolfgang <Wolfgang@rsi-inc.com>
• Re: [PROTEL EDA USERS]: Displaced Schematic Symbols
  • From: "Brian Guralnick" <brian@innerdimension.com>
• [PROTEL EDA USERS]: Update of Klipper Available - Improvements to Bitmap Importing
  • From: Brian Watson <brian@desktop-eda.com.au>
• [PROTEL EDA USERS]: PCB3 Clicking on component, makes cursor jump off screen
  • From: "Ian" <ian@ianphillips.demon.co.uk>
• Re: [PROTEL EDA USERS]: Message status from e-mail system
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Aperture definitions for (regular) octagonal pads
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Spectra Translation
  • From: "Michael Reagan" <edsi@netstorm.net>
• [PROTEL EDA USERS]: Autorouting questions
  • From: Tom Reineking <reineking@pasco.com>
• [PROTEL EDA USERS]: Autorouting questions
  • From: Tom Reineking <reineking@pasco.com>
• [PROTEL EDA USERS]: Job Hunting
  • From: "Hood, Jim" <j_hood@drs-sensor.com>
• RE: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: lloyd.good@ps.ge.com
• [PROTEL EDA USERS]: Disappearing PCBV Components
  • From: "Ian Phillips" <ian@ianphillips.demon.co.uk>
• RE: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: "Hood, Jim" <j_hood@drs-sensor.com>
• RE: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: "Micky A. Blain" <mblain@powersmart.com>
• [PROTEL EDA USERS]: Drill Drawing
  • From: Hans <hans2@seas.upenn.edu>
• Re: [PROTEL EDA USERS]: Disappearing PCBV Components
  • From: Ian Wilson <considered@ozemail.com.au>
• RE: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: Drill Drawing
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Disappearing PCBV Components
  • From: Clive.Broome@qsa.idt.com
• Re: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: "Michael Reagan" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Hans <hans2@seas.upenn.edu>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: Jump to a new location
  • From: Yu-Ming Luo <Luo.Yu-Ming@inventec-inc.com>
• RE: [PROTEL EDA USERS]: Jump to a new location
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• [PROTEL EDA USERS]: Layers visibility (ex Re: Jump to a new location)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Layers visibility (ex Re: Jump to a new location)
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Disappearing PCBV Components
  • From: "Linden Doyle" <ldoyle@zener.net>
• Re: [PROTEL EDA USERS]: Disappearing PCB Components
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Aperture definitions for (regular) octagonal pads
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Autorouting questions
  • From: "Pat Rundle" <pat@opsys.co.uk>
• Re: [PROTEL EDA USERS]: Controlled Impedance Design
  • From: "Michael Reagan" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: Autorouting questions
  • From: "Michael Reagan" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: Autorouting questions
  • From: "Pat Rundle" <pat@opsys.co.uk>
• [PROTEL EDA USERS]: routing to vias
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• Re: [PROTEL EDA USERS]: Autorouting questions
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: "Evan Scarborough" <evans_cad@hotmail.com>
• Re: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: "Bagotronix Tech Support" <techsupport@bagotronix.com>
• Re: [PROTEL EDA USERS]: Disappearing PCBV Components
  • From: "Ian Phillips" <ian@ianphillips.demon.co.uk>
• [PROTEL EDA USERS]: TEST Only!
  • From: Brad Velander <BVelander@norsat.com>
• [PROTEL EDA USERS]: Database linking to an external database.
  • From: Brad Velander <BVelander@norsat.com>
• [PROTEL EDA USERS]: Gerber file arc commands (ex Re: Drill Drawing)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Database linking to an external database.
  • From: "Brad Shea" <brad.shea@aesltd.com.au>
• Re: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Edi Im Hof <edi.imhof@ihe.ch>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Hans <hans2@seas.upenn.edu>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: HxEngr@aol.com
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Hans <hans2@seas.upenn.edu>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Drill Drawing
  • From: "Michael Biggs" <mbiggs@activepower.com>
• RE: [PROTEL EDA USERS]: Drill Drawing
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: Drill Drawing
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: HxEngr@aol.com
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Hans <hans2@seas.upenn.edu>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: "edsi" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: Drill Drawing
  • From: Brad Velander <BVelander@norsat.com>
• [PROTEL EDA USERS]: footprint PDF
  • From: "Melvin Stevens" <mstevens@dqbbs.com>
• [PROTEL EDA USERS]: font color for pin#'s
  • From: "Brad Marshall" <bmarshal@subsite.com>
• Re: [PROTEL EDA USERS]: Database linking to an external database.
  • From: "Linden Doyle" <ldoyle@zener.net>
• RE: [PROTEL EDA USERS]: Database linking to an external database .
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: Mouse and screen behavior
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Mouse and screen behavior
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Mouse and screen behavior
  • From: Mel Burk <burk@pasco.com>
• Re: [PROTEL EDA USERS]: font color for pin#'s
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Mouse and screen behavior
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: Mouse and screen behavior
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: "edsi" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: Drill Drawing
  • From: "Le, Phan" <PLe@ALPHA.CA>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Hans <hans2@seas.upenn.edu>
• RE: [PROTEL EDA USERS]: Mouse and screen behavior
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Mouse and screen behavior
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: "edsi" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: Drill Drawing
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: Drill Drawing
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: "Linden Doyle" <ldoyle@zener.net>
• [PROTEL EDA USERS]: Gerber file settings (ex Re: Drill Drawing)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Mouse and screen behavior
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Shortcut keys (ex Re: Mouse and screen behavior)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: font color for pin#'s
  • From: HxEngr@aol.com
• [PROTEL EDA USERS]: Gerbers?
  • From: lloyd.good@ps.ge.com
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: "edsi" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: Shortcut keys (ex Re: Mouse and screen behavior)
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• [PROTEL EDA USERS]: Quick Explanation?
  • From: "Michael Biggs" <mbiggs@activepower.com>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re:[PROTEL EDA USERS]: font color for pin#'s
  • From: nick_hoskings@devlin.co.uk
• Re: [PROTEL EDA USERS]: Operating system
  • From: Rene Tschaggelar <tschaggelar@dplanet.ch>
• [PROTEL EDA USERS]: Shortcut keys (was: Mouse and screen behavior)
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: Mouse and screen behavior
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Gerber file settings (ex Re: Drill Drawing)
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: "edsi" <edsi@netstorm.net>
• [PROTEL EDA USERS]: multiselect and change
  • From: Rene Tschaggelar <tschaggelar@dplanet.ch>
• Re: [PROTEL EDA USERS]: Quick Explanation?
  • From: "Mark Koitmaa" <Mark@techservinc.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Peter Bennett <bennett@triumf.ca>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: "Mark Koitmaa" <Mark@techservinc.com>
• RE: [PROTEL EDA USERS]: Quick Explanation?
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: Gerbers?
  • From: Steve Smith <smiths@stacoenergy.com>
• RE: [PROTEL EDA USERS]: Gerbers?
  • From: Brooks Bill <bbrooks@zoneworx.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Bob Fearon <bfearon@crosslinkinc.com>
• RE: [PROTEL EDA USERS]: Gerbers?
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: CC loyd <cloyd@sugar-land.spc.slb.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• RE: [PROTEL EDA USERS]: Gerbers?
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Drill Drawing
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: Quick Explanation?
  • From: Edi Im Hof <edi.imhof@ihe.ch>
• Re: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: "Vinh Ho" <vinh_ho@hotmail.com>
• RE: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: "Hood, Jim" <j_hood@drs-sensor.com>
• RE: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: Brooks Bill <bbrooks@zoneworx.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: Camtastic 2000 Designer's Edition (ex Re: Gerbers?)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Shortcut keys (was: Mouse and screen behavior)
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: font color for pin#'s
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: "edsi" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: Quick Explanation?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Gerbers?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Using Protel's autorouter
  • From: "Noah Aklilu" <naklilu@ualberta.ca>
• Re: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: "edsi" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: Sorry everyone
  • From: "edsi" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: Bob Fearon <bfearon@crosslinkinc.com>
• RE: [PROTEL EDA USERS]: Protel vs Pads ?
  • From: Brooks Bill <bbrooks@zoneworx.com>
• RE: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: "Terri Rothwell" <TerriR@appliedmicro.com>
• RE: [PROTEL EDA USERS]: Gerbers?
  • From: lloyd.good@ps.ge.com
• RE: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: Brooks Bill <bbrooks@zoneworx.com>
• RE: [PROTEL EDA USERS]: multiselect and change
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: Protel vs Pads vs router
  • From: "edsi" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: lloyd.good@ps.ge.com
• RE: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: Duane Foster <DFoster@alpha.com>
• Re: [PROTEL EDA USERS]: Drill Drawing
  • From: Hans Eberhart <hans2@seas.upenn.edu>
• Re: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• RE: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: "Terri Rothwell" <TerriR@appliedmicro.com>
• RE: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: "Bagotronix Tech Support" <techsupport@bagotronix.com>
• Re: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• RE: [PROTEL EDA USERS]: open source
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Using Protel's autorouter
  • From: Roger <roger@empire.net>
• Re: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: Roger <roger@empire.net>
• FW: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: Daniel Webster <danielw@natech.com>
• RE: [PROTEL EDA USERS]: Protel vs Pads vs router
  • From: Yu-Ming Luo <Luo.Yu-Ming@inventec-inc.com>
• RE: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: "edsi" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: "edsi" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: Simon Peacock <simon3535@yahoo.com>
• [PROTEL EDA USERS]: DC Connector (Was: CATCHING HOLE ERROR)
  • From: Ian Wilson <considered@ozemail.com.au>
• RE: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: Gaetan Fournier <FournierG@kantech.com>
• [PROTEL EDA USERS]: Copy part of schematic in P99
  • From: henric.andersson@mecel.se
• RE: [PROTEL EDA USERS]: Copy part of schematic in P99
  • From: "Micky A. Blain" <mblain@powersmart.com>
• RE: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: Daniel Webster <danielw@natech.com>
• Re: [PROTEL EDA USERS]: Copy part of schematic in P99
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• Re: [PROTEL EDA USERS]: Copy part of schematic in P99
  • From: David Want <davew@vvlp.co.uk>
• RE: [PROTEL EDA USERS]: Copy part of schematic in P99
  • From: "Micky A. Blain" <mblain@powersmart.com>
• RE: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Copy part of schematic in P99
  • From: "Pat Rundle" <pat@opsys.co.uk>
• RE: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: Daniel Webster <danielw@natech.com>
• [PROTEL EDA USERS]: Faraday shield vs. Gnd thermal
  • From: "Velez, Ovidio" <OVelez@pelco.com>
• [PROTEL EDA USERS]: placing a trace ???
  • From: Robison Michael R CNIN <Robison_M@crane.navy.mil>
• Re: [PROTEL EDA USERS]: placing a trace ???
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: placing a trace ???
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: placing a trace ???
  • From: Hans <hans2@seas.upenn.edu>
• Re: [PROTEL EDA USERS]: placing a trace ???
  • From: Mel Burk <burk@pasco.com>
• Re: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: Protel closes its doors
  • From: "Chris Morris" <cmorris2@xmission.com>
• RE: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• [PROTEL EDA USERS]: Customised Servers (ex Re: CATCHING HOLE ERROR !)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Customised Servers (ex Re: CATCHING HOLE ERROR !)
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• [PROTEL EDA USERS]: Re: Protel closes its doors
  • From: "Protelcsc" <protelcsc@protel.com.au>
• RE: [PROTEL EDA USERS]: Re: Protel closes its doors
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Protel vs Accel EDA ?
  • From: "Noah Aklilu" <naklilu@ualberta.ca>
• RE: [PROTEL EDA USERS]: Re: Protel closes its doors
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Re: Protel closes its doors
  • From: "Hamid A. Wasti" <hamid@regandesigns.com>
• RE: [PROTEL EDA USERS]: Re: Protel closes its doors
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• [PROTEL EDA USERS]: Protel relocates
  • From: "edsi" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: Protel relocates
  • From: Roger <roger@empire.net>
• Re: [PROTEL EDA USERS]: DOS C compilers (was Protel vs Accel EDA ?)
  • From: "Bagotronix Tech Support" <techsupport@bagotronix.com>
• Re: [PROTEL EDA USERS]: Protel relocates
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: CATCHING HOLE ERROR !
  • From: Daniel Webster <danielw@natech.com>
• Re: [PROTEL EDA USERS]: Protel closes its doors
  • From: "Mark W. Lund" <mlund@powerstream.com>
• Re: [PROTEL EDA USERS]: Protel closes its doors
  • From: "PowerSmart" <mblain@powersmart.com>
• RE: [PROTEL EDA USERS]: Protel relocates
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: DOS C compilers
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• [PROTEL EDA USERS]: EDIF out??
  • From: "Hood, Jim" <j_hood@drs-sensor.com>
• RE: [PROTEL EDA USERS]: Re: Protel closes its doors
  • From: "Vinh Ho" <vinh_ho@hotmail.com>
• Re: [PROTEL EDA USERS]: DOS C compilers
  • From: "Bagotronix Tech Support" <techsupport@bagotronix.com>
• Re: [PROTEL EDA USERS]: EDIF out??
  • From: "Brad Marshall" <bmarshal@subsite.com>
• Re: [PROTEL EDA USERS]: The invisible bits trick!
  • From: Garry Foster <garry@kestrel-tech.demon.co.uk>
• Re: [PROTEL EDA USERS]: DOS C compilers
  • From: Andrew J Jenkins <andrew.jenkins@grc.nasa.gov>
• Re: [PROTEL EDA USERS]: DOS C compilers
  • From: "Bagotronix Tech Support" <techsupport@bagotronix.com>
• RE: [PROTEL EDA USERS]: DOS C compilers
  • From: davidk@smcky.com
• Re: [PROTEL EDA USERS]: DOS C compilers
  • From: "Bagotronix Tech Support" <techsupport@bagotronix.com>
• Re: [PROTEL EDA USERS]: DOS C compilers
  • From: John Williams <john.williams@alumni.stanford.org>
• Re: [PROTEL EDA USERS]: Re: Protel closes its doors
  • From: "Chris Morris" <cmorris2@xmission.com>
• RE: [PROTEL EDA USERS]: Re: Protel closes its doors
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Protel closes its doors
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Protel relocates
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Twisted Synchroniser
  • From: "Linden Doyle" <ldoyle@zener.net>
• Re: [PROTEL EDA USERS]: The invisible bits trick!
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: The invisible bits trick!
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Re: Protel closes its doors
  • From: "edsi" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: Twisted Synchroniser
  • From: "Les Grant" <lesgrant@grantronics.com.au>
• Re: [PROTEL EDA USERS]: The invisible bits trick!
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Twisted Synchroniser
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Twisted Synchroniser
  • From: "Linden Doyle" <ldoyle@zener.net>
• Re: [PROTEL EDA USERS]: Twisted Synchroniser
  • From: "Linden Doyle" <ldoyle@zener.net>
• Re: [PROTEL EDA USERS]: The invisible bits trick!
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Twisted Synchroniser
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Twisted Synchroniser
  • From: Ian Wilson <considered@ozemail.com.au>
• Re: [PROTEL EDA USERS]: Twisted Synchroniser
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: "Michael Biggs" <mbiggs@activepower.com>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: Brad Velander <BVelander@norsat.com>
• [PROTEL EDA USERS]: Printing w/W2K
  • From: "Brad Marshall" <bmarshal@subsite.com>
• [PROTEL EDA USERS]: Used license
  • From: Bruce Walter <BWalter@davisnet.com>
• Re: [PROTEL EDA USERS]: Re:fiducials
  • From: "Casey Vanderweide" <pcbguy@haidagwaii.net>
• RE: [PROTEL EDA USERS]: Printing w/W2K
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Printing w/W2K
  • From: "Mark Koitmaa" <Mark@techservinc.com>
• Re: [PROTEL EDA USERS]: Twisted Synchroniser
  • From: "Linden Doyle" <ldoyle@zener.net>
• Re: [PROTEL EDA USERS]: Re:fiducials
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Used license
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Keyboard Shortcuts
  • From: "Linden Doyle" <ldoyle@zener.net>
• Re: [PROTEL EDA USERS]: Keyboard Shortcuts
  • From: Simon Peacock <simon3535@yahoo.com>
• Re: [PROTEL EDA USERS]: Keyboard Shortcuts
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: Library Update
  • From: "Protelcsc" <protelcsc@protel.com.au>
• RE: [PROTEL EDA USERS]: Printing w/W2K
  • From: Christoff van Zyl <ChristoffV@marinedata.co.za>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: "Michael Biggs" <mbiggs@activepower.com>
• RE: [PROTEL EDA USERS]: Printing w/W2K
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: "Mark Koitmaa" <Mark@techservinc.com>
• SV: [PROTEL EDA USERS]: Printing w/W2K
  • From: "Peder K. Hellegaard" <pkh@mediatronic.dk>
• [PROTEL EDA USERS]: Problems with NC/DRILL generation for lpkf
  • From: "Fabio Rizental Coutinho" <fabio@lactec.org.br>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: Printing w/W2K
  • From: "Mark Koitmaa" <Mark@techservinc.com>
• Re: [PROTEL EDA USERS]: Problems with NC/DRILL generation for lpkf
  • From: "Nicholas Cobb" <ncobb@vigilantcare.com>
• RE: [PROTEL EDA USERS]: Problems with NC/DRILL generation for lp kf
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: Problems with NC/DRILL generation for lpkf
  • From: Andrew J Jenkins <andrew.jenkins@grc.nasa.gov>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: "Mark Koitmaa" <Mark@techservinc.com>
• Re: [PROTEL EDA USERS]: Problems with NC/DRILL generation for lpkf
  • From: HxEngr@aol.com
• Re: [PROTEL EDA USERS]: Problems with NC/DRILL generation for lpkf
  • From: "Fabio Rizental Coutinho" <fabio@lactec.org.br>
• Re: [PROTEL EDA USERS]: Re:fiducials
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• [PROTEL EDA USERS]: questions about component placement when loading a netlist
  • From: rimas <rimas@cnmat.berkeley.edu>
• Re: [PROTEL EDA USERS]: questions about component placement when loading a netlist
  • From: "Mark Koitmaa" <Mark@techservinc.com>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: Simon Peacock <simon3535@yahoo.com>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: Re:fiducials
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Design Rules
  • From: "Michael Beavis" <Michael.Beavis@advminingtech.com.au>
• RE: [PROTEL EDA USERS]: questions about component placement when loading a netlist
  • From: Duane Foster <DFoster@alpha.com>
• Re: [PROTEL EDA USERS]: Design Rules
  • From: Simon Peacock <simon3535@yahoo.com>
• RE: [PROTEL EDA USERS]: Design Rules
  • From: "Hood, Jim" <j_hood@drs-sensor.com>
• RE: [PROTEL EDA USERS]: Design Rules
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: Design Rules
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Design Rules
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: fiducials
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: fiducials
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• RE: [PROTEL EDA USERS]: Printing w/W2K
  • From: Christoff van Zyl <ChristoffV@marinedata.co.za>
• Re: [PROTEL EDA USERS]: Re:fiducials (IPC-SM-782)
  • From: "Andrew W. Riley III" <drewmeister3@earthlink.net>
• [PROTEL EDA USERS]: Controlled Impedance Nets
  • From: HxEngr@aol.com
• [PROTEL EDA USERS]: Employment Opportunity - San Diego
  • From: "Allen,Mark" <MAllen@dtwc.com>
• RE: [PROTEL EDA USERS]: Controlled Impedance Nets
  • From: "Le, Phan" <PLe@ALPHA.CA>
• Re: [PROTEL EDA USERS]: Controlled Impedance Nets
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• Re: [PROTEL EDA USERS]: Problems with NC/DRILL generation for lpkf
  • From: Dave Adams <dma@safco1.com>
• [PROTEL EDA USERS]: Embedded Microstrips
  • From: Carlos Claveria <Carlos.claveria@sparteksystems.com>
• RE: [PROTEL EDA USERS]: Embedded Microstrips
  • From: Brooks Bill <bbrooks@zoneworx.com>
• Re: [PROTEL EDA USERS]: Embedded Microstrips
  • From: "Jeff Lewis" <jeff@idea-logic.com>
• Re: [PROTEL EDA USERS]: Embedded Microstrips
  • From: HxEngr@aol.com
• Re: [PROTEL EDA USERS]: Embedded Microstrips
  • From: "Gene Silvernail" <genes@belhaven.com>
• Re: [PROTEL EDA USERS]: Embedded Microstrips
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• [PROTEL EDA USERS]: Orcad Listserver
  • From: N-Luo/Yu-Ming (C9%I/z INC) <Luo.Yu-Ming@inventec-inc.com>
• Re: [PROTEL EDA USERS]: Embedded Microstrips
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Embedded Microstrips
  • From: "edsi" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: Orcad Listserver
  • From: "Andrew W. Riley III" <drewmeister3@earthlink.net>
• [PROTEL EDA USERS]: PADS Importer and P-CAD Translation Pack Update
  • From: "Protelcsc" <protelcsc@protel.com.au>
• RE: [PROTEL EDA USERS]: Translating P-CAD schematics to Protel 99SE
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Translating P-CAD schematics to Protel 99SE
  • From: "Mark Koitmaa" <Mark@techservinc.com>
• [PROTEL EDA USERS]: creating a pdf file from a .sch file
  • From: "Susan Yoder" <syoder@socal.rr.com>
• RE: [PROTEL EDA USERS]: creating a pdf file from a .sch file
  • From: "Buckley.Dave" <BuckleD@intgame.com>
• Re: [PROTEL EDA USERS]: creating a pdf file from a .sch file
  • From: "Cliff Lawrence" <cliffl@arcam.co.uk>
• RE: [PROTEL EDA USERS]: creating a pdf file from a .sch file
  • From: "D. Chris Mackensen" <dcm@blueskydevice.com>
• Re: [PROTEL EDA USERS]: creating a pdf file from a .sch file
  • From: Terry Harris <terry.harris@iname.com>
• Re: [PROTEL EDA USERS]: creating a pdf file from a .sch file
  • From: "Susan Yoder" <syoder@socal.rr.com>
• Re: [PROTEL EDA USERS]: creating a pdf file from a .sch file
  • From: "Susan Yoder" <syoder@socal.rr.com>
• Re: [PROTEL EDA USERS]: creating a pdf file from a .sch file
  • From: "Susan Yoder" <syoder@socal.rr.com>
• [PROTEL EDA USERS]: Autorouting
  • From: Tom Reineking <reineking@pasco.com>
• RE: [PROTEL EDA USERS]: Autorouting
  • From: Duane Foster <DFoster@alpha.com>
• RE: [PROTEL EDA USERS]: Translating P-CAD schematics to Protel 99SE
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Autorouting
  • From: Roger <roger@empire.net>
• [PROTEL EDA USERS]: part field use
  • From: "Evan Scarborough" <evans_cad@hotmail.com>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Kev" <protel.eda@ntlworld.com>
• RE: [PROTEL EDA USERS]: Autorouting
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• RE: [PROTEL EDA USERS]: part field use
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• [PROTEL EDA USERS]: hidden strings - how to make them visible
  • From: Rene Tschaggelar <tschaggelar@dplanet.ch>
• Re: [PROTEL EDA USERS]: part field use
  • From: Bob Fearon <bfearon@crosslinkinc.com>
• RE: [PROTEL EDA USERS]: part field use
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Evan Scarborough" <evans_cad@hotmail.com>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Kev" <protel.eda@ntlworld.com>
• RE: [PROTEL EDA USERS]: part field use
  • From: Mark Geddes <mark.geddes@windriver.com>
• [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net names?
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Kev" <protel.eda@ntlworld.com>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Kev" <protel.eda@ntlworld.com>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Steve Green" <steve@green6.freeserve.co.uk>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Steve Green" <steve@green6.freeserve.co.uk>
• Re: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net names?
  • From: "edsi" <edsi@netstorm.net>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: Report Rules - Protel holds its breath
  • From: "Linden Doyle" <ldoyle@zener.net>
• RE: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net n ames?
  • From: Yu-Ming Luo <Luo.Yu-Ming@inventec-inc.com>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Cliff Lawrence" <cliffl@arcam.co.uk>
• Re: [PROTEL EDA USERS]: Report Rules - Protel holds its breath
  • From: "Cliff Lawrence" <cliffl@arcam.co.uk>
• Re: [PROTEL EDA USERS]: Report Rules - Protel holds its breath
  • From: HxEngr@aol.com
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: "John M. Cardone" <John.M.Cardone@jpl.nasa.gov>
• Re: [PROTEL EDA USERS]: Report Rules - Protel holds its breath
  • From: Michael Schmitt <mschmitt@baumerident.com>
• Re: [PROTEL EDA USERS]: Report Rules - Protel holds its breath
  • From: "Cliff Lawrence" <cliffl@arcam.co.uk>
• RE: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net n ames?
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: part field use
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net names?
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: JMcGrath <cadcon@mail1.nai.net>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: "John M. Cardone" <John.M.Cardone@jpl.nasa.gov>
• RE: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net n ames?
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Bob Fearon <bfearon@crosslinkinc.com>
• RE: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net na mes?
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: part field use
  • From: "Kev" <protel.eda@ntlworld.com>
• [PROTEL EDA USERS]: PCB Export to Spread and Origin
  • From: Cam Andruik <CamA@HARDING.AB.CA>
• Re: [PROTEL EDA USERS]: PCB Export to Spread and Origin
  • From: "Kev" <protel.eda@ntlworld.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: "Steve Green" <steve@green6.freeserve.co.uk>
• [PROTEL EDA USERS]: Re: IEEE symbols
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• [PROTEL EDA USERS]: Quality schematics (was: part field use)
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net n ames?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Quality schematics (was: part field use)
  • From: "Kev" <protel.eda@ntlworld.com>
• Re: [PROTEL EDA USERS]: Quality schematics (was: part field use)
  • From: Clive.Broome@qsa.idt.com
• Re: [PROTEL EDA USERS]: Quality schematics (was: part field use)
  • From: "Kev" <protel.eda@ntlworld.com>
• Re: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net names?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net n ames?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: question about resizing a PC board..
  • From: rimas <rimas@cnmat.berkeley.edu>
• RE: [PROTEL EDA USERS]: Quality schematics (was: part field use)
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: question about resizing a PC board..
  • From: "Kev" <protel.eda@ntlworld.com>
• Re: [PROTEL EDA USERS]: Quality schematics (was: part field use)
  • From: "Kev" <protel.eda@ntlworld.com>
• Re: [PROTEL EDA USERS]: question about resizing a PC board..
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: Addon Server released for use with Protel 99 SE
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: Kicked from list
  • From: Ian Wilson <considered@ozemail.com.au>
• Re: [PROTEL EDA USERS]: Kicked from list
  • From: Craig Rose <craig@aspiring-technology.com>
• Re: [PROTEL EDA USERS]: question about resizing a PC board..
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: question about resizing a PC board..
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Kicked from list
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Kicked from list
  • From: Michael Schmitt <mschmitt@baumerident.com>
• [PROTEL EDA USERS]: Garbarge in protels temp folder
  • From: Michael Schmitt <mschmitt@baumerident.com>
• [PROTEL EDA USERS]: .LEGEND PCB-Printer
  • From: Michael Schmitt <mschmitt@baumerident.com>
• [PROTEL EDA USERS]: Again Special String that do not work
  • From: Michael Schmitt <mschmitt@baumerident.com>
• RE: [PROTEL EDA USERS]: Garbarge in protels temp folder
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• Re: [PROTEL EDA USERS]: question about resizing a PC board..
  • From: Peter Bennett <bennett@triumf.ca>
• Re: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net n ames?
  • From: "Mike Reagan" <edsi@netstorm.net>
• RE: [PROTEL EDA USERS]: .LEGEND PCB-Printer
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net n ames?
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: Quality schematics (was: part field use)
  • From: Mark Geddes <mark.geddes@windriver.com>
• [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Brooks Bill <bbrooks@zoneworx.com>
• Re: [PROTEL EDA USERS]: question about resizing a PC board..
  • From: "Scott Oliver" <scotte100@hotmail.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• Re: [PROTEL EDA USERS]: .LEGEND PCB-Printer
  • From: "Scott Oliver" <scotte100@hotmail.com>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: Brooks Bill <bbrooks@zoneworx.com>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: "Anderson, Roger" <roger-anderson@uiowa.edu>
• RE: [PROTEL EDA USERS]: DDB date changes (was Problem with the Design Explorer in PROTEL 99SE)
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "Kev" <protel.eda@NTLWorld.com>
• Re: [PROTEL EDA USERS]: question about resizing a PC board..
  • From: "Scott Oliver" <scotte100@hotmail.com>
• Re: Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "tony@encoreelectronics.com"<tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "tony@encoreelectronics.com"<tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: Brooks Bill <bbrooks@zoneworx.com>
• RE: [PROTEL EDA USERS]: P99SE Update PCB, macro bug? P99SE net n ames?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: .LEGEND PCB-Printer
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "Terri Rothwell" <TerriR@appliedmicro.com>
• [PROTEL EDA USERS]: Simple Macros
  • From: Eric Albach <EricA@airswitch.com>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: DDB date changes (was Problem with the Design Explorer in PROTEL 99SE)
  • From: Terry Harris <terry.harris@iname.com>
• RE: Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Brooks Bill <bbrooks@zoneworx.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: Daniel Webster <danielw@natech.com>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: Brooks Bill <bbrooks@zoneworx.com>
• RE: Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "Terri Rothwell" <TerriR@appliedmicro.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "Mike Fessler" <mfessler@kcp.com>
• Re: [PROTEL EDA USERS]: One voice in cyber space !
  • From: Mel Burk <burk@pasco.com>
• Re: [PROTEL EDA USERS]: File in use - Problem with the Design Explorer in PROTEL 99SE
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: lloyd.good@ps.ge.com
• RE: Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Brooks Bill <bbrooks@zoneworx.com>
• Re: [PROTEL EDA USERS]: Quality schematics (was: part field use)
  • From: "Kev" <protel.eda@NTLWorld.com>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTE L 99SE
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: Simple Macros
  • From: "Kev" <protel.eda@NTLWorld.com>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: "Anderson, Roger" <roger-anderson@uiowa.edu>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: Andrew J Jenkins <andrew.jenkins@grc.nasa.gov>
• Re: [PROTEL EDA USERS]: question about resizing a PC board..
  • From: Ian Wilson <considered@ozemail.com.au>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: Ian Wilson <considered@ozemail.com.au>
• Re: [PROTEL EDA USERS]: Simple Macros
  • From: Ian Wilson <considered@ozemail.com.au>
• Re: [PROTEL EDA USERS]: One voice in cyber space !
  • From: "Kev" <protel.eda@NTLWorld.com>
• RE: Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "Frank Bemelman" <fbemel@euronet.nl>
• Re: [PROTEL EDA USERS]: One voice in cyber space !
  • From: Terry Harris <terry.harris@iname.com>
• RE: [PROTEL EDA USERS]: Quality schematics (was: part field use)
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: Simple Macros
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "Linden Doyle" <ldoyle@zener.net>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: "Mark Koitmaa" <Mark@techservinc.com>
• Re: [PROTEL EDA USERS]: Simple Macros
  • From: Eric Albach <EricA@airswitch.com>
• Re: [PROTEL EDA USERS]: One voice in cyber space !
  • From: "Kev" <protel.eda@NTLWorld.com>
• RE: Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Rusty Garfield <garfield@sugar-land.spc.slb.com>
• [PROTEL EDA USERS]: Improvements to P99SE.
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: Rusty Garfield <garfield@sugar-land.spc.slb.com>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: lloyd.good@ps.ge.com
• Re: [PROTEL EDA USERS]: Simple Macros
  • From: "Kev" <protel.eda@NTLWorld.com>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: "Steve Green" <steve@green6.freeserve.co.uk>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "Sanders, Dave" <dave.sanders@dsto.defence.gov.au>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor (lower right corner) worki ng?
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: "Sanders, Dave" <dave.sanders@dsto.defence.gov.au>
• RE: [PROTEL EDA USERS]: Simple Macros
  • From: "D. Chris Mackensen" <dcm@blueskydevice.com>
• [PROTEL EDA USERS]: Spreadsheets...There and back again.
  • From: "Linden Doyle" <ldoyle@zener.net>
• RE: [PROTEL EDA USERS]: Spreadsheets...There and back again.
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• RE: Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• Re: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor (lower right corner) worki ng?
  • From: "Cliff Lawrence" <cliffl@arcam.co.uk>
• RE: [PROTEL EDA USERS]: One voice in cyber space !
  • From: "Wolfgang Geier" <Wolfgang.Geier@jumptec.de>
• Re: [PROTEL EDA USERS]: One voice in cyber space !
  • From: Wamnet@aol.com
• [PROTEL EDA USERS]: Via identification
  • From: Edi Im Hof <edi.imhof@ihe.ch>
• Re: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor (lower right corner) worki ng?
  • From: "Brad Marshall" <bmarshal@subsite.com>
• RE: [PROTEL EDA USERS]: Improvements to P99SE.
  • From: lloyd.good@ps.ge.com
• Re: [PROTEL EDA USERS]: Autorouting
  • From: Tom Reineking <reineking@pasco.com>
• RE: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor ( lower right corner) worki ng?
  • From: "Jaurique, Brad" <BJaurique@pelco.com>
• [PROTEL EDA USERS]: Protel Liscense
  • From: Bob Fearon <bfearon@crosslinkinc.com>
• RE: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor ( lower right corner) working?
  • From: Brad Velander <BVelander@norsat.com>
• RE: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor (lower right corner) working?
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• [PROTEL EDA USERS]: Duplicate Pin Numbers
  • From: "Scott Oliver" <scotte100@hotmail.com>
• Re: [PROTEL EDA USERS]: question about resizing a PC board..
  • From: "Scott Oliver" <scotte100@hotmail.com>
• RE: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor ( lower right corner) working?
  • From: "Jaurique, Brad" <BJaurique@pelco.com>
• Re: [PROTEL EDA USERS]: Via identification
  • From: HxEngr@aol.com
• Re: [PROTEL EDA USERS]: question about resizing a PC board..
  • From: Peter Bennett <bennett@triumf.ca>
• RE: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor ( lower right corner) working?
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: One voice in cyber space !
  • From: "Kev" <protel.eda@NTLWorld.com>
• Re: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor ( lower right corner) working?
  • From: "Brad Marshall" <bmarshal@subsite.com>
• RE: [PROTEL EDA USERS]: P99SE Help Advisor, FIXED!
  • From: Brad Velander <BVelander@norsat.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Eric Albach <EricA@airswitch.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Assembly Drawings
  • From: "Diana Jackson" <djackson@gmsiworld.com>
• Re: [PROTEL EDA USERS]: Simple Macros
  • From: "Kev" <protel.eda@ntlworld.com>
• Re: [PROTEL EDA USERS]: Assembly Drawings
  • From: "Kev" <protel.eda@ntlworld.com>
• RE: [PROTEL EDA USERS]: Addon Server released for use with Protel 99 SE
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Assembly Drawings
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: "Steve Green" <steve@green6.freeserve.co.uk>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Eric Albach <EricA@airswitch.com>
• RE: [PROTEL EDA USERS]: What's in a name
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: "Steve Green" <steve@green6.freeserve.co.uk>
• RE: [PROTEL EDA USERS]: Assembly Drawings
  • From: "Jeff Jolie" <jeff@neame.com>
• RE: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor ( lower right corner) worki ng?
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: "Steve Green" <steve@green6.freeserve.co.uk>
• RE: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor ( lower right corner) worki ng?
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Simple Macros
  • From: Duane Foster <DFoster@alpha.com>
• RE: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor ( lower right corner) worki ng?
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: Assembly Drawings
  • From: "Le, Phan" <PLe@ALPHA.CA>
• RE: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor working?
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• SV: [PROTEL EDA USERS]: Protel Liscense
  • From: "Peder K. Hellegaard" <pkh@mediatronic.dk>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Phillip Stevens <pstevens@capecod.net>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "Frank Bemelman" <fbemel@euronet.nl>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "Kev" <protel.eda@ntlworld.com>
• RE: Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Problem with the Design Explorer in PROTEL 99SE
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• Re: SV: [PROTEL EDA USERS]: Protel Liscense
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Protel kills email ?!?!?!?
  • From: "D. Chris Mackensen" <dcm@blueskydevice.com>
• RE: [PROTEL EDA USERS]: Problem with the Design Explorer in PROT EL 99SE
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Assembly Drawings
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: What's in a name
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Assembly Drawings
  • From: Ian Wilson <considered@ozemail.com.au>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: "Steve Green" <steve@green6.freeserve.co.uk>
• Re: [PROTEL EDA USERS]: Gerbers?
  • From: Ian Wilson <considered@ozemail.com.au>
• RE: [PROTEL EDA USERS]: Comment on the DDB
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• [PROTEL EDA USERS]: print function
  • From: Amy Nolen <ANolen@RFMD.com>
• Re: [PROTEL EDA USERS]: Assembly Drawings
  • From: Mel Burk <burk@pasco.com>
• RE: [PROTEL EDA USERS]: Via identification
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: What's in a name
  • From: Mark Geddes <mark.geddes@windriver.com>
• Re: [PROTEL EDA USERS]: Assembly Drawings
  • From: Rusty Garfield <garfield@sugar-land.spc.slb.com>
• [PROTEL EDA USERS]: Re: Protel Liscense
  • From: Bob Fearon <bfearon@crosslinkinc.com>
• RE: [PROTEL EDA USERS]: print function
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: What's in a name
  • From: Susan Scott <SusanS@Phonon.com>
• Re: [PROTEL EDA USERS]: Addon Server released for use with Protel 99 SE
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Addon Server released for use with Protel 99 SE
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Addon Server released for use with Protel 99 SE
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Addon Server released for use with Protel 99 SE
  • From: "Andrew W. Riley III" <drewmeister3@earthlink.net>
• RE: [PROTEL EDA USERS]: Trouble accessing egroup file the "easy" way
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]:Spotted a bug with EDA client
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Assembly Drawings
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Addon Server released for use with Protel 99 SE
  • From: "djmoore" <djmoore@tpgi.com.au>
• [PROTEL EDA USERS]: Toolbar aspects (ex Re: Spotted a bug with EDA client)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Trouble accessing egroup file the "easy" way
  • From: "Andrew W. Riley III" <drewmeister3@earthlink.net>
• RE: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]:Spotted a bug with EDA client
  • From: "Andrew W. Riley III" <drewmeister3@earthlink.net>
• Re: [PROTEL EDA USERS]:Spotted a bug with EDA client
  • From: "Chris Mogford" <chris.mogford@varianinc.com>
• RE: [PROTEL EDA USERS]:More trouble with P99SESP5 and gerber read back
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: Has anybody got the P99SE Help Advisor (lower right corner) working?
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: ***Simulation: components Spice engine parameters alterations************
  • From: "Pissavin hubert" <hubert.pissavin@scoresoft.com>
• RE: [PROTEL EDA USERS]: ***Simulation: components Spice engine parameters alterations************
  • From: "Jean-Charles Montavon" <Jean-Charles.Montavon@compex.ch>
• [PROTEL EDA USERS]: Single layer board
  • From: "Newton Fukue" <nyu@ajato.com.br>
• Re: [PROTEL EDA USERS]: Single layer board
  • From: HxEngr@aol.com
• RE: [PROTEL EDA USERS]: Single layer board
  • From: Steve Smith <smiths@stacoenergy.com>
• Re: [PROTEL EDA USERS]: Single layer board
  • From: David_Watling@Mitel.COM
• Re: [PROTEL EDA USERS]: Single layer board
  • From: Terry Harris <terry.harris@iname.com>
• Re: [PROTEL EDA USERS]: Trouble accessing egroup file the "easy" way
  • From: Terry Harris <terry.harris@iname.com>
• RE: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• Re: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: HxEngr@aol.com
• [PROTEL EDA USERS]: Hello
  • From: "HIEN-MINH HUYNH" <mhuynh1999@hotmail.com>
• RE: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: Hello
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: Hello
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: Hello
  • From: "Nicholas Piccinich" <piccinichn@blackhawkmgmt.com>
• RE: [PROTEL EDA USERS]: Hello
  • From: "Nicholas Piccinich" <piccinichn@blackhawkmgmt.com>
• RE: [PROTEL EDA USERS]: Hello
  • From: Robison Michael R CNIN <Robison_M@crane.navy.mil>
• RE: [PROTEL EDA USERS]: Hello
  • From: "Le, Phan" <PLe@ALPHA.CA>
• RE: [PROTEL EDA USERS]: Hello
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Virtual Short
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• RE: [PROTEL EDA USERS]: Hello
  • From: Mark Geddes <mark.geddes@windriver.com>
• RE: [PROTEL EDA USERS]: print function
  • From: Amy Nolen <ANolen@RFMD.com>
• [PROTEL EDA USERS]: Orcad-style port objects (with sheet reference) in Protel?
  • From: "Drew Lundsten" <drew@ccpu.com>
• Re: [PROTEL EDA USERS]: print function
  • From: "Jeff Lewis" <jeff@idea-logic.com>
• RE: [PROTEL EDA USERS]: Hello
  • From: Robison Michael R CNIN <Robison_M@crane.navy.mil>
• RE: [PROTEL EDA USERS]: Hello
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Virtual Short
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Simple Macros
  • From: Eric Albach <EricA@airswitch.com>
• Re: [PROTEL EDA USERS]: Virtual Short
  • From: "Hamid A. Wasti" <hamid@regandesigns.com>
• RE: [PROTEL EDA USERS]: Hello
  • From: "Le, Phan" <PLe@ALPHA.CA>
• RE: [PROTEL EDA USERS]: Addon Server released for use with Protel 99 SE
  • From: "Terri Rothwell" <TerriR@appliedmicro.com>
• RE: [PROTEL EDA USERS]: Single layer board
  • From: "Terri Rothwell" <TerriR@appliedmicro.com>
• Re: [PROTEL EDA USERS]: Orcad-style port objects (with sheet reference) in Protel?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• [PROTEL EDA USERS]: Re: PLD support
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Hello
  • From: Clive.Broome@qsa.idt.com
• RE: [PROTEL EDA USERS]: Duplicate Pin Numbers
  • From: "Scott Oliver" <scotte100@hotmail.com>
• Re: [PROTEL EDA USERS]: Hello
  • From: "Jeff Stout" <jstout@ncon.com>
• Re: [PROTEL EDA USERS]: Hello
  • From: Dave Potter <dpotter@mwt.net>
• Re: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: Roger <roger@empire.net>
• RE: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: Bruce Walter <BWalter@davisnet.com>
• Re: [PROTEL EDA USERS]: print function
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: Selection in Schematic Editor (ex Re: One dialog box is "odd")
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Hello
  • From: Robison Michael R CNIN <Robison_M@crane.navy.mil>
• Re: [PROTEL EDA USERS]: Addon Server released for use with Protel 99 SE
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Re: PLD support
  • From: Robison Michael R CNIN <Robison_M@crane.navy.mil>
• [PROTEL EDA USERS]: Request to truncate replied to postings (ex Re: Hello)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: Roger <roger@empire.net>
• Re: [PROTEL EDA USERS]: One dialog box is "odd"
  • From: Roger <roger@empire.net>
• Re: [PROTEL EDA USERS]:More trouble with P99SESP5 and gerber read back
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Single layer board
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• Re: [PROTEL EDA USERS]: Re: PLD support
  • From: Roger <roger@empire.net>
• RE: [PROTEL EDA USERS]: Re: PLD support
  • From: Robison Michael R CNIN <Robison_M@crane.navy.mil>
• RE: [PROTEL EDA USERS]: Addon Server released for use with Protel 99 SE
  • From: "Terri Rothwell" <TerriR@appliedmicro.com>
• [PROTEL EDA USERS]: Standardized Settings: Design Rules, Print settings, CAM settings, etc...
  • From: "Diana Jackson" <djackson@gmsiworld.com>
• Re: [PROTEL EDA USERS]: Orcad-style port objects (with sheet reference) in Protel?
  • From: Rusty Garfield <garfield@sugar-land.spc.slb.com>
• RE: [PROTEL EDA USERS]: Request to truncate replied to postings (ex Re: Hello)
  • From: Bruce Walter <BWalter@davisnet.com>
• Re:[PROTEL EDA USERS]: Standardized Settings: Design Rules,
  • From: nick_hoskings@devlin.co.uk
• RE: [PROTEL EDA USERS]: Standardized Settings: Design Rules,
  • From: "Diana Jackson" <djackson@gmsiworld.com>
• Re: [PROTEL EDA USERS]: Request to truncate replied to postings (ex Re: Hello)
  • From: Peter Bennett <bennett@triumf.ca>
• Re: [PROTEL EDA USERS]: Standardized Settings: Design Rules, Print settings, CAM settings, etc...
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• RE: [PROTEL EDA USERS]: Request to truncate replied to postings (ex Re: Hello)
  • From: "Andy Gulliver" <andy.gulliver@crossprod.co.uk>
• RE: [PROTEL EDA USERS]: Request to truncate replied to postings (ex Re: Hello)
  • From: Bruce Walter <BWalter@davisnet.com>
• [PROTEL EDA USERS]: Place Part bug/annoyance
  • From: Peter Bennett <bennett@triumf.ca>
• Re: [PROTEL EDA USERS]: Orcad-style port objects (with sheet reference) in Protel?
  • From: Rusty Garfield <garfield@sugar-land.spc.slb.com>
• RE: [PROTEL EDA USERS]: Hello
  • From: Robison Michael R CNIN <Robison_M@crane.navy.mil>
• RE: [PROTEL EDA USERS]: Selection in Schematic Editor (ex Re: On e dialog box is "odd")
  • From: Duane Foster <DFoster@alpha.com>
• RE: [PROTEL EDA USERS]: Request to truncate replied to postings (ex Re: Hello)
  • From: Andrew J Jenkins <andrew.jenkins@grc.nasa.gov>
• Re: [PROTEL EDA USERS]:More trouble with P99SESP5 and gerber read back
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Re: PLD support
  • From: Jon Elson <jmelson@artsci.wustl.edu>
• [PROTEL EDA USERS]: Library Update
  • From: "Protelcsc" <protelcsc@protel.com.au>
• [PROTEL EDA USERS]: Pad Master (plot)layers (ex Re: More trouble with P99SESP5 and gerber read back)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Addon Server released for use with Prote l 99 SE
  • From: "Jenkins, Charlie" <JENKINSC@PIOS.COM>
• [PROTEL EDA USERS]: FYI: Another Protel Archive
  • From: "Andrew W. Riley III" <drewmeister3@earthlink.net>
• [PROTEL EDA USERS]: Re: Simple Macros
  • From: "Protelcsc" <protelcsc@protel.com.au>
• Re: [PROTEL EDA USERS]: Simple Macros
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• [PROTEL EDA USERS]: Special Solder Paste
  • From: blmarshall2@mmm.com
• [PROTEL EDA USERS]: Exclude Part from PCB
  • From: "Melvin Stevens" <mstevens@dqbbs.com>
• Re: [PROTEL EDA USERS]: Special Solder Paste
  • From: Ian Wilson <considered@ozemail.com.au>
• Re: [PROTEL EDA USERS]: Special Solder Paste
  • From: Ian Wilson <considered@ozemail.com.au>
• Re: [PROTEL EDA USERS]: Exclude Part from PCB
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• RE: [PROTEL EDA USERS]: Place Part bug/annoyance
  • From: Mark Geddes <mark.geddes@windriver.com>
• [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: "Frank Bemelman" <fbemel@euronet.nl>
• [PROTEL EDA USERS]: another question
  • From: Amy Nolen <ANolen@RFMD.com>
• [PROTEL EDA USERS]: CAM TASTIC QUESTIONs
  • From: "Vinh Ho" <vinh_ho@hotmail.com>
• Re: [PROTEL EDA USERS]: Special Solder Paste
  • From: Simon Peacock <simon3535@yahoo.com>
• Re: [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: Simon Peacock <simon3535@yahoo.com>
• Re: [PROTEL EDA USERS]: another question
  • From: Simon Peacock <simon3535@yahoo.com>
• [PROTEL EDA USERS]: Database Access
  • From: "Robert Wills" <RWills@AdvancedEnergy.com>
• Re: [PROTEL EDA USERS]: CAM TASTIC QUESTIONs
  • From: "Brad Marshall" <bmarshal@subsite.com>
• [PROTEL EDA USERS]: E-mail address change
  • From: Brooks Bill <bbrooks@zoneworx.com>
• RE: [PROTEL EDA USERS]: another question
  • From: Duane Foster <DFoster@alpha.com>
• RE: [PROTEL EDA USERS]: Database Access
  • From: "Mike Ingle" <mikei@ancore.com>
• Re: [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: "Frank Bemelman" <fbemel@euronet.nl>
• Re: [PROTEL EDA USERS]: Re: Simple Macros
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• Re: [PROTEL EDA USERS]: Special Solder Paste
  • From: Abd ul-Rahman Lomax <marjan@vom.com>
• RE: [PROTEL EDA USERS]: Database Access
  • From: "djmoore" <djmoore@tpgi.com.au>
• RE: [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: Customized settings files (Was: another question)
  • From: "Dwight Harm" <dwighth@traxsoft.com>
• [PROTEL EDA USERS]: Service Patches (ex Re: Special Solder Paste)
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Special Solder Paste
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• Re: [PROTEL EDA USERS]: Place Part bug/annoyance
  • From: "Geoff Harland" <gharland@ingenico.com.au>
• RE: [PROTEL EDA USERS]: Database Access
  • From: "Brad Shea" <brad.shea@aesltd.com.au>
• RE: [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• [PROTEL EDA USERS]: Auto routing a single layer bord
  • From: "Newton Fukue" <nyu@ajato.com.br>
• Re: [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: Dennis Saputelli <dsicon@integratedcontrolsinc.com>
• RE: [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: Gaetan Fournier <FournierG@kantech.com>
• RE: [PROTEL EDA USERS]: Database Access
  • From: "Robert Wills" <RWills@AdvancedEnergy.com>
• RE: [PROTEL EDA USERS]: Place Part bug/annoyance
  • From: Mark Geddes <mark.geddes@windriver.com>
• [PROTEL EDA USERS]: IMPORT NETLIST TO A DATABASE
  • From: guoqing xiao <gxiao@pacbell.net>
• [PROTEL EDA USERS]: improving Knowledge Base
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• Re: [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: "Frank Bemelman" <fbemel@euronet.nl>
• [PROTEL EDA USERS]: the One True sort order
  • From: "David Cary" <dcary@Brunswickoutdoor.com>
• Re: [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: "Keith Rippon" <krippon@mail.usyd.edu.au>
• RE: [PROTEL EDA USERS]: how to place logo's or bitmaps ?
  • From: "Tony Karavidas" <tony@encoreelectronics.com>
• RE: [PROTEL EDA USERS]: IMPORT NETLIST TO A DATABASE
  • From: Yu-Ming Luo <Luo.Yu-Ming@inventec-inc.com>