undefined

General Modifications:

Slingstrap:

To make a good Sling, Take two Shoetrings, tie around the front and back of the gun. tape it down good. Then take a military web-gun sling and clip it on

Sniper Rifle Bipod:

To make a Sniper Rifle Bibod for your gun. Take two metel polls of equal length. Then take 5 Long strips of duct tape and tape or screw them together at one end. and then take that end and tape it to the bottom side of the gun. Put the Tape In an X path several times through the middle of the seam. And there you have it! A Bipod

Nozzle Modifications:

If You have a gun you'd like to make a nozzle a bit larger or smaller then read the steps below.

Larger Nozzle:

1. Get a Cordless drill and a pencil
2. Get the smallest drill bit you have
3. Mark the circumfrance of the nozzle size you want.
4. Drill on the line and let the peice of plastic fall out

Smaller Nozzle:

1. Get a Small cordless drill, with a small bit and a pencil
2. Fill the nozzle in with apoxy
3. Let it harden
4. Draw the Circumfrance of the nozzle.
5. Drill along the line and then let the peice of apoxy fall out.

More To Come....