Complete RC Car Inertia Chassis Dynamometer.

The IDPRC4 package consists of:

• IDERC4 data acquisition unit, 4 input channel:
• 1 roller speed input (Engine Torque could be calculated if gear ratio is provided). 
• 1 Engine RPM input 
• 2 auxiliary analogue channel inputs 0-5V / 60Hz 
• inductive pickup to measure roller rpm. 
• installation cables and sensors 
• Latest RacingDyno software (on CD or downloaded to your PC). 
• High Quality Engine Test Stand

Features

For small-scale RC dynamometers, more and more of REAL racing car technology is transferred to scale cars. We believe that the performance tools for the cars should also brought to small scale. With the same physics as motorcycle and car dynamometers, we proudly bring you the dynamometers for RC cars.

• Ready to run complete Go Kart Inertia Engine Dynamometer.
• Inertia Dynamometer for accurate reading.
• Excellent for testing and tuning. 
• Test any type of engine, nitro or electric (if transfer of the torque to the flywheel is possible ). 
• Excellent addition to any performance enthusiast at home, shop or club. 
• Find exact settings for an engine in minimal time.
• Also suitable for small engines , mowers, chain saw, pocket bikes, small capacity 125cc motorcycles.

Engine Test Stand

Platform

• Suitable for 2.5HP (up to 5HP)
• Supports up to 400mm wide, and 365mm wheelbase.
• Adjustable wheelbase between 240mm and 365mm.
• Approximate weight 10 kg.
• Platform for 2-wheel or 4-wheel test.
• Terminal speed 160Km/h (platform).
• Fully factored max load on the axis 40 kg. 
• Dimensions 480mm x 665mm x 140 mm

• Properly machined for practical test duration of 7 to 14 seconds
• Diameter 100mm to 140mm 
• Wide 400 mm
• Roller weight of 24.81 to 25.33 kg. 
• Inertia 0.031023221 to 0.0364 kg.m2
• Optional Inertia Discs also available.

• Built In Engine Starter System
• Flywheel Brake System ( Needed for 2 stroke engines).
• Additional left controller for external switch (NOS, Timers, Counters, etc)

Electronic Hardware

The IDPRC4 use the IDERC4 4 Channel Dynamometer Electronics kit. 

• 10 bits accuracy Data Acquisition Board
• 2 auxiliary channel inputs 0-5V / 60Hz, suitable for Engine RPM, Volts, Temp, CO, O2, etc 
• Channel 2 is used for External Engine RPM input

Software

The IDPRC4 use the RacingDyno software for windows.  Its development is based on over then 5 years of user feedback and research. It is very powerful and easy to use.

• 10 bits accuracy Data Acquisition Board
• Engine RPM, Volts, Temp, CO, O2, etc  and other parameters available with use of additional channel. RacingDyno software supported)
• RacingDynoSoftware available for Roller RPM. (Torque is derived from engine gear ratio).
• Real time on screen display test results. Tests appears in the screen while the engine accelerates. 
• See graphs simultaneously: show or hide any curve. 
• Really accurate and detailed curves: detect engine failures easily.