CORE STORAGE ALIGNING PROCEDURE(INPUT BOAT)

INPUT QUAD
A. QUAD X
  1. QUAD X HOMED
  2. POSITION QUAD X INSIDE CORE
  3. ENLARGE QUAD LOCATING PIN AND THE BOAT QUAD GUIDE PIN TOGETHER MAKING SURE THAT THE QUAD 
     LEVELLER SHOULD LIE FLAT ON THE BOAT THEN
  4. JAG THE INPUT QUAD MOTOR WITH BOAT FROM BOAT HARDSTOP TO 60 MILS SPACE(SIZE OF SMALLEST  
     ALLEN KEY-ENGLISH)

B. HEAD
  1. JAG THE HEAD MOTOR INSIDE CORE POSITION, AND MAKE IT THAT THE QUAD LEVELLER WOULD LIE FLAT
     ON THE BOAT SURFACE.
  
C. OTHERS
  1. MANIFOLD TIP SHOULD SLIDE THRU THE STORAGE BRIDGE MANIFOLD POSITIONER W/O HITTING EITHER
     SIDE OF IT.

TOP SLIDE
  >AT RETRACT POSITION JAG THE MOTOR ASSEMBLY(EXTEND POSITION)UNTIL IT GOT CONTACT WITH THE BOAT
   MIGHT AS WELL THAT THE BOAT WOULD ALSO HIT THE HARDSTOP THEN JAG THE MOTOR TO THE RIGHT
   0.06 INCHES OR 60 MILS, SAVE AS EXTEND POSTION.