FLEX IMPORTANT POINTS
COMMUNICATION
>PIN # 1 AND PIN # 2 RESISTANCE SHOULD BE 100 OHMS OR LESS GREATER LINE IS OPEN
>5 v required for communication.
>BAD CPU-HOT TO TOUCH
---------------------
| 68000 MASTER BOARD |
---------------------
|
------------------------------------------------------------------------------------------------------------
| | | | | | | |
SLAVE1:INPUT SLAVE2:CORE SLAVE3:SORT SLAVE4:ATU/AIM SLAVE8:TEMP SLAVE9:DUALDC SLAVEA:DUALDC SLAVED:ATU/AIM
ss3: X mtr ssf:pwr sup ss2:head2 ss4:atu ctrl testsite CCW fan CW fan ss4:atuctrl
XYZ ctrl RTD
(safety sw.
connected)
CF6091
PGA Critical
ss7:reject ss5:jaws ss1:head1 ss1:upper storage CCW fan testsite ss1:upper
sleeve sw. motor shuttle mtr site RTD air valve shuttle mtr
CF11270
ss4: Y mtr ss6:rotate ssa:def ss2:lower main heat ss2:lower
XYZ motor htr ctrl shuttle mtr SSR shuttle mtr
CF6096
PGA
ss1:head1 ss8:pickup ss3:X mtr ss3:elevator storage ss3:elevator
XYZ motor XYZ motor LN2 motor
CF600
PGA
ss2:head2 ss7:lateral ss4:Y mtr testsite
XYZ motor XYZ LN2
ss9:pick ss4:input ss7:LCD sw testsite
sensor lift heater
ss5:X mtr ss3:output ss6:sleeve
QUAD lift mtr
CF2667
PGA
ss6:head mtr ss1:top ss5:boat
QUAD slide X motor
CF5365
PGA
ssc:nest ss2:bottom ss9:head safety sw.connected
sensor slide sensor
ssa:gauge ss9:LCD sw ss8:sleeve
block LCD
ssb:flag sse:chuck ssf:PWR sup
sensor sensor ctrl
ssf:PWR ssa:1st
sup ctrl contactor
ssb:2nd
contactor
ssc:3rd
contactor
ssd:4th
contactor
POWER SUPPLY
>12VDC FOR LEDS, SMALL MOTORS, MICROSTEPPER MOTOR CONTROL, CRT ETC.
>24VDC FOR LAMPS, SOLENOIDS, MOTOR CONTROL
>WIRE CABLE COLOR CODING
RED-5 V
YELLOW-12V
ORANGE-24V
VIOLET-48V
MOTOR FAILURE TO MOVE
a. WORKING BOARD
1. POWER TO BOARD
a. MICRO STEPPERS REQUIRE 12VDC AND 48 VDC TO MOVE MOTOR
b. ALL BOARDS REQUIRE 5, 12, 24, 48 VDC TO OPERATE FULLY
c. POWER CONNECTIONS HAVE DC RETURN PIN #1 AND PIN#9
b. CONSIDER CONNECTION TO WORKING BOARD:POWER AND CONTROL TO MOTOR
1. DC FANS REQUIRE 24VDC
2. STEPPER/MICROSTEPPER-48 VDC