MEGAONE NOTES

• Parity error at megaone 7
  • At production menu(happens at start of lot)
  • type control C(halts)
  • Type Megadebug;(enter) instruction appears with ready now
  • Type: plset(3);enter
  • type:q;
  • type: Go(enter)
  
  
• Calibration of TG boards/PE boards at failing channel say 27
  • get command tool, then % diags or diag_menu
  • Go to interactive(i) selection
  • Find TG calibration, numbers are selected to calibrate
  • Note: Loof for TG board that corresponds to the failing channel also for PE board look for the same channel
  
  
• No test on RFS handler
  • goto menu(pressing enter)
  • select M
  • select H
  • select Z- menu to insert device(note if tester indicates waiting device to be inserted then handler is the problem- just power cycle handler)