MTEST TOP 3 JAMS ROOT CAUSES
JAM 44 ACTION PLAN
PLCC
1. Turn shuttle alignment
2. Plunger and lower stopper alignment.....................1/2=Regular Contact blockPM
3. Contactor riegel not holding all contact pins...........lengthen riegel
4. Contactor mushroom too high.............................standardize mushroom height
5. Worn-out contact pins...................................regular replacement
6. Un-upgraded K-C faceplate...............................upgrade
PDIP
1. Turn shuttle alignment
2. Plunger alignment
3. Catwalk clearance.......................................1/2/3=regular PM of CB
4. Unupgraded 64YS contactor...............................upgrade with no divider
JAM 62
1. Sort shuttle alignment
2. Nod shuttle alignment
3. Worn-out precission washers
4. Worn-out linear bearing..................................1-4=PM regular
JAM 24
1. Input magazine horizontal alignment
2. Vertical alignment
3. Worn-out release gate springs
4. Worn-out release gate wedge
5. Singulator clearance for PDIP............................1-5=Pm regular