Detailing Continued with Boats:
|
|
| 2000
Velocity & Silverado
|
If you own a boat you know it can be a hassle to wash your boat with hoses and brushes epically if you have to wax it. Sure you have lots of water around to use but you don't need it. My boat is 26' long I use regular dri-wash and metal polish on all the fiberglass. Leaves a great shine and gets all the marine growth off as well with out corrosive acids (Takes about 1hr per side). (click on pics for bigger image)
As seen here the yellow marine growth below the water line does not come off with just water and usually requires a chemical or lots of cleaners. |
With dri-wash your cleaning and polishing is done in one step. Spray some dri-wash on the area, and a little metal polish on the rag. Then just wipe the scum off and buff to a shine with a dry towel. |
|
Shown here is a small area of the stern, I already cleaned with dri-wash to prove I did not wash it before hand. Below the clean spot is marine growth, to the right is soot from the engine. Both can be removed easily with dri-wash. |
Have a bigger cruiser style boat no problem check out this page Boats continued
