ELMAT Automatic Injection Moulding Machine | ||||
|
||||
INJECTION UNIT | ||||
Dia of Screw | mm | 50 | 55 | 60 |
Stroke of Screw | mm | 230 | ||
Rate of Injection | G/sec. | 300 | 364 | 433 |
Recovery Rate | G/Sec. | 36 | 41 | 47 |
Stroke Volume of Screw | cm3 | 451 | 546 | 650 |
Max weight of Injection | Gms. | 408 | 494 | 588 |
Specific Injection Pressure | Kg/cm2 | 1808 | 1486 | 1250 |
Stroke of Nozzel | mm | 300 | ||
Nozzel Contact Pressure | MT | 6.4 | ||
Heating Capacity | kw | 12.8 | ||
Screw Speed | rpm | 50-230 | ||
LOCKING UNIT | ||||
Locking force | MT | 200 | ||
Stroke | mm | 500 | ||
Mould platen total size h x v | mm | 760 x 760 | ||
Distance between tie bars h x v | mm | 500 x 500 | ||
Height of Mould Max. | mm | 550 | ||
Height of Mould Min. | mm | 200 | ||
Max. Day Light | mm | 1050 | ||
Diameter of Tie Bars | mm | 95 | ||
Hydraulic Ejector Stroke/Force | mm/MT | 130/4.5 | ||
DRIVE | ||||
Motor for Pump drive | Kw | 22.5 | ||
Oil filing | Litr. | 500 | ||
© Copyrigth ELMAT |
||||
|