Victorian Love
By
Advanced Level
What you will need to do this tutorial:
Let's Get Started
1. Open 400x400 transparent image.
YOU ARE DONE~
Thank you so much for doing my tutorial I really hope you liked it and had FUN~ doing the tutorial. If you have any questions please click below and I will be glad to help in any way I can.
Carol
If you have any Questions
To Visit My Favorite Web Sites
Click on the Tags below
Web Page Created By Angel Breezes (Carol) Copyright © 2001 by Angel Breezes,
all rights reserved
CC
Carol Walters
All Rights Reserved
1. PSP 7
2. Examples needed for Tutoial. Download and open in PSP.
3. Tubes and graphic. Download and open in PSP.
4. Ulead Art Texture:
If you don't have Ulead Art Texture
use Flaming Pear Blade Pro Select a Gold Preset.
2. Open heart on sides template ggk.psp go to Edit>Copy.
3. Click on transparent image to make it active. Go to Edit>Paste As A New Layer.
4. Go to Selections>Select All.
5. Go to Selections>Float. You will have marching ants all around the frame.
6. In top Color Palette select solid color White. Flood fill the marching ants.
7. Go to Effects>Plug Ins>Ulead>Art Texture. When the pop up box appears select Edit then Select Palette 12. When original window in Ulead appears select Pattern Template 5. Example in zip file open in PSP. Click ok. Deselect Ants
8. Open Easter Couple (Woman)_KK.psp go to Edit>Copy.
9. Click on working image go to Edit>Paste As A New Layer.
10. Go to Effects>3D Effects>Drop Shadow Settings: V & H 5 Opacity 50 Blur 25 Color Black. Click ok.
11. Open Easter Couple (Male)_KK.psp repeat steps 8 through 10.
12. Go to Layer Palette and highlight Layer 1. Go to Layers>New Rastar click ok.
13. Click on Selection Tool>Settings>Ellipse>Feather 0>Antialias check mark.
14. Drawing a Oval Shape on the working image. It doesn't matter if it is exact we will fix that in just a moment.
15. Open DHSpongeStrip~KK.jpg in PSP.
16. Go to top Color Palette select Pattern>Select the above pattern and flood fill the marching ants.
17. Click on Deformation Tool now working on the squares in the Deformation Tool move them in and down around the frame. If you have a corner that is over hold down the shift key go to the corner of the Deformation Tool and move till the entire flood fill image is behind the frame.
18. Go to Selections>Float your marching ants will now move around the flood fill area.
19. Go Effects>3D Effects>Cut Out Settings: V & H 5 Opacity 50 Blur 50 Color Black click ok. Deselect the marching ants.
20. Open JAG Feather Pen~KK.psp go to Edit>Copy.
21. Click On Working Image go to Edit>Paste As A New Layer.
22. Repeat Drop Shadow settings from Step 10.
23. Go To Layers>Merge>Visible.
24. Go to File>Save As>V1.psp.
25. Go to Edit>Undo>Merged Layers>
26. Open JAG Feather Pen~KK2.psp. Go to Edit>Copy.
27. Click on working image and go to Edit>Paste>As A New Layer.
28. Move the ink well on top of the one with the feather. Repeat Drop Shadow as in Step 10.
25. Go to Layer Palette on Layer 6 click on the eye glasses so you have a Red X. Now all you should see on the working image is the ink well that has no feather.
26. Open KK_Feather~JB.psp go to Edit>Copy.
27. Click on working image go to Edit>Paste>As A New Layer.
28. Go to Layer Palette and highlight layer 7. Go to Layers>New Rastar in name area type in TEXT.
29. Click on Text Tool.
30. In Text Box select your favorite font the size will depend on the font you select. I used Font Saginaw Size 24 Color HTML #F57862. Then type in I Love You.
31. Move the feather to the end of the letter "U"
32. Hold Down Your Shift key on Keyboard and click on "D."
33. With this Duplicate go to Layers>Merge>Visible.
34. Move this to the side make sure you add your other levels on top of this one.
35. Open Example 2.jpg this will help guide you. Move the feather into place and erase that part of the letter "U" make sure when you erase that you are on the Layer named TEXT.
36. Repeat Steps 32 and 33 and put this on top of the last one you just merged.
37. You will move the feather along the letters as if you were writing it. Repeating Steps 32 through 34. Till you have all the letters removed from the working image. You will be able to follow along by looking at the finished tag on top of this tutorial.
38. Make sure you keep putting your merged images on top of each other when merged. You will see later why we are doing this.
39. Move the working image to the side. Click on the last duplicate you merged. Look at Example 3.jpg.
40. Go to File>Save As>V2.psp.
41. Minimize this image. Click on the next image and repeat step 40 changing the numbers as you go along. I finished having V23.psp to this point. You may have more or less than I do and that is fine as long as you erased letter by letter.
42. Go back to the working image now I did this the hard way and I know there is a lot easier ways. But, I went to Edit>Undo History and I selected all the way back to where the text was completely on the working image. Please do this.
43. Go to the Layer Palette and delete the layers that has the feather and the ink well that separate. Click on the Layer 6 where the Red X is so you get back just the ink well with the feather in it.
44. Go to Layers>Merge>Visible.
45. Go to File>Save As V__.psp mine is V23.psp.
46. Go to File>Jasc Products>Launch Animation Workshop.
ANIMATION
1. Go to File>Animation Wizard.
2. Pop up one Same Size as First one is the only one checked click next.
3. Upper left hand corner and with canvas color checked click next.
4. Yes, repeat animation indefinitely and type in 50 in the box click next.
5. Click on the box Add Image add all your images making sure you have starting with V1.psp and ending with your last V__.psp mine being V23.psp click next.
6. Click Finish on the last Pop Up Window.
7. Don't do anything yet. We need to resize your animation.
8. Go to Animation>Resize Animation. Make sure in pop up the pixel size is checked and make sure no number is larger than 300x300. Aspect ratio at the bottom of the screen should have check mark click ok.
9. Go to View>Animation. I wanted my last frame not to move as fast as the others so go to your last frame click on the frame. Right Click and go to Frame Properties. When the pop up appears type in 100 click ok. This will make the last frame last a little longer before starting over at Frame 1 again.
10. We are going to save this now and I did mine a little different. When I put animation images in email with drop shadow I get dark edges around my image. So how I decided to fix it was in saving the image. I want most of my animations on a white background. If I want any other background I add it when you are setting up your animation wizard. Ok on with saving this image.
11. Go to File>Save As name your animation and make sure you are saving it as a gif file.
12. In the first pop up window click on the word customize.
13. In the next pop up window click on tab Partial Transparency.
Look in the middle it asks Would you like to blend the paritally transparent pixels. Yes will be checked see the color box? Click on it and change your color to white. Now you can only use this on a white background or it will show up the edges we are putting on it at this point so the drop shadows look nice. Click apply or ok you will then finish on through the saving of your animation as normal. You will get a white edge around your animation this is my choice to do this so I won't get dark edges.
click on the link below to Email me