HP at Impeller Shaft | 175 |
Normal Operating RPM. | 500-5500 |
Weight | 305 lb |
Engine Type | V-6 (60 degree VEE) |
Displacement | 2.5L (153 cu in) |
Bore & Stroke | 3.5" x 2.65" |
Induction System | Loop Charge ( 3 x 2v Carburetors) |
Cooling System | Water Cooled (Self Draining) |
Starter | 12 Volt Electric |
Alternator | 12 Amp Fully Regulated |
Ignition System | Thunderbolt Capacitor Discharge |
Fuel Requirements | 87 Minimum Octane |
OIl Injection System | Gear Driven, Variable Ratio, 3 Gallon Remote Reserve |
Turn Key Starting | Electronic Automatic Enrichment System |
Engine Protection System | Over-Speed, Overheat Warning, Low Oil Level, Oil Pump Rotational Sensor |
Pump Type | Mixed Flow Gear Driven |
Impeller Diameter | 7.25" |
Impeller Type | 3 Blade Stainless Steel |
Gear Ratio | 1:25 to 1 |
Reverse | High Thrust Twin Aperture Diverter |
Exhaust | Dual Outlet Below Water |
Engine Flush Attatchment. | Standard Equipment |