Ric Moore-"I don't know if there is a heaven. But if there is, Greg is up there, on pole."
1991 Honda Civic Zc and Import Page
If anyone has added Nitrous to a stock or modified ZC could they please E-mail me as to what kit they used and what jetting they are using (ie 55 hp, 65 hp, or whatever). Any information would be very helpfull. YOURCARS@HOTMAIL.COM
Some parts I need to sell
I GOT THE NOS, but??
My Car Pics
Go to the pic page
Manufacturers Links (alot of them!!)
News on ZC performance parts
Doing a header install?, Read this first!!
Zc
Specs
Taken from a ZC brochure. That's a ZC engine cut away.
ZC Part Interchange numbers
Timing Belt 88 Honda Prelude p/n - 14400-PK2-004
Distributor cap 88 Acura Interga p/n - 30102-PM7-305
Rotor 88 Acura Integra p/n - 30103-PM5-A05
Head Gasket 88 Honda Prelude p/n 12251-PM7-003
Intake Gasket 88 Acura Integra p/n 17105-PG6-S00
Exhaust Gasket 88 Acura Integra p/n 18110-PG6-003
Water Pump 90 Honda CRX p/n 19200-P01-004
Oil Filter 88 Acura Integra p/n 15400-PR3-004
Clutch Parts 90 Honda CRX
ZC Clutch disk use: 89 Honda Civic DX p/n - 22200-PM7-J02
ZC Pressure plate use: 89 Honda Civic DX
The 89 DX and the 89,90,91 CRX use the same size shaft and same
number of splines
on the transmission. The 89 DX clutch disk and pressure plate is
smaller in
diameter by about one inch than the CRX Si. Although the flywheel
is the
same diameter on both. As long as you stay with one or the other
it should
work fine.
Technical
Data:
1.6L (1590 cc) DOHC
130-135 hp @ 6800 rpm
Bore 75.0
Stroke 90.0
C.R. 9.5:1 I can find no evidence of it being any higher than
this.
91 octane. Some have reported no problems with 87, but the
specified
gas is equal to 91-92 'pump octane' available
in the US or Canada, although I use 94 octane
Identification:
Versions of the ZC
There are three versions of the ZC that I am aware of, but
there could be more
D16A8 Euro. spec featuring EFI
D16A9 Euro. spec featuring Carbs
ZC Jap. spec featuring EFI
The ZC comes with a black valve cover with the cover bolts on the
sides
The Honda symbol is on the exhaust side of the valve cover
The ZC comes with a 4-2-1 header style exhaust manifold
The ZC comes with a small oil to water oil cooler on the back of
the block
The ZC has the same mounting points as the standard 88-91
CRX/CIVIC
Maintenance:
Spark plugs: NGK BCPR6E-11
Timing belt: Part no. 14400-PK2-004 (same as 88 Prelude)
Oil filter: Same as 88-89 Integra. Fram part no. PH3539A
Oil pan gasket: Same as 88-91 CRX/CIVIC or 86-89 Integra
Spark plug wires: Same as 86-89 Integra
Distributor cap and rotor: you can use the 88-91 CRX/CIVIC SI or
88-89 Integra
Factory
Original
A car with an original factory equipped 1988 ZC Civic hatch Si with the bulge in the hood.
engine zc 1590cc
idle 730rpm manual
700rpm auto
static timing 16 deg BTDC manual and auto
compression measure at 250rpm and wot----nominal 192psi(1,324kPa,
13.5kgcm2)
minimum
135psi(932kPa, 9.5kgcm2)
maximum variation
28psi(196kPa, 2kgcm2)
cylinder head warpage limit 0.05mm(0.002")
height 131.95-132.05mm
valve clearances inlet 0.13-0.17mm(0.005"-0.007")
exhaust 0.15-0.19mm(0.006"-0.008")
stem to guide clearance in 0.02-0.05mm(0.001"-0.002")
limit
0.08mm(0.003")
ex 0.05-0.08mm(0.002"-0.003") limit
0.12mm(0.005")
valve seat width ex&in 1.25mm-1.55mm(0.049"-0.061")
limit 2.0mm(0.08")
fuel - 96+ octane unleaded
See the pic page for a bigger pic of the FLYING TURTLE!!!
HYBRID The Honda Hybrid On-line Resource
Download test