1 3/8 FITTINGS FOR HIGH PEAK SHADE KING ® CANOPIES
13/8 FITTINGS FOR SHADE KING ® CANOPIES SHADE KING ® CANOPIES
.
SHADE CANOPIES FROM SHADE KING ® SHADE CANOPIES
REPLACEMENT TARPS FOR SHADE KING TM. CANOPIES, SHADE KING ® CANOPIES.
REPLACEMENT 120 DEGREE FITTINGS FOR SHADE KING CANOPIES, SHADE KING ® CANOPIES.
sold as SHADE KING TM.(Shade canopies)by others.
120 DEGREE HIGH PEAK FITTINGS
CLICK ON ANY PICTURE BELOW TO ENLARGE
....
....
....
....
HIPW-1----------HIPW-1---------HIPW-2---------HIPW-2
HIGH PEAK CANOPY FITTINGS FOR ONE INCH EMT.
$11.00..;.....$12.00
120 DEGREE HIGH PEAK FITTINGS FOR 3/4 INCH EMT CONDUIT.
CP11-HI AND CP12-HI HAVE CENTER LEGS DOWN.
...
...
...
CLICK ON PICTURE TO ENLARGE
120 DEGREE HIGH PEAK FITTINGS FOR 3/4 INCH EMT CONDUIT.
Your canopy will have eight (8) legs four on each side for a 10X20 canopy or (10) legs for a 10X24 canopy.
TARPS FOR 10X20 and 10X24
120 DEGREE HIGH PEAK SHADE CANOPIES
These are 12X20 tarps they are for the HIGH peak 120 DEGREE 10X20 canopies bought BY others. UNDER THE SHADE KING TM. CANOPIES
TARPS FOR A 10X10 HIGH PEAK CANOPY
========================================================================
VALANCE WHITE, SILVER AND CLEAR TARPS
WHITE & SILVER PEAK ENDS FOR 10X20 120 DEGREE HIGH PEAK CANOPIES WITH OUT DOOR
PEAK END TARPS FOR HIGH PEAK ROOF CANOPIES w/ ZIPPER DOOR.
WITH 6'6" LEG OUT SIDE CANOPY LEGS
WHITE, SILVER, CLEAR TRAPS WITH ZIPPER DOOR.
MEASURE INSIDE TO THE INSIDE OF THE CANOPY LEGS
Bottom 10'5" Center 9'4" Side 6"4"
HIGH PEAK END FOR 12 FOOT HIGH PEAK CANOPIES
WITH ZIPPER DOOR AND WITH OUT DOOR
HIGH PEAK ENDS FOR A 20X20 HIGH PEAK CANOPY
Bottom 17'4" Center 11'4" Side 6"4"
WHITE SIDE WALLS FOR 10X20 CANOPIES
FIRST QUALITY 4MM BALL BUNGEES FOR THE TARPS.
CANOPY FITTINGS FOR HIGH PEAK CANOPIES
ACCESSORY SHADE CANOPY FITTINGS
FOR 1 & 3/8 INCH OD STEEL TUBING
LIFE TIME WARRANTEE on all canopy fittings against breaking.
All fittings at the top of this page are for 1&3/8 OD TOP RAIL FENCE tubing.
The fittings on the left of this photo are for 1 in. ID CONDUIT.
The fittings on the right of this photo are for 1&3/8 OD tubing.
METAL CONDUIT IS MEASURED BY THE ID. ( INSIDE DIAMETER.)
METAL TUBING IS MEASURED BY THE OD, (OUT SIDE DIAMETER.)
CCP-1 IS A LOW PEAK FITTING. FOR 1 IN ID CONDUIT.
CCP-1 IS A 102 DEGREE FITTING
CCPM-1 IS A MEDIUM PEAK FITTING. FOR 1 IN ID CONDUIT.
CCPM-1 IS A 110 DEGREE FITTING
CCP-25HI IS A HIGH PEAK FITTING. FOR I IN ID CONDUIT.
CCP-25HI IS A 120 DEGREE FITTING
P-1 HI 1&3/8 IS A HIGH PEAK FITTING FOR 1&3/8 OD TUBING.
P-1 HI 1&3/8 FITTING IS A 120 DEGREE FITTING
1&3/8 MP-1 IS A MEDIUM PEAK FITTING FOR 1&3/8 OD TUBING.
1&3/8 MP-1 IS A 110 DEGREE FITTING
WITH A 102 DEGREE FITTING A 10X20 CANOPY SHADE COVERS 10X20
WITH A 110 DEGREE FITTING YOU LOOSE A BOUT 6 INCHES OF SHADE
WITH A 120 DEGREE FITTING YOU LOOSE ABOUT TWO FEET OF SHADE UNLESS
YOU MAKE THE FRAME TO FIT A 12X20 TARP. THEN YOU WILL HAVE ABOUT 20 FEET OF SHADE.
PAGE 2 1&3/8 FITTINGS
GO CANOPY OTHER SETS OF PARTS
PITCHED ROOF CANOPY KIT PRICES
GO WHITE & SILVER TARPS
DECK CANOPIES LEAN-TO CANOPIES
CALL FOR OUR 8 1/2X11 26 PAGE CATALOG ABOUT CANOPIES AT 800-323-3209
OR E-MAIL US FOR ONE. E-MAIL CHECKED 3 TIMES A DAY.
SHADE KING ®
4517 N. FM 486
Thorndale, TEXAS 76577
512-862-3035
OUR CANOPIES TOPS ARE WATER PROOF.
catalog copy rights 1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1983,1984,1985,
1986,1987,1988,1989,1990,1991,1992,1993,1994,1995,1996,1997.1998,1999,2000,2001,2006
Prices can change without notice.
Shade King ®
Shade Canopies, shade canopy, shade, canopy,canopy tarps, shade canopies,canopies, shade
Shade King Shade Canopies, shade canopy,
shade,canopy tarps, shade canopies, canopies, shade
-------------
Email: shadeking@airmail.net