| |
DEPRESSED CENTER WHEELS
High speed depressed center wheels are resin bonded
abrasive tool with special fabric reinforcement
mesh bearing high tensile strength, shocking and bending. By using with peripheral velocities up to 80m/s meet high
grinding efficiency and great safety in production. To raise the
strength, the wheels are reinforced with mesh
fabric cloth, and the wheel bores are additionally inlaid with
metal rings, The layer number of the said mesh cloth depends on
the thickness of wheels are shown
below:
D × H × d |
MAX. SPEED |
Outer packing |
Volume (cm) |
INCHES |
mm |
SINGLE NET |
DOUBLE
NETS |
kg/pcs/ctn |
L × W × H |
3800m/min |
4300m/min |
4800m/min |
4×1/8×5/8 |
100×3×16 |
12100R.P.M. |
13700R.P.M. |
15200R.P.M. |
22/400/1 |
47×22×22 |
4×5/32×5/8 |
100×4×16 |
22/300/1 |
31×22×32 |
4×1/4×5/8 |
100×6×16 |
21/200/1 |
40×222×2 |
4(1/2)×1/8×7/8 |
115×3×22.23 |
10500R.P.M. |
11900R.P.M. |
13300R.P.M. |
15/200/1 |
47×27×13.5 |
4(1/2)×1/4×7/8 |
115×6×22.23 |
14/100/1 |
37×24×13.5 |
5×1/8×7/8 |
125×3×22.23 |
9700R.P.M. |
11000R.P.M. |
12200R.P.M. |
9/100/1 |
27×26×14.5 |
5×5/32×7/8 |
125×4×22.23 |
14/100/1 |
32×26×14.5 |
5×1/4×7/8 |
125×6×22.23 |
17/100/1 |
43×27×14.5 |
6×1/8×7/8 |
150×3×22.23 |
8100R.P.M. |
9100R.P.M. |
10200R.P.M. |
13/100/1 |
34×27.5×16.5 |
6×1/4×7/8 |
150×6×22.23 |
26/100/1 |
41×32×16.5 |
7×1/8×7/8 |
180×3×22.23 |
6700R.P.M. |
7600R.P.M. |
8500R.P.M. |
17/100/1 |
37×27×20 |
7×5/32×7/8 |
180×4×22.23 |
26/100/1 |
37×32×20 |
7×1/4×7/8 |
180×6×22.23 |
32/100/1 |
41×38×20 |
7×5/16×7/8 |
180×8×22.23 |
23/100/1 |
37×22×20 |
9×1/4×7/8 |
230×6×22.23 |
5260R.P.M. |
5950R.P.M. |
6650R.P.M. |
30/50/1 |
41×24×25 |
|