SELECT DEPARTMENT AND CLICK SHOP NOW
...
...
ROGER BEEP BOARDS - $35.00 INSTALLED ( REGULAR STOCK )
* PRICES ARE BASED ON OPTIONS / FEATURES YOU CHOOSE
* EXTRA (EXPO) CHANNEL SWITCH BOX
Master Mod Upgrade Package For Cobra 29 & Uniden 76/78 Units ONLY
package to update an old radio or give a fresh start to the new one.
Master Mod Upgrade Kit Contains 1 each of the following:
1 - DM Variable Power Modulator Swing Kit
The DM Master Mod Upgrade Kit (NOTE: please state color choice for LEDs at time of order on Pay Pal invoice)
IMPORTANT NOTE:
UNIDEN GRANT XL UNITS ONLY Extended Frequency "Extra Channels" Kit
$25.00 EACH
Extended Frequency "Extra Channels" Kit
This kit is also designed to add the "extra channels" to your Galaxy DX2517 & Galaxy DX2547 base units. Kit comes with easy to follow text instructions, color coded wiring picture diagram.
$25.00 EACH
10Kc Switch Kit
THIS KIT ALLOWS FOR A -10K AND +10K OPTION PER CHANNEL
The 919 to 979 and 2547 units have always been capable of this feature, but, it is not a factory standard option,
but, this kit will restore that lost function. This kit is designed for the Galaxy dx919 to dx2547 units.
Kit comes with complete procedure and component installation instructions. I also supply the single, drop-in, component required for the modification. Simply install the switch module, supplied component, and solder three wire wires at proper installation points and you now have the ability to "slide" 10K between channels.
$8.50 EACH
10Kc Switch Mod Kit
THIS KIT ALLOWS FOR A -10K AND +10K OPTION PER CHANNEL
The Galaxy DX33 and Connex 3300 units are capable of this feature, but, it is not a factory standard option,
but, this kit will restore that lost function. This kit is designed for the Galaxy DX33 / Connex 3300 only.
Kit comes with complete procedure and component installation instructions. I also supply the single, drop-in, component required for the modification. Simply install the switch module, supplied component, and solder three wire wires at proper installation points and you now have the ability to "slide" 10K between channels.
$8.50 EACH
DUAL SPEED AMPLIFIER
* TRANSISTORIZED CIRCUITRY
THIS UPGRADE CONTROLLER IS DESIGNED TO GIVE YOUR HIGH SPEED COOLING FAN(S) TWO RUNNING POSITIONS WHILE POWER IS SUPPLIED TO YOUR RADIO AND/ OR AMPLIFIER. THE PURPOSE OF THIS KIT IS TO ALLOW YOU A CONSTANT HIGH-SPEED COOLING SPEED OPTION FOR TIMES WHEN YOU ARE DOING A LOT OF TALKING AND NEED THE ADDITIONAL HIGH FAN SPEED TO KEEP YOUR UNIT COOL.
THE LOW-SPEED FEATURE IS DESIGNED TO GIVE YOU A CONSTANT LOWER FAN SPEED (1/2 SPEED) WHEN NOT TALKING AS MUCH AND IT DECREASES THE “NOISE” GENERATED BY FANS AT HIGH SPEEDS, WHILE STILL OFFERING ENOUGH FAN SPEED TO EXHAUST IDLE HEAT FROM THE UNIT. THIS CONTROL MODULE ALSO ALLOWS FOR A COMPLETE “OFF” POSITION WHEN YOU WANT TO KEEP THE POWER ON, BUT, DO NOT NEED THE FAN TO RUN AT ALL.
THIS FAN SPEED CONTROL INCORPORATES A TRANSISTORIZED CIRCUIT, SO, SPECIAL ATTENTION NEEDS TO BE OBSERVED WHEN WIRING THE CONTROL MODULE IN LINE WITH YOUR FANS POSITIVE 12-VOLT POWER WIRE. THIS CONTROL MODULE IS POLARIZED. IT WILL ONLY WORK WHEN PROPERLY WIRED. COMPLETE INSTALLATION INSTRUCTIONS ARE INCLUDED IN THE KIT.
SELECT DEPARTMENT AND CLICK SHOP NOW
When you are done shopping, click on the
|