Recognized HTML document

Figure	39
7. Replace seat back panel and metal screws	1.
and replace seat assembly in car and tighten
securely.	Z.
8. Replace side panels and seat adjuster knob,
Approximate Flat Rate Time 1,5 hours,
ALL TWO-DOOR FRONT SEATS	3.

Remove seat adjuster knob and side panels
from seat assembly.

Remove four cap screws from each side of
seat assembly which holds seat to floor pan
of body and remove seat assembly from car.
Remove two sheet metal screws located at

Two-Door Sedans, Bel Airs and Convertibles bottom rear edge of back rest and hairpin

(Fiber - Plastic - Rayon) clip from back rest shaft on outside end of

Figure 40