Recognized HTML document

in bumper face bar on the opposite side of
the vehicle.

3. Relocate paper template on this side o€ ve
hicle and drill the required hole in the gravel
deflector and bumper brace.

4. Attach braces to grille guard using bolts,
nuts and lock washers provided. Assemble
grille guard to top flange of face bar using
large flat washers as spacers between guard
and bar and secure with bolts, nuts and lock
washers provided, as shown in figure 65.

5. Insert spacer between gravel deflector and
bumper brace and secure grille guard brace
at rear with long bolts provided.

Approximate Flat Rate Time I hour.

Figure 64

1. Using template provided in package, locate
and drill one hole in top flange of bumper
face bar and one hole in gravel deflector
and bumper brace for model designated.

2_ Remove paper template and using grille
guard as template locate and drill the hole

986496 GUARD - FRONT AND REAR

Procedure for Installation o€ Front and Rear

Fender Guards
on All Model Passenger Cars.

Figure 65