| Previous | Toc | Next |
The
windshield wiper control is your windshield
washer control. Push button and release to op
erate washer. Turn knob to operate wipers.
Care and Operation
The
windshield washer is operated by surplus
vacuum from the engine. For best results re
move foot from accelerator pedal while the
value is turned on.
CAUTION:
Great care should be taken to avoid
filling the pin hole opening in the jet, partic
ularly with wax in polishing of cars. Keep pin
hole opening clean. Do not use other cleaning
solutions or chemicals as they may damage car
finish or washer parts. If nozzles do not eject
a full stream of liquid or if both nozzles are
not equalized, relieve hoses of all restrictions.
To clean jets take out screw at end of jet and
poke wire through pin head opening while wash
er is flushing. Insert screw and tighten secure
ly after cleaning process is completed.
Winter Use
The
use of the washer in freezing temperature
is not recommended. The system should be
drained but
if for any reason winter use should
be required, a special harmless all season sol
vent can be secured from any authorized Gen
eral
Motors Dealer at a nominal price with
complete instructions on the bottle regarding
its usage.
Approximate Flat Rate Time .9 of an hour.
986527
WINDSHIELD WASHER - FOOT
OPERATED
Procedure
for
Installation of
Windshield
Washer
on
All Model Trucks.
Figure 229
1.
Locate and drill all holes as shown in fig
ure 228. Then install windshield washer
Figure 228
| Previous | Toc | Next |
