 I used tapes to protect the injectors |
 Intake runner installed before put in rail |
 I removed injectors to change grommets and O-rings |
 Another close up of the rail |
 Presto! Rail installed! |
 This was taken at night! |
 That's It Im off to bed! |
 The next morning! :) |
 Putting on clamp on Oil vent hose |
 Finishing up the job |
 tugging the hose into the tube |
 Screwing on the clamp |
 There! tube installed! |
 Now I can finish up connecting the harness and intake manifold |
