Lewis Boat Works: Custom Boat building and Plans
Construction of a ScoutCanu Underway !!!
Please read this Disclaimer before building any plans found on this site:
My son wanted a canoe to fish a little waterhole that he found, so we decided to build a ScoutCanu.
8.28.2002
We put the decks on but I didn't get a pic with the boat upright, and the Gravity Clamps were in place so Bub lifted the end and I shot this from underneith. I layed the ply over the boat and traced the shape, cut it and glued and screwed it. This is the fore end with a 2 ft deck and the stern has an 18" deck.
A shot of the cavity. We still haven't sealed the inside, and probably should have got the bottom side of the deck before installing, but we were in a hurry. I will put a sealer coat in at a later time. I am debating putting in bulkheads to seal the ends. The boat is still less than perfectly stiff, as it can twist a little and I think the bulkheads will be the key.
Plans Available Below:
Original CubCanu: Mk11, ScoutCanu, ScoutYak:
Usefull info on wood and epoxy building:
or
