| West Coast Colors Dungeon Designer |
I started with a 1x1¼" piece of 1/8" plywood (for model airplanes) and glued coffee stir stix cut to length.
The legs are stir stix cut on an angle and glued to a short piece of 1/8" square basswood scale lumber. Once each leg
piece was dry, I turned the table top upsidedown and glued them on.
Here's a simple worktable, in this case for painting
the shields made in the Ghost Anvil forge.
The barrels on the left are from Ainsty (UK) and on the right, from a miniature show years ago. The front one has been drilled out and filled with resin.
