Site hosted by Angelfire.com: Build your free website today!
undefined
undefined
For the longest time, markers only used CO2.  Today many markers either can only use CO2 or prefer CO2.  The CO2 is in a gaseous form inside the tank which is at about 875 psi at 70 Fahrenheit and low humidity.  In cold weather, the psi decreases, and in warmer increases.  Some examples of markers that use only CO2 or prefer CO2 includes most mid to low range semi-autos (Spyders, Tippmanns, Sheridans), all pumps, Shockers, and Brass Eagle Rainmaker (loves CO2.) Below are the sizes of CO2 tanks on the market today. Hydro-Testing.  This should be done on all CO2 tanks measuring over 5in in diameter, in short, anything above the 16 oz.  
12oz_alum.jpg (26531 bytes) 12 oz  16oz_tank.jpg (25698 bytes) 16 Stubby oz
14oz_tank.jpg (21026 bytes) 14 oz 20oz_tank.jpg (32013 bytes) 20 oz
20oz_w_on_off.jpg (21582 bytes) 20 oz 24oz_tank.jpg (25004 bytes) 24 oz
bulldog_20oz.jpg (11230 bytes) Bulldog 20 oz.  ACI Bulldogs are some of the best tanks on the market.    
HPA or C/a is sweeping the paintball nation.  Now a days, one sees HPA like they did back ten years ago with CO2.  HPA provides a more consistent pressure, and will not be affected by the weather.  For HPA, there are two different psi, 3000 and 4500.  Pay attention to what you are using since some regulators and remotes can only handle lower pressures of 2500psi.   Hydro-testing of the HPA tanks MUST be done every 3 years if it is fiber, or every 4 years if it is Aluminum.  
aci_alum_47_turbo_max.jpg (18252 bytes) Turbo Max 47cu 3000 psi agd_flatline_tank.jpg (48077 bytes) AGD Flatline, it is important that you pay attention and read directions on what you can use.  The AGD Flatline is not a mere bottle, but it is the regulator hooked up to the bottle.  There are two different regulators, a 68 cubic inch and a 47 cubic inch.  DO NOT cross these, use a 68 cu with a 68 cu tank, and a 47cu with a 47 cu tank.  Pictured is the AGD Flatline 68cu 3000psi
airamerica_melee_47.jpg (23325 bytes) Air America Melee 47cu 3000psi airamerica_melee_68.jpg (24736 bytes) Air America Melee 68cu 3000psi
    BULLDOG regulators are available in a 3000psi preset and a 3000-psi adjustable regulator.  BULLDOG regulators are made in the USA, with the highest  quality stainless steel and aluminum, and all BULLDOG regulators screw directly into a CA adapter.  NO MOUNTING SYSTEM REQUIRED!!!
     BULLDOG regulators are the only regulators on the market that have a downstream burst disk for extra player safety.  The BULLDOG preset and the adjustable regulators are available with 3000-spi 47 cu. aluminum tanks or fiber-wrapped tanks in 68 cu. or 110 cu.
   
Adjustable:     The BULLDOG adjustable regulator features a hard anodized aluminum body with stainless steel internals.  Fully adjustable from 0-900 psi, this regulator can be used on all paintball markers currently available on the market.  The BULLDOG adjustor is dual gauged for tank pressure and output pressure.    
bulldogtanks1.gif (14441 bytes) adjust 47 3000 bulldogtanks2.gif (17493 bytes) adjust 68 3000
Preset BULLDOG preset regulator is factory preset at 850-psi for players that want a compressed air system that screws directly into their marker, and not have to worry about pressure output.  NO ADJUSTMENTS NEEDED!!!    
bulldogtanks3.gif (13280 bytes) preset 47 3000 bulldogtanks4.gif (14233 bytes) preset 68 300