Cost: 80 bucks. The intake tube is made for a Honda Civic, but it also works on a dakota
Cost: Free if you have a dremel tool and about 4 hours to spare. Also will need a new TB gasket
Cost: Bought used for 100 bucks from a DMLer
Cost: 80 dollars for an electrical fan, and 15 for a thermostat relay
Cost: 70 bucks from Summit Racing, plus a 15 dollar belt from an autoparts store
Cost: 230 bucks, made by JBA
Cost: 100 bucks from a muffler shop
Cost: was done at a muffler shop in Louisianna for 60 bucks
Cost: Rollers were 160 bucks, and the Mopar/Chevy conversion kit from Crane Cams was 80.
Close up of the JBA headers.
