Owner: Comptech USA
Location: El Dorado Hills, CA
Manufacturer: Honda
Make: S2000
Year: 2000
Engine & Drivetrain Components:
Comptech Supercharger: Uses Paxton Novi 1000 centrifugal charger, Comptech fuel pressure regulator, Comptech mounting brackets, a Comptech High pressure fuel pump and a Comptech High Flow Air box with a Comptech foam air filter. The kit makes approximately 6 psi. of boost and fuel pressure is increased as boost is increased for the proper air to fuel mixtures. The car makes approximately 100 more hp. and 60 ft lbs. more torque at the rear wheels than stock. The kits carb. EO# is D-455-10.
Comptech Exhaust: Cat-Back Exhaust system utilizing Stainless steel T304 mandrel bent tubing with T304 stainless steel mufflers.
Comptech / ACT Clutch: Uses Advanced Clutch Technology Heavy duty Pressure Plate, Stock Honda Clutch Disc, and a Comptech lightened flywheel.
Comptech/Kaaz USA Rear End: Kaas USA Limited slip differential and Comptech Billet Steel Differential main caps.
Chassis Components:
Comptech Adjustable Springs: The height is adjustable using a threaded collar under the spring and is lockable. The corner weights and ride height can be fine tuned.
Comptech Sway bars: Front sway bar is tubular and is 28% stiffer at the wheel. The rear sway bar is tubular and is 22% stiffer at the wheel.
Comptech Front Upper Strut Brace: This adds strength to upper part of the front suspension.
Comptech Front lower Suspension Brace: This replaces the stock tubular unit with billet alum. unit that is lighter and stronger.
Comptech Rear lower Suspension Brace: Replaces the stock stamped steal unit with a stronger billet alum. part.
Comptech / Brembo Front Brakes: 13” Cross-drilled directional veined rotors w/ Four piston DOT approved cast calipers.
Comptech Rear Brakes: 12 ¾” slotted rear rotors using the stock rear calipers w/ billet mounting brackets and Comptech pads.
Comptech Stainless Steel Braided Brake Lines
OZ Racing custom Mito Modular (3 Piece) wheels, Front's 18x8 w/52mm offset. Rears, 18x9 w/65mm offset. In the works are some OZ racing One Piece wheels
BFGoodrich G-Force T/A KD tires. Fronts 225/40ZR18 and rears are 265/35ZR18.
Interior Components:
Auto Meter Gauges. Carbon Fiber Boost and Fuel Gauges using a prototype Gauge Pod.
Sparco USA Sport Seats and brackets.
Sparco USA Harnesses.
Comptech Carbon Fiber Dash Kit.
Body Components:
Honda Front Under spoiler
Comptech Side skirt kit
Honda Trunk Spoiler
Honda Black Chrome emblems
Sponsors:
Advanced Clutch Technology
Auto Meter Products
BFGoodrich Tires
KAAZ USA
OZ Racing Wheels
Sparco USA
Comptech USA
4717 Golden Foothill Pkwy.
El Dorado Hills, CA. 95762
(916) 933-1080
