Robotics
EEPROM Programming with display
up a level
Enter the program "2.5 EEPROM programming".
Come up with your own design to program.
Draw the design on a large piece of paper.
Program the BoeBot to make the movements of the drawing.
Attach a pen to the BoeBot using springs.
Leave the pen attached for the duration of the period. Cover the pen when it is not drawing.
Fine tune the program so that it is more accurate to your intended drawing.
Change the number of commands, change the number of pulses.
Make new commands that meet your needs.
Photograph your Bot drawing the design.
Photograph your original drawing.
Photograph the final drawing.
Modifications you needed to make to the construction.
Write about what you did in this project.
Write about how you did this project.
Write about what you learned in this programming project.
Make a display of the physical items listed above.
Label the location of each of the command changes on the drawing.
Use gluestick and scissors to make a posterboard of the robot drawing and the other items.
You may need a second piece of paper, but try to do it with one.
Paste the photos, programming code and your text onto the paper.
There should be no flappy edges.
The text should have headings that are larger than the paragraphs below them.
The text should not be overly large. Viewing will be from about 1-3 feet.
The display should appear neat and publicly presentable.
