Contact Information
Tel (410) 507-6824
E-Mail cash.tim@gmail.com
If I can be of assistance, please e-mail me and I will be happy to help!
Technical Skills
a.) Technical management for state-of-the-art aerospace and telecomm projects.
b.) National and International business development.
c.) Field research for bid and proposal development.
d.) Engineering, modeling and simulation support, and benchmarking of military
and commercial communications systems and remote weapons platforms.
e.) Design, Installation, Test and Cut-Over of Telecom Networks (SONET, ATM,
Frame Relay, analog and digital microwave radio, microwave and optical network
link analysis).
f.) Design of undersea cable, vehicle, and optical fiber systems.
g.) Design of embedded systems.
h.) Extreme Stress Screening and acceptance test of component and system
hardware for extreme environments.
i.) Design of test sets for copper and fiber optic media.
j.) Reverse engineering of electrical and optical fiber prototypes.
k.) Engineering support for following soft tools: MATLAB, MATHCAD, ORCAD,
COSMOS, AUTOCAD, NASTRAN, LABVIEW, PSPICE, DSP, FORTRAN, and BASIC.
l.) Craft technical documents and specifications.
I have worked with hardware that withstood the extreme depth of the ocean, to the hard vacuum and radiation environment of outer space, to the battle fields of Iraq, and everything in between! I engineer system solutions for the aerospace and commercial marketplace so you don’t have to!
Portfolio of Timothy J Cash:
If you wish to view the Fiber Optic Transmitter Circuit I reverse engineered for Western Instruments for deep ocean operation on the Oceaneering job for Shell Oil, please Click Here.
If you wish to view a cross-section of the Electro-Optical Umbilical Cable I engineered for Western Instruments for the Hydra-2500 ROV on the Discoverer Seven Seas drill ship, please Click Here.
If you wish to view the drill ship Discoverer Seven Seas where I installed the Electro-Optical Umbilical and Neutral Buoyant Tether Cables and optical fiber video system for the deep ocean Hydra-2500 ROV, please Click Here.
If you wish to view a cross-section of a typical Mach-Zehnder Optical Fiber Interferometric Hydrophone constructed at Litton Guidance and Controls Fiber Optics Laboratory, Chatsworth, CA, please Click Here.
If you wish to view the Mass Mounted Sight Helicopter Night Vision System I tested for McDonnell Douglas, Huntington Beach, CA, please Click Here.
If you wish to view a cross-section of a 144 count Single Mode Optical Fiber Cable I installed for the Boeing Delta-4 EELV SLC-37 Launch pad, please Click Here.
If you wish to view my Heliac Ramjet Gas Mixer design for Megabase Research Products, Lincoln, NE for their Pressurized Gas DNA Thermocycler, please Click Here.
If you wish to view the $498 Million Tactical Automated Security System (TASS) I installed in Iraq for Honeywell TSI to monitor base perimeters, please Click Here.
If you wish to view the Advanced SEAL Delivery System (ASDS) dry mini-submarine that I performed val/ver on the cable/connector pinouts at Northrop Grumman, Annapolis, MD, please Click Here.
If you wish to view my STS-1 Space Shuttle Flight Achievement Award, please Click Here.
If you wish to view my Certificate of Completion for Hands On Data Communications, please Click Here.
If you wish to view my Certificate of Completion for Satellite Tool Kit, please Click Here.
If you wish to view my Certificate of Appreciation Award from the 506th Expeditionary Security Forces Squadron-Kirkuk AB, Iraq during OPERATION IRAQI FREEDOM, please Click Here.
If you wish to view my Appreciation Award from IEEE for Chairing the Melbourne Section Consultant's Network Affinity Group, please Click Here.
If you wish to view the above system photos from my career work in a photo gallery, please Click Here.
Go to Page 1.
