CITICORP(CITIL)
********
Source:REC CALICUT.
SECTION-1
*********
1) For the first qustion in the paper answer is (30).
2)Five trays cost is 0.35 each and dozen----- (ans:Rs13.75)
3)In a journey of 15 miles two third distance was travelled
with 40 mph and remaining with 60 mph.How muvh time the
journey takes...(ans:20 min)
4)A man walks from 9.15 to 5.15 from monday to friday and 9.00
to 12.00 on saturday.Each day 0.45 min lunch.
How much time he walks in a week...(ans: 39hrs15min).
5) 12 revolutions takes 1/8 th second time.In 20 seconds how
many revolutions...(ans:1920)
6) In 60 reems of paper 40 reems were utilised then what
percent will remain...(ans:33.33%)
7) A started at 9.00 am with 6 mph and B started at 9.30 am
with 8mph in the same direction. At what time they will meet...
(ans:11.00am)
8) In a storage stall of 5x3x2inch.How many blanks of size
2x1x1inch can be stored..(ans:15)
9) In a company 3/5 of people know shorthand 1/4th know typing
and 1/5 know both. What fraction of people do not know both..
(ans:35%)
10) A man how many bikes of Rs 14000 can buy by selling 2100
bikes of Rs500/- of each (ans: 75)
11) A company requires 11,500 strength.present employees are 200
women , men and 6500 unmarried To reach the target how many
women required to maintain the same ratio (ans : 300)
12) What is the time required to punch 1500 cards of 50 column
each at the rate of 10,000 punches per hour (ans:7hr 30min)
This section includes 10 data interpretation questions.For
this you follow the GRE book.In these questions some graphs will
be there and the related questions will be asked...so you
prepare from gre book.
Some qustions are difficult.SO you first do the above qustions
and go to data interpretation.
In the above given paper the meaning of the qustions may be wrong,
but the answers and the numericals in the question are exactly
correct. so it would be better to remember the answres.
thta'S all about this section.
NUMBER SERIES: 20 QUESTIONS 7 MINUTES
*************
These are very easy. Questions are not availeble.
FIGURE SERIES: 20 questions 14 minutes
*************
THESE ARE ALSO VERY EASY.DON'T WORRY ABOUT THIS SECTION
ANALYTICAL REASONING:
********************
1) In a group of five persons A,B,C,D,and E
a)A and C are intelligent in English and Reasoning.
b)B and C are intelligent in English and General Awareness.
c)E and D are intelligent in Arithmatic and Inteview.
d)E is intelligent in Interview,reasoning and Arithe matic.
e)B and D are intelligent in Arithematic and General Awareness.
1) Who is intelligent in English,arithematic,and general
awareness (ANSWER:B)
2)Who is intelligent in english and reasoning but not in
general awareness (ans:A)
3)Who is intelligent in Arithematic,General Awareness and
Interview (ans:D)
4)Who is intelligent in English General Awareness and Reasoning
(ans:C)
5)Who is intelligent in Arithematic,Reasoning and Interview(ans:E)
2) Five persons A,B,C,D and E were travelling in a car.They were
two ladies in the group. Of them who knew the car driving one
was a lady.A is brother of D.B wifeof D,drve at the begining.
E drive at the end.
1)Which of the following is a pair of brothers.(ans:A,D)
2)Who was the other lady in the group.(ans:C)
3)In the case of which the following pairs,no relationship
can be established with one else in the group (ans:C,E)
4)How was E related to A.(ans:DATA INADEQUATE)
3) A man said to woman " your only brother's son is my wife's
brother". How is the woman related to the man's wife...(ans:AUNT)
IN THIS SECTION ALSO THERE ARE SOME MORE QUESTIONS.THESE ARE
NOT AVILEBLE.
This is also like tcs paper.for every section there will be a
limited time.you should complete only at that specified time.
They won't allow to go back in the middlE.
So please remember,time factor is the important thing.
ESSAY (10 MIN)
**************
In the last section there was passage.You should conclude that
one in the specified 10 min. It would be better to prepare a
computer related topics like client server,internet etc..
(HCL SOFTWARE PAPER)******************************
NOTE : Please check answers once again.
section 1.
1.which of the following involves context switch,
a) system call b)priviliged instruction
c)floating poitnt exception
d)all the above
e)none of the above
ans: a
2.In OSI, terminal emulation is done in
a)semion b)appl.. c)presenta... d)transport
ans: b
3....... 25MHz processor , what is the time taken by the
instruction which needs 3 clock cycles,
a)120 nano secs b)120 micro secs
c)75 nano secs d)75 micro secs
4. For 1 MBmemory no of address lines required,
a)11 b)16 c)22 d) 24
ans: 16
5. Semafore is used for
a) synchronization b0 dead-lock avoidence
c)box d) none
ans : a
6. class c: public A, public B
a) 2 member in class A,B shouldnot have same name
b) 2 member in class A,C " '' '' ''
c) both
d) none
ans : a
7. question related to java
8. OLE is used in
a)inter connection in unix
b)interconnection in WINDOWS
c)interconnection in WINDOWS NT
9.No given in HEX ---- write it in OCTAL
10.macros and function are related in what aspect?
a)recursion b)varying no of arguments
c)hypochecking d)type declaration
11.preproconia.. does not do one of the following
a)macro ...... b)conditional compliclation
c)in type checking d)including load file
ans: c
SECTION B
__________
1.enum day = { jan = 1 ,feb=4, april, may}
what is the value of may?
a)4 b)5 c)6 d)11
e)none of the above
2.main
{
int x,j,k;
j=k=6;x=2; ans x=1
x=j*k;
printf("%d", x);
3. fn f(x)
{ if(x<=0)
return; ans fn(5) ....?
else f(x-1)+x;
}
4. i=20,k=0;
for(j=1;j<i;j=1+4*(i/j))
{
k+=j<10?4:3;
}
printf("%d", k); ans k=4
5. int i =10
main()
{
int i =20,n;
for(n=0;n<=i;)
{
int i=10
i++;
}
printf("%d", i); ans i=20
6. int x=5;
y= x&y
( MULTIPLE CHOICE QS)
ans : c
7. Y=10;
if( Y++>9 && Y++!=10 && Y++>10)
printf("........ Y);
else printf("".... )
ans : 13
8. f=(x>y)?x:y
a) f points to max of x and y
b) f points to min of x and y
c)error
d) ........
ans : a
9. if x is even, then
(x%2)=0
x &1 !=1
x! ( some stuff is there)
a)only two are correct
b) three are correct
c), d) ....
ans : all are correct
10. which of the function operator cannot be over loaded
a) <= b)?: c)== d)*
ans: b and d
SECTION.C (PRG SKILLS)
--------
(1) STRUCT DOUBLELIST
{ DOUBLE CLINKED
INT DET; LIST VOID
STRUCT PREVIOUS; BE GIVEN AND A PROCEDURE TO DELETE
STRUCT NEW; AN ELEMENT WILL BE GIVEN
}
DELETE(STRUCT NODE)
{
NODE-PREV-NEXT NODE-NEXT;
NODE-NEXT-PREV NODE-PREV;
IF(NODE==HEAD)
NODE
}
IN WHAT CASE THE PREV WAS
(A) ALL CASES
(B) IT DOES NOT WORK FOR LAST ELEMENT
(C) IT DOES NOT WORK FOR-----
(2) SIMILAR TYPE QUESTION
ANS: ALL DON'T WORK FOR NON NULL VALUE
(3) VOID FUNCTION(INT KK)
{
KK+=20;
}
VOID FUNCTION (INT K)
INT MM,N=&M
KN = K
KN+-=10;
}
SECTION D
--------
(1) a=2,b=3,c=6 c/(a+b)-(a+b)/c=?
(2) no.rep in hexadecimal, write it in radiv 7
(3) A B C D E
* 4
---------- find E ANS: 13
E D C B A
------------
(4) GRE-MODEL TEST-1, SECTION-6(19-22)
(5) M HAS DOUBLE AMOUNT AS D, Y HAS RS. 3 MORE THAN HALF OF AMOUNT OF D
THE ORDERING A,B,C M C D C Y
ANS:DATA INSUFFICIENT D C M C Y
(6)IN STASTIC MEN CAUSE MORE ACCIDENTS THEN ONE CONCLUSION
(A) MEN DRIVE MORE THAN ONCE
(B) STASTICS GIVE WRONG INFORMATION
(C) WOMEN ARE CAUTION THAN ME ANS; C(VERIFY)
(D)-----ETC
(7) P,Q,R,S,T,U -SECURING GRANT;TWO TOURIST PARTIES AND THEN
TWO SECURITY GAURDS SHOULD GO WITH EACH PARTY
_________________________________________________________________
P AND R-ARE ENEMIES, Q DOES NOT GO SOUTH
P&S-ARE WILLING TO BE TOGETHER
___________________________________________________________________
THE TWO PARTIES MAY GO SOUTH&NORTH RESPECTIVELY
AT ONE POINT EACH MAY PASS EACH OTHER THEN GAURDS CAN EXCHANGE
6 Q BASED ON THIS
(8)pq-r/s =2 what is q inference a,n&d
(a) a can do n units of work in strs,a&b can do n units of work
in 2 hrs in how many hrs n units of work ans:3 hr 30 min
p = (2s+r)/q
____________
main()
{
int var=25,varp;
varp=&var;
varp p = 10;
fnc(varp)
printf("%d%d,var,varp);
}
(a) 20,55(b) 35,35(c) 25,25(d)55,55
[ c++,c,dbms interview]
[fundamentals]
this is new paper
______________________________________________________________
application -software
____________________
part-1:
28-questions
(5)ingless ans:RDMS
(1)bit program-ans d
(2)c ans
(3)+ 0 ans
(4)00p--ans linking
(5)------
(6)-------
(9)25--45 even no. ans--10
(10) >10 <100 ---ans=n+9
1]. The following variable is available in file1.c
static int average_float;
all the functions in the file1.c can access the variable
[2]. extern int x;
Check the answer
[3]. Another Problem with
# define TRUE 0
some code
while(TRUE)
{
some code
}
This won't go into the loop as TRUE is defined as 0
[4]. A question in structures where the memebers are dd,mm,yy.
mm:dd:yy
09:07:97
[5]. Another structure question
1 Rajiv System Analyst
[6]. INFILE.DAT is copied to OUTFILE.DAT
[7]. A question with argc and argv .
Input will be
c:\TEMP.EXE Ramco Systems India
-----------------------------------------------------------------------
main()
{
int x=10,y=15;
x=x++;
y=++y;
printf("%d %d\n",x,y);
}
----------------------------------------------------------------------
int x;
main()
{
int x=0;
{
int x=10;
x++;
change_value(x);
x++;
Modify_value();
printf("First output: %d\n",x);
}
x++;
change_value(x);
printf("Second Output : %d\n",x);
Modify_value();
printf("Third Output : %d\n",x);
}
Modify_value()
{
return (x+=10);
}
change_value()
{
return(x+=1);
}
----------------------------------------------------------------------------
main()
{
int x=20,y=35;
x = y++ + x++;
y = ++y + ++x;
printf("%d %d\n",x,y);
}
-----------------------------------------------------------------------
main()
{
char *p1="Name";
char *p2;
p2=(char *)malloc(20);
while(*p2++=*p1++);
printf("%s\n",p2);
}
----------------------------------------------------------------------
main()
{
int x=5;
printf("%d %d %d\n",x,x<<2,x>>2);
}
--------------------------------------------------------------------
#define swap1(a,b) a=a+b;b=a-b;a=a-b;
main()
{
int x=5,y=10;
swap1(x,y);
printf("%d %d\n",x,y);
swap2(x,y);
printf("%d %d\n",x,y);
}
int swap2(int a,int b)
{
int temp;
temp=a;
b=a;
a=temp;
return;
}
----------------------------------------------------------------------
main()
{
char *ptr = "Ramco Systems";
(*ptr)++;
printf("%s\n",ptr);
ptr++;
printf("%s\n",ptr);
}
---------------------------------------------------------------------
#include<stdio.h>
main()
{
char s1[]="Ramco";
char s2[]="Systems";
s1=s2;
printf("%s",s1);
}
-----------------------------------------------------------------
#include<stdio.h>
main()
{
char *p1;
char *p2;
p1=(char *) malloc(25);
p2=(char *) malloc(25);
strcpy(p1,"Ramco");
strcpy(p2,"Systems");
strcat(p1,p2);
printf("%s",p1);
}
