Network Prep Questions What is the function of the Multiple Link Interface Driver
component
Your company recently purchased 2 identical printers capable Choose the valid Class C network addresses. How many network segments can a single DHCP server provide services What is the primary protocol used for Name Resolution? Which two access methods would be best suited for time-sensitive What is the first thing ARP does when attempting to resolve a Which of the 802 committees LAN standards describes the Fiber-Optic List the reasons for needing to subnet your network.
of the ODI specification?
A. Supports the use of NDIS3 0 drivers with Microsoft and is useful
when integrating NetWare and Windows
B. Specifies which network board is installed and can handle packets
from different types of protocols
C. Serves as an intermediary (switchboard) between the LAN drivers
and communication protocols
D. Attaches a header to each data packet and delivers the packet
E. Intercepts requests for DOS services at the workstation and provides
services for files and printing
Answer: B
What is the binary value of 170?
A. 11110011
B. 10101010
C. 11111111.10111010.34.170
D. 11111111.10101010.00000001.00000000
Answer: B
of both PostScript and non-PostScript printing. You are tasked
with the following:
Primary Objective:
Allow users
to choose between PostScript and non-PostScript printing
Secondary
Objectives:
1. Provide fault tolerance such that if
one printer fails, the other automatically prints queued jobs
2. Allow management print jobs to have higher priority in
the print queue, thereby printing faster
Your Solution:
Run the Add Printer Wizard four times as follows: Printer1,
PostScript; Printer1, non-PostScript; Printer2, PostScript;
Printer2, non-PostScript.
A. The solution matches both the primary and all of the secondary
objectives
B. The solution matches the primary objective only
C. The solution does not match the primary objective but does match
all the secondary objectives
D. The solution matches the primary objective and one of the secondary
objectives
E. The solution will not work in this problem
Answer: B
A physical topology that requires a terminator at the cable ends,
to reduce signal reflection is:
A. Ring topology.
B. Bus topology.
C. Cellular topology.
D. Star topology.
Answer: B
A. 191.40.60.124
B. 224.14.20.60
C. 192.68.220.61
D. 221.40.256.24
Answer: C
What is the default lease life of a dynamically assigned IP address?
A. Permanent
B. For as long as the host is connected to the network
C. 72 hours
D. 36 hours
E. 24 hours
Answer: C
to?
A. No more than ten
B. One
C. Four
D. Unlimited
E. Two
Answer: B
What is the function of the Protocol Stack component of the ODI
specification?
A. Intercepts requests for DOS services at the workstation and provides
services for files and printing
B. Supports the use of NDIS 3 0 drivers with Microsoft and is useful
when integrating NetWare and Windows
C. Specifies which network board is installed and can handle packets
from different types of protocols
D. Serves as an intermediary (switchboard) between the LAN drivers
and communication protocols
E. Attaches a header to each data packet and delivers the packet
Answer: E
What is the decimal value of 10001011?
A. 139
B. 36
C. 25
D. 126
Answer: A
Your company recently purchased 2 identical printers capable
of both PostScript and non-PostScript printing. You are tasked
with the following:
Primary Objective:
Allow users
to choose between PostScript and non-PostScript printing
Secondary
Objectives:
1. Provide fault tolerance such that if
one printer fails, the other automatically prints queued jobs
2. Allow management print jobs to have higher priority in
the print queue, thereby printing faster
Your Solution: Install
an NT Server in this network. Run the Add Printer Wizard four
times with configuration as follows:
1. Printer name PostScript,
Print Pool enabled
2. Printer name NonPostScript, Print Pool
enabled
3. Printer name $MgmtPS, Print Pool enabled, priority
= 1
4. Printer name $MgmtNPS, Print Pool enabled, priority
= 1
A. The solution matches both the primary and all of the secondary
objectives
B. The solution matches the primary objective only
C. The solution does not match the primary objective but does match
all the secondary objectives
D. The solution matches the primary objective and one of the secondary
objectives
E. The solution will not work in this problem
Answer: A
The network class is determined by the beginning bits in the
first octet of an IP or network address. The first two bits
in a Class B network address are _______.
A. 01
B. 10
C. 11
Answer: B
Actual implementations of bus topologies usually limit the number
of taps because:
A. The OSI model allows no more than 50 taps per segment.
B. A small amount of signal strengthening occurs at each tap.
C. There is a small amount of signal loss and reflection at each
tap.
D. In a point-to-point connection signals distort and weaken over
distance.
Answer: C
Eric is concerned that his computer does not seem to be running
as efficiently as it did when he first installed it 4 months
ago. What tool can you, the administrator, use to determine
whether there is cause for concern?
A. System Monitor
B. Computer Monitor
C. Windows98 Monitor
D. Microsoft Network Server
E. Microsoft Network Client
Answer: A
Devices on a physical ring use:
A. Multipoint connections.
B. Bus signaling.
C. Point-to-point connections.
D. Separate repeaters to strengthen signals.
Answer: C
Describe the basic concept of Name Resolution.
A. Maps a computer name to a network
B. Maps a computer name to an MAC address
C. Maps a computer name to a WINS address
D. Provides a method of automatically assigning computer names
E. Provides a method of automatically assigning a computer name
and IP address
Answer: B
Assuming an IP address of 129.200.1.254, what is the network
class and default subnet mask?
A. Class A, 255.255.255.0
B. Class C, 255.255.255.0
C. Class A, 255.0.0.0
D. Class B, 255.255.0.0
Answer: D
Class D addresses can be used for individual hosts on your network
as long a you are not using ICMP Router Discovery.
A. True
B. False
Answer: B
When you install a DOS ODI workstation, which four tasks must
be completed?
A. Configure and install the NIC
B. Verify the PC is operational
C. Select the correct NIC for the existing cabling
D. Copy, create, or modify the AUTOEXEC.BAT, CONFIG.SYS, and NETUSE.CFG
files
E. Copy NETUSE.EXE and NDIS COM to the workstation
Answer: A, B, C & D
What is a valid host on a network of 137.4.142.0, with subnet
255.255.255.0.
A. 137.4.142.30
B. 137.4.142.0
C. 137.4.142.255
D. 137.4.143.30
E. 137.4.143.254
Answer: A
A physical topology that allows devices to roam while still maintaining
connection is:
A. Broadcast multipoint.
B. Cellular.
C. Mesh.
D. Broadcast point-to-point.
Answer: B
Yesterday's Question
The address 198.150.145.0 refers to ________________, and is
used in routing tables.
A. A default route on a Class C network
B. the network itself
C. "this" network
D. all hosts on network 198.150.145
Answer: B
A. IPX/SPX
B. NetBEUI
C. AppleTalk
D. TCP/IP
E. NCP
Answer: D
material?
A. CSMA/CD
B. CSMA/CA
C. Token passing
D. Contention
E. Polling
Answer: C & E
Assuming a default subnet mask, what is the network ID for a
host with an address of 192.200.254.1?
A. 192.200.254.0
B. 192.200 .0.0
C. 192.0.0.0
D. 255.255.255.0
E. 255.255.255.255
Answer: A
In the IP address 165.122.40.225 the node address is ____________.
A. 225
B. 40.225
C. 122.40.225
D. 165.122
Answer: B
host name?
A. Sends a broadcast packet
B. Purges ARP cache
C. Looks in Hosts file
D. Locates the DNS Server
E. Checks ARP cache
Answer: E
Which answers describe the function of network 0.0.0.0 best?
A. Refers to the default route.
B. Refers to "all" hosts on the network.
C. Is used to simplify routing.
D. Is used for broadcasts in variable length subnet masks
Answer: A & C
Attaching the network operating system protocol to the network
adapter card is called _____.
A. Installing
B. Adding services
C. Networking
D. Binding
Answer: D
You are given an address of 220.34.54.0 and you need 3 subnets
with at least 10 hosts per network ID. Which subnet masks could
be used?
A. 255.255.255.224
B. 255.255.0.0
C. 255.255.255.240
D. 255.255.255.192
Answer: A & C
By default, ARP entries are retained in memory for:
A. 2 minutes unless they have been reused, then they'll be retained
up to 10 minutes
B. 36 hours unless they are renewed half way before being purged
C. For as long as the PC remains connected to the network
D. 5 minutes unless a manual request is made to keep the tables
longer
E. 10 minutes or more if cache memory is not full.
Answer: A
The OSI Reference Model Service Access Point (SAP) is best described
as:
A. Predefined address points for communication between OSI layers
B. The points along the physical media where a weakened signal must
be regenerated
C. A predefined location on the storage media for data transfer
D. Any point where the user is able to modify data
Answer: A
Which subnet masks will provide 62 or more legal subnets given
a Class A network address ?
A. 255.255.255.0
B. 255.252.0.0
C. 255.255.0.0
D. 255.254.0.0
Answer: A, B, C & D
Yesterday's Question
The address 130.56.255.255 refers to _________________.
A. all hosts on a Class B network
B. "this" network
C. a subnetted Class B network
D. a broadcast
Answer: A
Technical Advisory Group?
A. 802.1
B. 802.10
C. 802.8
D. 802.12
E. 802.9
Answer: C
A. Reduce network traffic.
B. Your network is connected to the Internet.
C. Span large geographic areas.
D. Increase the number of available host IP addresses.
E. All answers are valid.
Answer: A, B & C
After subnetting, routers are used to ____________________.
A. increase Ethernet packet size
B. divide the network
C. connect bridges and gateways to hubs
D. link ODI drivers
E. calculate the CRCs as packets flow through the network
Answer: B
What name resolution protocol is most commonly used in large
environments including the Internet?
A. Hosts
B. WINS
C. NetBIOS
D. DNS
E. ARP
Answer: D
Specify the range of numbers for the network ID of Class C addressees.
A. 150 - 224
B. 193-225
C. 192-223
D. 128-191
Answer: C
Name 4 popular Top-Level Domain names:
A. COM
B. ORG
C. NET
D. USA
E. EDU
Answer: A, B, C & E
One method of transport layer error control is:
A. Using time-outs to drop packets that have been passed around
the network too long
B. Using an IPX retry count of more than 20
C. Requiring only reliable connectionless services
D. Limiting the number of segments into which a message can be divided
E. Not using checksums
Answer: A
Assuming a default subnet mask, what is the network ID for an
IP address of 192.1.2.1?
A. 192.1.2 .0
B. 192.2.1
C. 192.0.0.0
D. 255.255.0.0
E. 255.255.255.0
Answer: A
After subnetting, routers are used to ____________________.
A. increase Ethernet packet size
B. divide the network
C. connect bridges and gateways to hubs
D. link ODI drivers
E. calculate the CRCs as packets flow through the network
Answer: B
What is the function of the NetWare Shell component of the ODI
specification?
A. Serves as an intermediary (switchboard) between the LAN drivers
and communication protocols
B. Attaches a header to each data packet and delivers the packet
C. Intercepts requests for DOS services at the workstation and provides
services for files and printing
D. Supports the use of NDIS 3 0 drivers with Microsoft and is useful
when integrating NetWare and Windows
E. Specifies which network board is installed and can handle packets
from different types of protocols
Answer: C
