Most homeowners like their garage door to open with a click of one button but sometimes it doesn’t work because of the power outage, battery problem or simply the damaged motor unit. At that time opening the garage door manually is the only option. Opening the garage door manually involves the steps that look easy but are difficult to maneuver. If you cannot do it, call the Garage Door Repair Washington.
The door should be in down position – Make sure that your garage door is in down position before disengaging your garage door opener. Disengaging the opener when your garage door is up can be extremely dangerous especially when the spring of your garage door is broken. In that case, the heavy garage door can come crashing down which can damage anything that comes under the door or it can also damage the garage door itself. It’s important to note that if your garage door is stuck in an open position, you need to call Garage Doors in Washington quickly to prevent the damage from happening.
Pull the cord – Emergency cord is red in color and it hangs from the garage door trolley. The trolley is again attached to the door and move along with the door. The trolley is also attached with the opener. Opener carriage moves the door automatically along the rail/track. This emergency cord detaches the trolley from opener carriage so that the door can slide independently without the automated carriage. This way you can manually open or close the garage door. The cord needs to be pulled down and then towards the back, this will prevent the rope from getting stuck in the tracks. You will probably need a ladder to reach to the cord but don’t forget to remove the ladder afterward.
Take few people with you – This kind of work should always be done with a group of people especially if you intend to park your car in the garage so that while you drive your car, the others can hold the cord for you to keep the door open.
Re-attach the trolley to the opener carriage- There are two ways to reconnect the trolley – manually and automatically. To do it manually simply slid the door along the track until the connected point is re-engaged but make sure that the emergency cord spring lever is already in the connected position. To do it automatically, hit your garage door opener remote and it will connect the trolley to the attachment point easily. Contact Garage Door Repair in Washington to know more.
Dealing with garage door is a risky affair and if you are not comfortable doing it alone call Washington Garage Door Repair.