Site hosted by Angelfire.com: Build your free website today!
undefined
undefined
Product











PlanningDuring the planning process I used autoCAD to plan the size of the product and how I wanted the finished product to look.
 

Cutting: During the cutting I used wood, a measuring tape, combination square, and an electric saw to cut all the pieces of my planner.
 

Edge banding:During the edging I used the iron on glue banding. I cut it to the size needed then applied heat for one minute.
 

Sanding:After the edge banding the edges were rough, so with a little piece of sand paper I sanded down all the rough edges to have a smooth piece of wood.
 

Assembly: During the assembly I measured twice to make sure that the pieces were exactly where I wanted them to be. Afterwards I used a nail gun to assemble all my pieces together.
 

Finish:The finish is fairly easy. I stained the wood  and waited for it to dry. Once it was dry I put a shine on it. The drying process takes about a day depending on the amount of stain used. Once the drying process is over, the product is complete.
 
 
 

                                                                  Back to Main