A. Items Required:
1. Stainless Rumble Grab Handles part # A-41500-S 35.00 pair.

Supplier.
Midwest Early Ford
www.midwestearlyford.com
phone 800-543-5035

Installation. drivers side.

1. Remove existing handle, has a nut in the underside and a flat tip screw on the outside.
2. Enlarge the screw holes, the model a handles are slightly futher apart.
3. You can enlarge with a drill motor and a bit, just remember you have a power tool.
4. If you want you can use a rat tail file.Just remember you are wanting to elongate the holes.
5. The hole at the top is elongated toward the top, the hole at the bottom is elongated toeard the tail light.
6. Stop often and do atrial fit, when everything is aligned to your sastifation tighten down the bolts.