Router> enable
Router # configuration terminal
Router (config) #username Admin
Admin (config) #enable secret class
Admin (config) #enable password cisco
Admin (config) #access-list 1
Admin (config) #int e0
Admin (config-if) # ip access-group 1 in deny tcp any any eq 23
Admin (config-if) # ip address 172.16.2.1 255.255.254.0
Admin (config-if) # encapsulation frame-relay cisco
Admin (config-if) # no shutdown
Admin (config)#username Admin password cisco
Admin (config) # isdn switch-type basic-5ess
Admin (config) #int bri 0
Admin (config-if) # encapsulation ppp
Admin (config-if) # ppp authentication chap
Admin (config-if) # ppp chap hostname Admin
Admin (config-if)# ppp chap password cisco
Admin (config-if) # ip address 172.16.4.1 255.255.254.0
Admin (config-if) # default-network 172.16.18.0
Admin (config-if) # clock rate 56000
Admin (config-if) # bandwidth 1544 kbps
Admin (config-if) # no shutdown
Admin (config) #int s1
Admin (config-if) # ip address 172.16.16.2 255.255.254.0
Admin (config-if)# no shutdown
Admin (config-if)# exit
Admin (config) # router rip
Admin (config-router)# network 172.16.14.0
Admin (config-router) # network 172.16.13.0
Admin (config-router) # network 172.16.4.0
Admin (config-router) # network 172.16.10.0
Admin (config-router) # ip default-network 172.16.2.0
Admin (config-router) # exit
Admin (config) # ip host District office/Data Center 172.16.2.1 172.16.4.1 172.16.16.2
Admin (config) # ip host Service Center 172.16.8.1 172.16.10.1 172.16.4.2
Admin (config) # ip host Shaw Butte/Desertview 172.16.14.1 172.16.13.1 172.16.16.2 172.16.10.2
Admin (config) # line console 0
Admin (config-line) # login
Admin (config-line) # password cisco
Admin (config-line) # line vty 0 4
Admin (config-line) # login
Admin (config-line) # password cisco
Admin (config-line) # exit or control z
Admin (config) # exit
Admin # copy run start
Admin # show run
IP List-Desertview Config-Service Center Config-IP Addressing-Logical Topology
