Site hosted by Angelfire.com: Build your free website today!
undefined
undefined

This player is a step up from the  award-winning DN-2000F dual CD player, which has long been considered the “industry standard” by professional DJs when it first came out.  It's in good condition and was rarely used, since I mainly spin vinyl.

The original box and manual is also included.  

DENON DN-2500F




 

FEATURES
JOG DIAL / SHUTTLE WHEEL
	Each CD transport is controlled via a dedicated jog dial / shuttle
	wheel controls for fast and accurate search and scan.

PITCH ADJUSTMENT
	Pitch is adjustable using a long throw slider, providing an analogue
	feel.
PLAYBACK MODE SELECTION
	Unit can be set to either play the entire disc (continuous mode) 
	or play one track at a time then stopping (single play).

INSTANT START
	Playback starts within 0.01 seconds from the moment the play
	button is pressed.

PITCH CONTROL
	Provides pitch adjustment in 3 ranges:+/-4%, +/-8% and +/-16%,
	user selectable.

PITCH BEND
	Allows momentary speed up or slow down of the disc for beat
	matching.

SLEEP FUNCTION
	After 30 minutes the CD transport will go into "sleep" mode,
	which stops the disc rotation, placing the unit into standby,
	thus increasing	the life of the CD drive motors.

PRESET FUNCTIONS
	User adjustable settings are stored in non volatile memory so 
	that the unit is custom configured with the desired stettings
	at power on. Each transport has its' own presets.

CUE
	Cue function detects the start of the actual track contents
	rather than the time code of the track, and features adjustable
	detection levels.

SAMPLER
	A sampler function is included which provides over 8 seconds of
	stereo sampling per player. Sample playback is triggered by the
	PLAY/PAUSE button whilst in sampler mode.

KEY ADJUST
	The original key is preserved even though the playback pitch has
	changed.

VOICE REDUCER
	The voice reducer function reduces the vocals if they are center
	mixed.

BRAKE
	This function gradually reduces the playback speed before stopping.

CUSTOM SETTINGS MEMORY
	Memory functions for recording and recalling disc ID data, cue
	point data, loop & pitch settings.

DIRECT SEARCH
	Directly accesses a specific track or a specific point on the disc
	by using the number buttons.

SERVO AUTO STOP
	Auto stop the spindle motor.

SPECIFICATIONS
	TYPE			-	DUAL TRANSPORT C.D. PLAYER
	AUDIO CHANNELS		-	2 CHANNEL (stereo)
	DIGITAL FILTER		-	18 bit, 8 times oversampling
	D/A CONVERSION		-	18 bit linear / channel
	SAMPLING FREQUENCY	-	44.1kHz (normal pitch)
	T.H.D			-	<0.006%
	SIGNAL to NOISE RATIO	-	98dB
	CHANNEL SEPERATION	-	>96dB
	FREQUENCY RESPONSE	-	20Hz - 20kHz +/-1dB
	SAMPLING LENGTH		-	8 SECONDS
	MAX SCAN SPEED		-	OVER 20 TIMES NORMAL
	MAX MEMORY STEPS	-	200
	ANALOGUE OUTPUTS
	   TRANSFER & CONNECTOR	-	UNBALANCED RCA CONNECTOR
	   OUTPUT LEVEL		-	20Vrms / 10kOhm
	REMOTE CONNECTING CABLE	-	1 piece / 5 Metre
	POWER CONSUMPTION	-	27 Watts
	DIMENSIONS
		PLAYER		-	482mm x 88mm x 252mm (WxHxD)
					19in x 3.5in x 9.9in  (WxHxD)
		CONTROL UNIT	-	482mm x 132mm x 40mm (WxHxD)
					19in x 5.2in x 2.4in  (WxHxD)
	WEIGHT
		PLAYER		-	6kg, 11lbs
		CONTROL UNIT	-	3kg, 4.4lbs