MATERIAL LIST FOR TABLE SHOWN
( All Material Mild Steel )

• 4 - 2" X 3/8" X 12" Flat Stock ( Top )
• 2 - 2" X 2"X 3/16" X 18" Angle Iron ( Frame )
• 4 - 2" X 3/16" X 20" Flat Stock ( Legs )
• 4 - 2" X 3/16" X 3" Flat Stock ( Leg Pads )
• 2 - 2" X 2" X 3/16" X 2" Angle Iron ( Rod & Tool Holder )

There is spaces between the top pieces which allow material to be clamped to the table and room for dross during cutting. I alsoused two pieces of angle iron to make a welding rod and chipping hammer holder.