This Pan & Tilt was designed for surveillance vans and remote control, via two-way radio. The DTMF contol tones may be input by the output of a DTMF encoder or radio transmitter. The zoom lens may be plugged directly into the P & T lens connector. A built-in on/off relay will supply 12Vdc to a video transmitter
 

Our basic Pan &Tilt may be ordered without the DTMF decoder as a bare bones unit. This configuration comes with a P&T controller controller cable and battery case. This unit is compatible with HDS command and control R.F. links.
 

This new camera controller was developed for the Federal Government to control 4 independent cameras equipped with control receivers and video microwave transmitters. This unit will control up to 4 cameras equipped with DTMF decoders or RS232C decoder. An RS232C output is supplied to control a video switcher with RS232C input
 

This DTMF decoder/controller was designed for use with your 12V dc Pan & Tilt unit and our pinhole lens unit. The unit may also be used as a zoom lens controller. Output voltages are programmable. A controlled relay will switch 12Vdc on and off.
 

For the first time, a low cost method of mounting a camera and zoom lens that can pivot around a small hole or slit in a wall, survaliance van, window or electrical bix. Using our PTZ series of pan & tilts, this unit allows observation through a small hole at =/- 45 degrees panning and =/- a vertical FOV.