Focus 1 for sale  --- pictures below  - click on thumbnails for full size-
This is a straight, solid-flying airplane. I'm selling it because my Brio has arrived and I don't need three pattern planes.
It's flyable now; test flights available if you're within traveling distance of the central NJ shore (OK, OK, Garden State Parkway Exit 88...)
About the plane:
    I bought this plane from another active pilot in 2003 as a backup; it saw little use that season. Has been a backup except for part of the 2004 season.
    Guerin- built as indicated by the RC Design Workshops stickers on the tail
    Monokote-covered
    No crashes / arrivals while I've had it and none that I know of before that.
    Discovered that the stab was loose on one side in mid 2004 - was repaired immediately and has flown numerous times since then.
    Slight cracking in the cowl paint on the right top rear.
Comes with
    Hyde ARI mount  - set up for 140RX or similar. (Cowl appears also to be factory cut for YS exhaust  - see pics of left front
    Carbon wing tube - wing bolts are 6-32 Allen screws into nylon inserts in the tube
    Futaba throttle servo - it's a mini/micro, came w/ the plane, and works fine.
    All linkages - all ball-bearing on elev / ailerons, Kevlar pull-pull on rudder.
    Fuel tank w/ aluminum lines from tank to firewall (hey, it was nearly an ounce lighter than silicone)
    Remaining servos negotiable - JR digitals  - see below for details**

Asking $700.00 - will deliver w/ in 100 miles of NJ- cannot ship. Rick Wallace 
rickwallace45@hotmail.com
cell 732-330-0774

**All control surface servos are JR:   8231's on Ail      8411 Rudder      8417 on Elev   
Return to Rixplanes home page: Back to RixPlanes Home

.