PLEASE VISIT OUR NEW WEBSITE..AS THIS SITE WILL NOT BE UPDATED ANY LONGER....
OUR NEW WEB SITE IS AT....www.nxs-motorsports.com it is up to date bigger and better
or click this link www.nxs-motorsports.com
and then save into your favorites. Please give your PC browser 10-15 seconds for
the new web sites page to load the first time.
Dwarf Car & Modified Lite Race Car Parts
GSXR 1000 750 600 motors service and parts.
GSXR Wire harness service, Toyota 8 and 10 bolt axles. Car Parts
OIL SYSTEM PARTS
GSXR 1000 750 and 600 Billet short Oil Pans. Fits 01-08 gsxr 1000. Fits 01-05 gsxr 750 and 600. The pan itself is aluminum and will require the use of your stock drain plug. And a couple stock oil pan bolt gasket. You will need to be cut the existing oil pick up tube approx. 3/8" from bottom of billett pan. Be sure to reinstall the relief valve fromm your stock pan as well. If use on 07-08 GSXR 1000 BUT you will need to remove your existing pick up tube and use a pick up tube from 2001-2006 and the relief valve from your 07-08 oil pan. Pan is 2.25 O.S and 2.00 I.S. depth.....$279
2001-2008 GSXR 1000 Billet oil pans will require a pick up tube that can be cut and shortened to your pans depth. These are from 2002-2006 gsxr motors. 2007-2008 motors will reuire replacement of their stock metal pick up to these style pick ups. You will need to cut these 1/4 to 3/8 of an inch from the bottom of the billett oil pan......$30.
Aluminum Billet Oil Pan screw set of 14. For above billett oil pan........$30
2007-2008 GSXR 1000 stock oil pan gasket. This gasket is reuseable and comes on 07-08 gsxr 1000 motors. It can be used on all 2001-2008 gsxr motors and creates a windage tray affect that keeps the oil down in the pan so it does not splash up as much.....$20.
GSXR 1000 750 600 Stock oil pans..Many in stock..02-08. Call...................$45 and UP.
GSXR 1000 oil line adaptor. Goes to engine block and has O-ring groove and straight AN6 connection...................$23ea.
GSXR 1000 oil line adaptor. Goes to engine block and has O-ring groove and 90 degree AN6 elbow connection......$25ea.
GSXR 1000 750 600 oil sending unit fits all years 01-09...................$15.
#6 Push on Hose sold by the Foot. 7FT required for oil cooler connections................$3.75
AN6 with #6 push on barbed end for use with #6 Hose. Use this fitting to connect oil lines together......$4
2001-08 GSXR 1000 oil cooler..................................................$75