New Products in
stock!
Prices coming soon!
Our custom cables. .
. built from the best stuff!
All our TGR+
custom cables are made in our shop and feature top quality
materials, parts, workmanship, solder specifically meant for
electronics and shrink wrap at each end of the cables. If you have a
problem with the solder joints, we will repair them free for the
life of the cables, even if the problem was your fault (stepped
on it, accidentally cut it, used it for a tow rope).
TGR+ Microphone
Cables
We combine Neutrik XLR connectors & Dayton Pro microphone cable to make out TGR+ microphone cables.
Neutrik microphone XLR ends are the
world-wide accepted standard in professional audio connectors.
Rugged die-cast shells, proven contact quality and exceptional
manufacturing tolerances make Neutrik a leader in its field.
High quality, commercial grade microphone cable that's perfect
for high quality cables! Features two 22 ga. center conductors
(as opposed to 24 ga. found in many of the competitions' cables)
for a lower resistance and maximum signal transfer. Super
durable, yet flexible midnight blue PVC outer jacket. *Shield:
92% coverage bare copper braid .
TGR+ Instrument
Cables
Your choice of G & H Quiet Plugs, RightFoot or BigFoot plugs with ProCo's best instrument cable make up our super high quality TGR+ instrument cables.
The Quiet Plug is an
innovative 1/4" mono phone plug designed for use with
musical instruments. It allows a musician to plug and unplug the
instrument from the input of a live amplification system without
the annoying buzz and crackle which always occurs with
conventional connectors. The Quiet Plug is identical to the
BigFoot (#092-200) but utilizes a spring loaded ground shorting
sleeve. Made in the U.S.A.
BIGFOOT PLUG Copper tip
design standard 1/4" phone plug. Unsurpassed quality ensures
low noise and high conductivity connection. All metal/nylon
construction with external solder connections. Made in the U.S.A.
The RightFoot eliminates
many of the common problems found with the standard right angle
plug. Users no longer have to struggle with soldering to the
large steel plate or with keeping the screws from cross-threading
(assuming that there were mating threads to begin with). When
plug-ged in, the RightFoot does not cover up the jacks on either
side and it does not loosen up and cause snap, crackle or popping
sounds reminiscent of those made by a popular breakfast cereal.
Made in the U.S.A.
ProCo professional grade
guitar and instrument cable was designed to withstand the rigors
of on road touring. Each cable features a 20 gauge stranded
center conductor and a 100% coverage, extruded barrier PVC shield
plus a spiral wound copper shield. 90% coverage spiral copper
shield that is virtually noise and hum free! (Most economy cables use 32%
coverage shielding and many premium cables use 64% coverage
shielding)
TGR+ Speaker Cables
Put 14 GA 2 conductor power cable & G & H BigFoot copper tipped 1/4" plugs together and you have TGR+ Speaker Cables.
Copper tip design standard 1/4" phone plug. Unsurpassed quality ensures low noise and high conductivity connection. All metal/nylon construction with external solder connections. Made in U.S.A.
"This heavy duty power cable is very flexible making it
suitable for a variety of uses. From high power speaker cables on
a professional sound stage, to replacing the cords on small
appliances, the applications for this wire are unlimited. Premium
grade black rubber jacket allows good flexibility even in low
temperatures. Made in the U.S.A."
Front Page 2 3 4 5
