|
Warning: this is a htmlized version!
The original is across this link. |
#######
#
# E-scripts on using very small Linux systems to connect to Dos boxes.
#
# Note 1: use the eev command (defined in eev.el) and the
# ee alias (in my .zshrc) to execute parts of this file.
# Executing this file as a whole makes no sense.
#
# Note 2: be VERY careful and make sure you understand what
# you're doing.
#
# Note 3: If you use a shell other than zsh things like |&
# and the for loops may not work.
#
# Note 4: I always run as root.
#
# Note 5: some parts are too old and don't work anymore. Some
# never worked.
#
# Note 6: the definitions for the find-xxxfile commands are on my
# .emacs.
#
# Note 7: if you see a strange command check my .zshrc -- it may
# be defined there as a function or an alias.
#
# Note 8: the sections without dates are always older than the
# sections with dates.
#
# This file is at <http://angg.twu.net/a/e/mini.e>
# or at <http://angg.twu.net/e/mini.e.html>.
# See also <http://angg.twu.net/emacs.html>,
# <http://angg.twu.net/a/.emacs[.html]>,
# <http://angg.twu.net/a/.zshrc[.html]>,
# <http://angg.twu.net/escripts.html>,
# and <http://angg.twu.net/>.
#
#######
#######
#
# allowing nfs export
#
#######
# (find-fline "/etc/hosts.allow")
# (find-fline "/etc/hosts.deny")
man 5 hosts_access
man 5 hosts_options
########
#
# ne + nfs
#
########
# (find-esfile "hardware.e" "isa ne2000")
# At angg:
#
cd /boot/angg/
insmod 8390.o
function ne () {
echo "\nne $1"
grep ne /proc/modules > /dev/null && rmmod ne
insmod ne.o io=0x3a0 irq=$1
}
function ne+ () {
ifconfig eth0 down
ne $1
# ifconfig eth0 10.0.1.1 up pointopoint 10.0.1.3
ifconfig eth0 10.0.1.1 up
# ifconfig eth0 10.0.1.1 up netmask 255.0.0.0
ifconfig eth0
route add 10.0.1.3 dev eth0
ping -v 10.0.1.3
ifconfig eth0
}
ne+ 3
ne+ 5
ne+ 6
ne+ 7
ne+ 9
ne+ 10
ne+ 11
ne+ 12
ne+ 14
# Escolha um desses:
ne 3
# ne 5
# ne 6
# ne 7
# ne 9
# ne 10
# ne 11
# ne 12
# ne 14
ifconfig eth0 10.0.1.1 up pointopoint 10.0.1.3
ifconfig
route add 10.0.1.3 dev eth0
# At smil:
#
mkdir /C
mount /dev/hda1 /C
insmod /C/boot/plip.o
ifconfig plip1 10.0.1.2 up pointopoint 10.0.1.1
ifconfig
route add 10.0.1.1 dev plip1
mkdir /a
mount -t nfs 10.0.1.1:/ /a
ls /a
########
#
# plip + nfs
#
########
# «plipnfs»
# Standard way: rtfHOWTO!
# (find-fline "/usr/doc/HOWTO/NFS-HOWTO.gz" "3.4")
# (find-fline "/etc/init.d/netstd_nfs")
# (find-fline "/etc/exports")
# / (rw,no_root_squash)
/etc/init.d/netstd_nfs start
pmap_dump
rpcinfo -p 0.0.0.0
ifconfig plip1 down
rmmod plip
# At angg:
#
insmod /boot/angg/plip.o
ifconfig plip1 10.0.1.1 up pointopoint 10.0.1.2
ifconfig
route add 10.0.1.2 dev plip1
# At tosh:
#
mkdir /C
mount /dev/hda1 /C
insmod /C/boot/plip.o
ifconfig plip1 10.0.1.2 up pointopoint 10.0.1.1
ifconfig
route add 10.0.1.1 dev plip1
mkdir /a
mount -t nfs 10.0.1.1:/ /a
ls /a
######
#
# root.bin with plip+nfs
#
######
gzip -cd /big/deb20/debian/main/disks-i386/2.0.10_1998-07-21/root.bin > image
insmod $MODULES/loop.o
mountloop0L `pwd`/image
cat > /L/sbin/plip+nfs <<'---'
#!/bin/sh
mkdir /C
mount /dev/hda1 /C
insmod /C/boot/plip.o
ifconfig plip1 10.0.1.2 up pointopoint 10.0.1.1
ifconfig
route add 10.0.1.1 dev plip1
mkdir /a
mount -t nfs 10.0.1.1:/ /a
ls /a
---
chmod 777 /L/sbin/plip+nfs
cat > /L/sbin/ne+nfs <<'---'
#!/bin/sh
mkdir /C
mount /dev/hda1 /C
insmod /C/boot/8390.o
insmod /C/boot/ne.o
ifconfig eth0 10.0.1.3 up pointopoint 10.0.1.1
ifconfig
route add 10.0.1.1 dev eth0
mkdir /a
mount -t nfs 10.0.1.1:/ /a
ls /a
---
chmod 777 /L/sbin/ne+nfs
cat > /L/sbin/ne+nfs0 <<'---'
#!/bin/sh
mkdir /C
mount /dev/hda1 /C
insmod /C/boot/8390.o
insmod /C/boot/ne.o
ifconfig eth0 10.0.1.3 up netmask 255.255.255.0
ifconfig
sh /C/boot/neup
---
chmod 777 /L/sbin/ne+nfs
umountloop0
gzip -c6 image > root.bin
echo "loadlin.exe linux root=/dev/ram ro initrd=root.bin vga=1\n" > root.bat
#######
#
# dosemu
#
#######
# (find-fline "/usr/doc/dosemu/")
# (find-fline "/usr/lib/dosemu/")
# (find-fline "/usr/doc/dosemu/README.txt.gz" 1383)
# (find-fline "/usr/doc/dosemu/README.txt.gz")
# (find-esfile "dos.e")
umount /dev/loop0
losetup -d /dev/loop0
losetup /dev/loop0 /big/nonfree/dos622-1.cqmi
mount -o ro /dev/loop0 /S
setup-hdimage
# then...
########
#
# Monkey distribution
#
########
# 1ª parte: rodar o dosemu pra desarjar a distribuição; na mão.
# 2ª parte: tirar uns pedaços que eu não quero.
cd
umount /dev/hdd2
mkdosfs /dev/hdd2
mount -t msdos /dev/hdd2 /S
tar -xvzf /home/dos/monkey0.tgz -C /S
umount /dev/hdd2
mount -t umsdos /dev/hdd2 /S
rm -Rv /S/usr/X11R6 /S/var/X11R6
umount /dev/hdd2
mount -t umsdos /dev/hdd2 /S
mkdir /S
mount -t umsdos /dev/hdd2 /S
umssync /S
tar -xvzf /root/rootnfs.tgz -C /S
cd
umount /S
mount -t msdos /dev/hdd2 /S
cd /S
zip -9 -r /root/rootnfs.zip .
#######
#
# Lea - null modem
#
#######
/snarf/ftp/ftp.simtel.net/pub/simtelnet/msdos/sysinfo/snoop342.zip
/snarf/ftp/ftp.simtel.net/pub/simtelnet/msdos/sysinfo/stat_com.zip
/snarf/ftp/ftp.simtel.net/pub/simtelnet/msdos/telix/telix351.zip
# (find-fline "/home/root/SIMTEL/disc1/telix/tlx322_1.zip")
# (find-fline "/snarf/ftp/ftp.simtel.net/pub/simtelnet/msdos/telix/telix351.zip")
cd /snarf/ftp/ftp.simtel.net/pub/simtelnet/msdos/sysinfo/
mcopy * a:
snooper
alt-D
Lea: Porta serial externa: com1, 0x03F8, 16450, irq4.
Mouse: ?
Angg: tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
tty02 at 0x03e8 (irq = 4) is a 16550A
Como o mouse é ttyS0 e o modem é cua2, a externa deve ser o ttyS1.
setserial -a /dev/ttyS1
setserial /dev/ttyS1 baud_rate 56800
setserial -a /dev/ttyS1
stty -a < /dev/ttyS1
# 8N1:
stty cs8 -parenb -cstopb < /dev/ttyS1
stty -a < /dev/ttyS1
# (find-fline "/usr/doc/setserial")
# (find-fline "/usr/doc/lrzsz")
dpkg -i ~/HASH/lrzsz
# (find-fline "/usr/doc/HOWTO/Busmouse-HOWTO.gz" "Travelmate")
########
#
# plip + nfs, dec98 notes.
#
########
# Standard way: rtfHOWTO!
# (find-fline "/usr/doc/HOWTO/NFS-HOWTO.gz" "3.4")
# (find-fline "/etc/init.d/netstd_nfs")
# (find-fline "/etc/exports")
# / (rw,no_root_squash)
/etc/init.d/netstd_nfs start
pmap_dump
rpcinfo -p 0.0.0.0
ifconfig plip1 down
rmmod plip
# No angg:
#
insmod /boot/angg/plip.o
ifconfig plip1 10.0.1.1 up pointopoint 10.0.1.2
ifconfig
route add 10.0.1.2 dev plip1
# No tosh:
#
mkdir /C
mount /dev/hda1 /C
insmod /C/boot/plip.o
ifconfig plip1 10.0.1.2 up pointopoint 10.0.1.1
ifconfig
route add 10.0.1.1 dev plip1
mkdir /a
mount -t nfs 10.0.1.1:/ /a
ls /a
# (find-bffile "utilities/busybox/")
# (find-bffile "utilities/busybox/cp.c")
# (find-fline "/home/eet")
cd /C
/a/bin/tar -cvf - w* | gzip -c6 /a/home/root/TOSH/w.tgz
mountloop0L /big/deb20/debian/main/disks-i386/2.0.10_1998-07-21/drv1440.bin
mkdir /boot/hamm
cd /boot/hamm
tar -xvzf
cd /tmp
mountloop0L /big/deb20/debian/main/disks-i386/2.0.10_1998-07-21/resc1440.bin
# (find-k2file "drivers/net/plip.c" "insmod")
# (find-k2file "drivers/char/lp.c" "0x378")
# O plip no angg tem que o usar o endereço da lp1, que é 0x378. Será
# que ele é esperto? (Sim).
# (find-k2tag "icmp_echo")
# (find-fline "/usr/doc/HOWTO/NFS-HOWTO.gz" " 4.")
insmod /boot/angg/nfs.o
# mount -t nfs -o hard,intr 0.0.0.0:/ /L
# NFS: Error passed unconnected socket and no address
# mount: wrong fs type, bad option, bad superblock on 0.0.0.0:/,
# or too many mounted file systems
#
# (find-fline "/usr/doc/HOWTO/NFS-HOWTO.gz" "127.0.0.1")
# Moral: não é pra tentar usar NFS com uma máquina só.
######
#
# netbase/netstd sources
#
######
pdsc /debian/main/source/net/netbase_3.11-1.dsc
pdsc /debian/main/source/net/netstd_3.07-2.dsc
######
#
# telnetd
#
######
pdsc /debian/main/source/net/netstd_3.07-2.dsc
debian/rules |& tee odrb
# (code-c-d "netstd" "/usr/src/netstd-3.07/")
# (code-c-d "telnetd" "/usr/src/netstd-3.07/netkit-telnet-0.10/telnetd/")
# (find-fline "/usr/src/netstd-3.07/netkit-telnet-0.10/telnetd/")
# (find-telnetdfile "")
# (find-netstdfile "odrb")
# (find-netstdfile "odrb" "telnetd")
# (find-node "(binutils)Top")
# (find-node "(ld)Top")
# (find-node "(textutils)Top")
cd /usr/src/netstd-3.07/netkit-telnet-0.10/telnetd/
nm *.o > o
# (find-telnetdfile "o")
gcc -o tudo.o authenc.o global.o logout.o logwtmp.o setproctitle.o \
slc.o state.o sys_term.o telnetd.o termstat.o utility.o
# (find-telnetdfile "defs.h")
# (find-telnetdfile "ext.h")
# (find-telnetdfile "logout.h")
# (find-telnetdfile "logwtmp.h")
# (find-telnetdfile "pathnames.h")
# (find-telnetdfile "setproctitle.h")
# (find-telnetdfile "telnetd.h")
# (find-telnetdfile "authenc.c")
# (find-telnetdfile "global.c")
# (find-telnetdfile "logout.c")
# (find-telnetdfile "logwtmp.c")
# (find-telnetdfile "setproctitle.c")
# (find-telnetdfile "slc.c")
# (find-telnetdfile "state.c")
# (find-telnetdfile "sys_term.c")
# (find-telnetdfile "telnetd.c")
# (find-telnetdfile "termstat.c")
# (find-telnetdfile "utility.c")
# (find-telnetdfile "Makefile")
# (find-telnetdfile "issue.net.5")
# (find-telnetdfile "login.3")
# (find-telnetdfile "telnetd.8")
man issue.net
man login
man telnetd
#if defined(ENCRYPT) || defined(AUTHENTICATE)
#if defined(SecurID)
# (find-fline "/usr/doc/HOWTO/NET-3-HOWTO.gz")
# (find-fline "/usr/doc/HOWTO/NET-3-HOWTO.gz" "NFS and other Sun RPC")
# (find-fline "/usr/doc/HOWTO/NFS-HOWTO.gz")
# (find-fline "/etc/init.d/")
# (find-fline "/etc/init.d/netstd_nfs")
/etc/init.d/netstd_nfs stop
/etc/init.d/netstd_nfs start
strace -f -o s \
mount -t nfs 0.0.0.0:/ /S
# "mount: RPC: Program not registered"
strace -f -o s2 -p $(pidof inetd) &
mount -t nfs 0.0.0.0:/ /S
sleep 1
jobs
kill -s HUP %2
rpc error
rpcinfo -p
portmap
# (find-fline "/usr/man/man8/rpc.nfsd.8.gz" "nfs/2")
# (find-fline "/etc/inetd.conf")
nfs/2 dgram rpc/udp wait root /usr/sbin/rpc.nfsd rpc.nfsd
nfs/2 stream rpc/tcp wait root /usr/sbin/rpc.nfsd rpc.nfsd
A=(
info/mount.list
info/sysvinit.list
info/sysvinit.postinst
info/sysvinit.conffiles
info/netbase.postinst
info/kernel-headers-2.0.32.list
info/libc6-dev.list
info/manpages-dev.list
info/netstd.postinst
info/netstd.list
info/netstd.preinst
info/netstd.prerm
info/netstd.postrm
info/netstd.conffiles
info/doc-linux-text.list
methods/disk/shvar.harddisk
)
mycat $A
#######
#
# PLIP: low level tests
#
#######
# (find-k2file "drivers/net/plip.c" "insmod")
# (find-k2file "drivers/char/lp.c" "0x378")
# (find-k2file "drivers/char/lp_intern.c")
# (find-k2file "drivers/net/plip.c" "insmod")
# (find-k2tag "LPGETIRQ")
man 4 lp
0x0606
# (find-pl5pod "func" "=item ioctl")
# (find-pl5pod "func" "=item pack")
# (find-pl5pod "func" "=item unpack")
perl -e '
use Data::Dumper;
print Dumper(open(F, "/dev/lp1"));
$irq = "abcd";
print Dumper(ioctl(F, 0x0606, $irq));
print Dumper(unpack("i", $irq));
'
insmod $MODULES/plip.o io=0x3bc irq=7
insmod $MODULES/lp.o
chardev 6 lp no irq 0378-037f : lp
######
#
# PLIP on a root.bin
#
######
ifconfig plip1 10.0.1.1 up pointopoint 10.0.1.2
ifconfig
# (find-esfile "debian0.e" "root.bin")
umount /dev/loop0
losetup -d /dev/loop0
insmod $MODULES/loop.o
mkdir /L
gzip -cd /big/deb20/debian/main/disks-i386/2.0.10_1998-07-21/root.bin \
> /home/rootdisk
losetup /dev/loop0 /home/rootdisk
mount /dev/loop0 /L
man exports
man rpc.nfsd
agrep nfsd $HAI/../../Contents
dpkg -L netstd
ldd /usr/sbin/rpc.nfsd
pdsc /debian/main/source/net/netstd_3.07-2.dsc
cd /usr/src/netstd-3.07/
debian/rules binary |& tee odrb
A=(
/lib/ld-2.0.7.so
/lib/libc-2.0.7.so
/lib/libcrypt-2.0.7.so
/lib/libnsl-2.0.7.so
/lib/ld-linux.so.2
/lib/libc.so.6
/lib/libcrypt.so.1
/lib/libnsl.so.1
/usr/sbin/rpc.nfsd
/bin/setserial
/usr/bin/rz
/usr/bin/sz
/sbin/ifconfig
)
du -c $A
dpkg -L lrzsz
######
#
# rz/sz on a root.bin
#
######
# (find-esfile "debian0.e" "root.bin")
#######
#
# root.bin with nfsd
#
#######
umount /d2/proc
umount /dev/hdd2
# mke2fs -c /dev/hdd2
mke2fs /dev/hdd2
mount /d2
rm -Rv /d2
tar -C /d2 -xvzf /root/rootdisk.tgz
A=(
/bin/setserial
/lib/libc-2.0.7.so
/lib/libcrypt-2.0.7.so
/lib/libcrypt.so.1
/lib/libnsl-2.0.7.so
/lib/libnsl.so.1
/usr/bin/rz
/usr/bin/strace
/usr/bin/sz
/usr/sbin/rpc.nfsd
/etc/nsswitch.conf
)
for i in $A; do cp -diPv $i /d2; done
# /lib/libnss*
A=(
/lib/ld-2.0.7.so
/lib/ld-linux.so.2
/lib/libc.so.6
/sbin/ifconfig
)
for i in $A; do laf $i /d2/$i; done
for i in $A; do rm /d2$i; cp -diPv $i /d2; done
echo '/ *(rw,no_root_squash)' > /d2/etc/exports
cd /d2
tar -cvzf /root/rootnfs.tgz *
# mount -t proc proc2 /d2/proc
# cd /d2
# chroot /d2 bin/sh
# (find-node "(libc)NSS Basics")
# (find-fline "/etc/nsswitch.conf")
cd
umount /dev/hdd2
mkdosfs /dev/hdd2
mkdir /S
mount -t umsdos /dev/hdd2 /S
umssync /S
tar -xvzf /root/rootnfs.tgz -C /S
cd
umount /S
mount -t msdos /dev/hdd2 /S
cd /S
zip -9 -r /root/rootnfs.zip .
A=(
/bin/setserial
/usr/bin/rz
/usr/bin/sz
)
for i in $A; do cp $i /L/$i -v; done
# Depende de: libreadlineg2-dev g++ libstdc++2.8-dev
# Tirar uns lixos (até talvez os instaladores), colocar nfsd, inetd
# (?), ifconfig, ping, e talvez route. Reempacotar esse disco, pôr em
# disquete num arquivo, fazer um script de loadlin que leia o kernel
# que já está no hd com vga=1 e root=a:myroot.bin. Antes de rodar tudo
# isso ver se os programas novos ficam felizes com as libs que já
# estão no disco, usando um chroot. É preciso montar uma cópia do proc
# no /L. Ver se eu posso pôr também um telnetd. Os programas que eu
# vou copiar pra esse disco têm que ir stripados.
#######
#
# boot-floppies source
#
#######
# (find-enode "Version Control")
# (find-efile "vc.el")
# (find-efile "vc-hooks.el")
pdsc /debian/main/source/admin/boot-floppies_2.0.11.dsc
cd /usr/src/boot-floppies-2.0.11/
rm -Rv CVS
chmod 666 Makefile
# (set-file-modes (bfsrcfile "Makefile") 438)
# (find-bfsrcfile "Makefile")
dpkg -iE libc6-pic newt0.21-dev popt slang0.99.38-dev slang0.99.38-pic sysutils
dpkg -iE boot-floppies
#######
#
# Lea, telix + minicom
#
#######
dir /a/f/s > odirafs
pz -Pro -Jhrs
tr -d \\r < odirafs > odirafs.u
del /f/s/y \freud\dos
# (find-fline "~/LEA/odirafs.u")
pz -Pro -Jhrs x.zip 4dos\*.* 4dosold\*.* edrx\*.* lotus2\*.* mu\*.*
#######
#
# boot-floppies
#
#######
insmod /boot/angg/loop.o
rm -Rv /usr/src/boot-floppies
dpkg -i ~/HASH/boot-floppies
cd /usr/src/boot-floppies/
(cd documentation
cat install.sgml > install.txt
)
make archive=/big/deb20/debian/main/binary-i386 \
incoming=/home/incoming |& tee om
# (find-bffile "Makefile")
# (find-fline "/snarf/ftp/ftp.pathname.com/pub/fhs-2.0.tar.gz")
rm -Rv /usr/src/fhs/
cd /usr/src/
tar -xvzf /snarf/ftp/ftp.pathname.com/pub/fhs-2.0.tar.gz
cd /usr/src/fhs/
######
#
# kernel NFS server
#
######
# (find-k21file "scripts/kconfig.tk" "NFS server support")
# (find-k21file "Documentation/Configure.help" "CONFIG_NFSD")
# (find-k21file "fs/nfsd/")
# (find-fline "/snarf/ftp/ftp.mathematik.th-darmstadt.de/pub/linux/okir/nfs-server-2.2beta37.tar.gz")
rm -Rv /usr/src/nfs-server-2.2beta37/
cd /usr/src/
tar -xvzf /snarf/ftp/ftp.mathematik.th-darmstadt.de/pub/linux/okir/nfs-server-2.2beta37.tar.gz
cd /usr/src/nfs-server-2.2beta37/
# (code-c-d "nfss" "/usr/src/nfs-server-2.2beta37/")
# (find-nfssfile "")
######
#
# TinyLinux CD
#
######
# (find-fline "~/CB/stp-ls-lR.i" "idiot")
# (find-k2file "Documentation/initrd.txt")
# (find-k2file "drivers/block/rd.c")
# (find-k2file "fs/minix/")
# (find-fline "/cdrom/TinyLinux/")
# (find-fline "/cdrom/TinyLinux/LRP/dists/stable/kernel/kernel-36pre2-1.tar.gz")
insmod $MODULES/loop.o
# mountloop0L /cdrom/TinyLinux/LRP/dists/stable/idiot.image-2.9.3-1.44MB
mountloop0L /debian/TinyLinux/LRP/dists/stable/idiot.image-2.9.3-1.44MB
tar -tvzf /L/root.lrp
tar -tvzf /L/etc.lrp
tar -tvzf /L/log.lrp
tar -tvzf /L/modules.lrp
# (find-fline "/cdrom/TinyLinux/LRP/dists/stable/")
# (find-fline "/L/")
# Writing to a floppy (and testing)
#
cat /cdrom/TinyLinux/LRP/dists/stable/idiot.image-2.9.3-1.44MB > /dev/fd0
mount /dev/fd0 /A
diff -qrs /L /A
# (find-fline "/L/syslinux.cfg")
#
# display syslinux.dpy
# timeout 0
# default linux
# append=load_ramdisk=1 initrd=root.lrp initrd_archive=minix ramdisk_size=4096 root=/dev/ram0 boot=/dev/fd0,msdos LRP=etc,log,modules
umountloop0
umount /cdrom
# (find-fline "/usr/doc/syslinux/")
# (find-fline "/usr/doc/loadlin/")
# (find-fline "/usr/doc/loadlin/quicksta.rt.gz")
loadlin
# (find-k2file "Documentation/")
# (find-k2file "Documentation/ramdisk.txt")
# (find-k2file "Documentation/initrd.txt")
# (find-k2file "drivers/block/rd.c")
######
#
# LRP on the net
#
######
cd $S/http/www.linuxrouter.org/
# (find-fline "$S/http/www.linuxrouter.org/")
getlinks < $S/http/www.linuxrouter.org/download.shtml
ftp://ftp.linuxrouter.org/linux-router/
ftp://sunsite.unc.edu/pub/Linux/distributions/linux-router/
mynetselect $(<<'---'
ftp.linuxrouter.org
ftp.cpwright.com
lrp.rutgers.edu
sunsite.unc.edu
ftp.xtdnet.nl
sunsite.ktu.lt
mirror.aarnet.edu.au
ftp.clear.net.nz
mailtrans.sote.hu
ftp.di.fct.unl.pt
---)
# (find-fline "~/o2")
cd $S
mkdir -p ftp/ftp.linuxrouter.org/linux-router/
mkdir -p ftp/sunsite.ktu.lt/pub/linux/distributions/
cd ftp/sunsite.ktu.lt/pub/linux/distributions/
[[ -e linux-router ]] || ln -s ../../../../ftp.linuxrouter.org/linux-router .
psne ftp://sunsite.unc.edu/pub/Linux/distributions/linux-router/
#####
#
# initrd-archive
#
#####
psne ftp://ftp.psychosis.com/linux/initrd-arch/
psne ftp://ftp.psychosis.com/linux/initrd-arch/README
psne ftp://ftp.psychosis.com/linux/initrd-arch/linuxrc-always_2-2.0-diff.gz
psne ftp://ftp.psychosis.com/linux/initrd-arch/initrd-archive_2.1_2.0.37pre8.diff.gz
# (find-fline "$S/ftp/ftp.psychosis.com/linux/initrd-arch/")
#####
#
# plin: plip Linux
# 00jan31
#
#####
# «plin»
# This is a modified Slink rescue floppy that can be used to connect
# tosh, a 486 laptop (ip 10.0.1.4), to angg (ip 10.0.1.1) using plip.
# It guess that it is working but my plip cable is broken (and no, I'm
# not cheating, I really believe in this).
# Nota que isso só vai funcionar porque o kernel tem minix, fat, msdos
# (vfat, às vezes), ramdisk, initrd, coisas de rede, lp, plip e talvez
# loop; além disso, ele está configurado para 386.5 Onde tem a lista
# do que precisa? Na página do Tom Fawcett?
# Tou tirando várias opções: APM, APM_POWER_OFF,
# (find-k2file ".config")
# (find-es "slink" "rescue_floppy_files")
# (find-fline "/big/slinkb1/dists/slink/main/disks-i386/current/")
mountloop0L /big/slinkb1/dists/slink/main/disks-i386/current/resc1440.bin
rm -Rv /tmp/resc1440/
mkdir /tmp/resc1440/
cd /L
cp -dipvR * /tmp/resc1440/
cd /tmp/resc1440/
laf
cd /tmp/resc1440/
zcat < root.bin > rootbin
mountloop0L /tmp/resc1440/rootbin
mkdir /L/edrx/
mkdir /L/A /L/C /L/nfs
cd /boot/angg/
cp -iv plip.o lp.o nfs.o /L/edrx/
cp -iv k2038 /tmp/resc1440/k20xx
# My scripts
# (find-angg ".zshrc" "heredoc")
# (find-fline "$ES/mini.e" "At smil:")
heredoc /L/edrx/0 -m 777 <<'---'
#!/bin/ash -v
mount -t msdos /dev/hda1 /C
mount
insmod /edrx/plip.o
ifconfig plip1 10.0.1.4 up pointopoint 10.0.1.1
ifconfig
route add 10.0.1.1 dev plip1
route
---
umountloop0
cd /tmp/resc1440/
gzip -c6 rootbin > plinroot.gz
laf
rm -v root.bin rootbin
## loadlin
##
# (find-vldifile "loadlin.list")
# (find-fline "/usr/doc/loadlin/")
# (find-fline "/usr/doc/loadlin/quicksta.rt.gz" "/dev/ram"))
# (find-fline "/tmp/resc1440/")
crlf > /tmp/resc1440/plin.bat <<'---'
smartdrv /C
loadlin k20xx root=/dev/ram rw initrd=plinroot.gz vga=1
---
gzip -cd /usr/lib/loadlin/loadlin.exe.gz > /tmp/resc1440/loadlin.exe
## syslinux
##
cd /tmp/resc1440/
rm -v debian.txt f1.txt f10.txt f2.txt f3.txt f4.txt f5.txt f9.txt
rm -v readme.txt type.txt
rm -v rdev.sh install.sh
rm -v ldlinux.sys syslinux.cfg linux
# (find-es "floppy" "syslinux")
#
crlf > bootmsg.txt <<'---'
Plip Linux boot disk, using kernel 2.0.38.
Choose from: plin
Default is plin.
---
crlf > syslinux.cfg <<'---'
display bootmsg.txt
timeout 50
prompt 1
default plin
label plin
kernel k20xx
append root=/dev/ram rw initrd=plinroot.gz vga=1
---
cd /tmp/resc1440/
mcopy -ov * a:
syslinux /dev/fd0