high power supply voltage

A welding power supply is a device that provides an electrical current to perform welding. Welding usually requires high current (over 80 amps) and it can need above 12,000 amps in spot welding. Low current can also be used; welding two razor blades together at 5 amps with gas tungsten arc welding is a good example. A welding power supply can be as simple as a car battery and as sophisticated as a modern machine based on silicon controlled rectifier technology with additional logic to assist in the welding process.

Classification

Welding machines are usually classified as constant current (CC) or constant voltage (CV); a constant current machine will vary its output voltage to maintain a steady current while a constant voltage machine will fluctuate its output current to maintain a set voltage. Shielded metal arc welding will use a constant current source and gas metal arc welding and flux-cored arc welding typically use constant voltage sources but constant current is also possible with a voltage sensing wire feeder.

The nature of the CV machine is required by gas metal arc welding and flux-cored arc welding because the welder is not able to control the arc length manually. From multipiers, diodes, dc - dc converters to surge arresters, test equipment and custom high voltage power supplies, High Voltage Power Systems is a leader in high voltage High Voltage DC-DC Converters.