Site hosted by Angelfire.com: Build your free website today!
 

About Me

                                                                                            

                                                                                                   April 02, 2002

Home
About Me
Resume
Academics
Interests
Photo Gallery
Guestbook

 

Welcome to my Web site!

I was born in one of the most beautiful cities, Rize, in Turkey on September 26, 1969.  I am 5 feet 10 inches (175cm) tall, 185lb (82 kg) with green eyes. I had spent first 19 years of my life in a small town (population around 6,000) called Iyidere that is 10 miles West of Rize on the Black Sea Coast. 

I went to Iyidere Merkez Ilkokulu (Elementary School) from 1975 to 1980 and then Iyidere Lisesi from 1980 to 1986 (Middle High School and High School, respectively).  After high school, I went to Istanbul where two continents meet for my college education.  I did my Bachelor of Science Degree (BS) at Forestry Engineering Department of University of Istanbul, in Bahcekoy-Istanbul, Turkey.

After my BS Degree, I got a scholarship from Ministry of Education of Turkey to do my master and Ph.D. degrees in the United States.  I came to United States on June 18, 1993. First I went to Indiana State University to improve my English. Six months after that, I started pursuing my master degree at Purdue University, Indiana.  I graduated with an MS degree in the field of Quality Engineering and Furniture Engineering on December 18, 1995.   I graduated from Purdue University  with a Ph.D. Degree on April 18, 1999 in the Field of Industrial and Furniture Engineering. 

I started teaching Production Cost Analysis course at Industrial Technology Department of Purdue University on January 5, 1999. While I was teaching at Purdue University, I did my second master degree in Industrial Engineering Department specializing on Production Control.

On March 20, 2000, I started working at American Axle and Manufacturing Inc, as a Senior Corporate Industrial Engineer. After working at American Axle and Manufacturing about a year, I had worked on a project for Mechanical Products Inc. for 3 months.  Currently, I am working for Cyberlogic Technologies, Inc. as an Industrial Engineer.  I am also an Adjunct Faculty at Engineering Technology and Mechanical Engineering Departments of Lawrence Technological University and University of Phoenix, in Southfield, Michigan.

Home | About Me | Resume | Academics | Interests | Photo Gallery | Guestbook

This site was last updated 04/02/02

Send mail to Serhat Eren with questions or comments about this web site.
All rights reserved. Copyright © 2001, Serhat Eren