Underwater video camera housing kits
Diving Camera Housings
Scroll down and take a look at my U\W video camera housing built from my kit. Total cost for you to build your own housing using my kit is $269 + shipping over 15 US Dollars.
If you want to try to build your own housing and are
good with some power tools like a sander, router, jigsaw, and drill, I can send you the kit. This kit includes a complete set of plans, parts, and a tool list (telling where you can almost
surely get everything to complete of your housing.) The plans have full directions with color pictures which clearly show how to construct your housing step by step. If interested, email me for more info on this fun project.
This is a view of the front of the case with the camera
installed.
Here you see the rear view with the same camera inside.
Using my plans, you build your own housing that is
customized to operate your video camera. It's up to you what controls you put
in. The plans give you step by step instructions on building the housing and show
you how to make and install the control fittings for Power on\off, zoom\wide angle, and
record\pause, you choose which ones you want. (This means that you DON'T have to pay
over $1000.00 for a U\W housing that requires you to purchase a particular camera that
fits. You build the case to fit your camera!) My housings are easy to build and VERY FUN
to use. Great for scuba divers or snorklers. Tested to over 164 feet, but can go well past
that depth. (I just haven't been past 164 feet on a test dive yet.) Take a look at some of my
pictures. These are actual pictures that I pulled off
of tapes recorded while using my housings.