|
This
shows how to connect the wires from PSX
extension to the DB25.
For PSX you can hookup an additional controller.
To do so, duplicate all connections except DB-10
and DB-12 the following table will explain:
(Note: Once the second controller is hooked up,
if you have problems, try increasing the PSX
scan delay in the control panel.)
| Instead
of DB-10 |
Instead
of DB-12 |
| DB-13 |
DB-15 |
The
Schematic Diode and what an actual diode would
look like.
It is important that you have the diodes lined
up right for the connection to work.
DB-25 Pin
order:
13 12 11 10 9 8 7 6 5 4 3 2 1
25 24 23 22 21 20 19 18 17 16 15 14
Where the cables should be soldered.
|
