undefined
This engine is used in the Celica GT4, Supra Turbo, MR2 SW20 and Japanese GT300 race league. Base power is aound 220 HP to 245 HP depending on which revision you use. The engine adds 30 lbs more weight but is extremely reliable.
Price: Around £1250 for a Rev1, £1500 for a Rev2 and £2500 for a Rev3.
This engine is used in the 2000 Celica and Corolla T Sport Editions. Power is uprated to 190HP. This setup is used in the TP Spirit MR-S. Several modifications are needed.
Price: Around £1800 for a good engine, gearbox and ECU.
Trial make a 3ZZ using 1ZZ stroke and 2ZZ bore to achieve 1931cc.
Contains: Engine Crank, Connecting Rods, Pistons,
Crank End Spacer Ring, Crank End Oil Seal, Front Spacer Washer, Metal Head Gasket
Price: $2155.00
For a base, a new or used 2zz engine must be provided.
Original mounts are slightly modified and used.
Apexi power FC or HKS F-Con V-Pro are suggested upgrades for maximum performance. The car will run normally without any fuel modifications.
After the kit you get about 220 hp.
The Engine will hold up to 8,000 RPM.
Available through Trial USA
This is a 3.0 litre V6 engine as used in the Toyota Camry range. Power output is 258bhp. This engine was used in TTE's prototype MR-S V6.
Price: around $5000 to $6000 if the work is done independently. Labour time is in the region of 40hours
Additional parts for replacement include: ecu, complete custom wiring harness, intake, header, exhaust, coolant lines, thermostat housing, tranny, custom axles, engnine mounts, custom dipstick tube, alternator, custom alternator bracket, starter, custom linkage, fuel line, fuel pump and regulator. Here is a picture of it fitted into a regular MR2.
