You will Need:
1. Hanging File folders.
2. Vinyl Sheet Protectors (not essential, you can use
light card stock if you don't want see-thru pockets).
3. Standard office stapler.
Instructions:
1. Cut your File folders as indicated in Figure 1.
2. Use an X-acto knife and a ruler to cut the right and left edges from
the sheet protectors, and the bottom, so you have two separate thin vinyl
sheets. Then fold each of these in half lengthwise.
3.
Follow the instructions in Figure 2 and Figure 3 to finish up.
Figure 1. Cut the hanging files
Figure 2. Mark the center line.
Figure 3. Slide the folded sheet protector over the file and staple in
place.
This will give you 2 pockets front and 2 back...4 per hanging file!
|