Site hosted by Angelfire.com: Build your free website today!

The Very Cool MOD Chip
 

How To Use Dino-Mode

Dino-Mode is built into our Stealth Multi-Mode 7-Wire MOD Chips.

If you are having problems playing backups of some newly released games, you can program the Multi-Mode chip to your game's timing sequence using the Dino-Mode. When timing is matched, Dino-Mode will load most any game.

To use the Dino Mode, follow the instructions below. If you use the wrong timing sequence, simply turn off the Playstation and the chip will default back to its normal stealth mode. 

To enter Dino-Mode you must hold down the "Reset" button for 3 seconds. You must release the reset button after each 3 seconds mode. See Chart Below.

Press reset for at least 3 secs for Chip disable.
  This mode will play all Original Games.
Press reset for another 3 secs for 4 wire mode.
Press reset for another 3 secs for Dino-Mode 1.
Pressing reset and releasing for 1 second or more moves from Dino-Mode 1 to Dino-Mode 2 to Dino-Mode 3 etc...
  The game should load with Dino mode 1, 2 or 3...

Note: Be sure to record the Dino-Mode number that activates a particular game. This way you can simply go directly to that Dino-Mode the next time you would like to play that game.

These modifications and/or MOD chips are not produced or endorsed by the Sony or Sega Corporations nor any of its affiliates or representatives, therefore they hold no responsibility for the use of these modifications with their products. PlayStation and Dreamcast are registered trademarks of Sony Computer Entertainment Corporation and Sega Corporation respectively, to which we have no affiliations.