ModKing.com     Game Enhancer Directions     ModKing.com

   Game Enhancer Switch:

Switch Down = GameEnhancer OFF (boots up all games without White and Black Sony screens - faster bootup)
Switch up = GameEnhancer ON (On screen controls for every feature of the game enhancer)

   Playstation Controller Key Information:

Circle = Select (or Forward)
X = Cancel (or Back)
Triangle = Delete
Square = Edit Codes

READ CAREFULLY! - Switch From NTSC to PAL: DON'T SWITCH FROM NTSC TO PAL UNLESS YOU HAVE A PAL TV AND A PAL PLAYSTATION! If you switch from NTSC to PAL you might damage your game-enhancer! If you live in the USA you DO NOT want to switch from NTSC to PAL for ANY reason! If you live in the USA YOU DO NOT HAVE A PAL TV! Only if you have a PAL TV and PAL Playstation and live OUTSIDE of the USA do you want to do the following - Press L1, select and then press "O" to select.

   Normal Start:

Game-Enhancer Side Switch in the Down position - This Starts normal games with no codes & bypasses the white and black screens.

   Start Game with Code:

This will load the game using the codes you have selected. The currently selected cheat title appears at the bottom of the menu.

   Select Cheat Code:

This will bring you to a list of cheat codes that are currently installed on your Game Enhancer. Use your controller to move up and down the list. When you find the game you want press the "O" button to select it. This will bring you to a list of available cheat codes for that particular game. Use your controller to move up and down the list. When you find the code you want to enable just press the "O" button. A + symbol will appear next to the code to show that it has been selected. You may select as many cheat codes as you like. To deselect a cheat code just press the "O" button. You can obtain good cheat codes from the links page at www.angelfire.com/super/modking Note: some cheat codes do not work on all versions of some games. If a code(s) does not work, find some known working codes and replace the non-working codes with these by using the Add a Code instructions or edit the non-working codes.

   Add a Code:

Before adding new codes with your controller you must DELETE codes because the game enhancer is shipped with the maximum amount of codes in memory. There are code's coming out for new games all the time. You can use "action replay", "game buster" and most "game shark" codes found on the Internet and in magazines. First go into SELECT CHEAT CODE and go to NEW GAME and Press "O". Go through the steps (enter name, master code - not necessary, type of code, the actual code) hit "X" each time to save. When entering game titles the title must end with "-USA" for USA games, "-JAP" for Japanese titles and "-UK" for European titles. Some of the cheat codes are made for Japanese games and you may want to delete them.

   Delete a Code:

Highlight any code you wish to delete and the "triangle" key, Then hit "X" to confirm the delete.

   Memory Manager:

This section works essentially the same way as the PlayStation's built-in Memory Card Manager, but is faster and easier to navigate.

1. COPY - Copy a single block
2. COPY ALL - Copy the entire memory card
3. DEL - Erase a single block from a card - Yes/No - Defaults to No
4. DEL ALL - Erase the entire memory card - Yes/No - Defaults to No
5. EXIT - Exit the memory manager

   V-Ram Image Viewer:

This will view the contents of the PlayStation's VRAM at the time RESET was pressed.

   Directional Pad - Pan Around:

L1 - Increase horizontal resolution
R1 - Decrease horizontal resolution
L2 - Toggle vertical resolution (240/480)
R2 - Toggle bit depths (16/24)
O  -  Fast Pan (when used in combination with directional pad)
Triangle - Move status window
X - Exit

   CD-ROM Viewer Plus (a file explorer) :

This lets you view the computer files of the game that is in the Playstation. You can find and start movie and sound files.

   Playing Game Movies & Music:

STR / MOV - Streaming Movie (Game Cinema)

XA / XA1 - PlayStation Audio (Game Music)

EXE - Executable File

Use your controller to move to the file you wish to view. Once you select the file you will see a screen showing you it's contents. You can then choose what you want to play by pressing the "O" button. The "Triangle" button will analyze the currently selected file.

   Playing Backup (CD-R copies) and Import Games:

1.) Setup your playstation to "think" the door is always closed by inserting the custom manufactured spring given with the Game-Enhancer. You will only have to do this once.