Here's the re arranged interior. Notice the Radiator ?? Its standing, aint laying side way. Does it matter ??

Click here to see my system spec & temperature

Notice the Radiator ?? Its standing, aint laying side way. Does it matter ??

Here's the back. Radiator with a 120 mm Sunnon fan. Iam thinking of removing the smaller 2 exhaust fans too. Thought since its water cooled, they aren't need much ???

Closer look on the back. Notice how I "force" in the screws ?? It fits tight anyway ;)

DangerDen Maze 3 blocky.

Closer look on the block. It looks ugly with silicon around the end of the tube.

The lower part of the cpu.

My standing radiator. Does it make difference for them to stand or side way ??  I stand it up cos its easier on the hose.

My GF3 vga. The ram sink has got additional sink on them too. The bigger one is from the original core's sink ;)  Previously I sticked them with double sided tape .... lol   After some advices & tips, I used adhesive thermal paste & some super glue. It stick better & heat is transfered more efficienly this time round ...... Great !! Thanks to whoever that gave me those tips !!

Lastly, this is my "fresh" water reservoir. Coolant is about 10% & rest water right ??? Ok, here's one thing I notice. After I filled up the container, I run the pump. Moment water start going around, the level drop to almost half. Now I top up more water & some coolant again. Here's the question : Will water slip through when I turn off the pump for too long ??? Say, days or weeks ??  I can have it off for a day & its still fine. See, the prob is my container isnt 100% air tight or even hand tight. Notice how I join the host to the cover ?? Here's one thing that worry me most. I'll certainly need further modifications..., before that, advices ??

Thanks for visiting. And tips & suggestions greatly welcome ;)

VamP