Monster (Bully) Class - Stock and Modified
Monster Class Stock 2wd/4wd (Bully’s class vehicles)
1. Truck may not have any added weight.
2. Battery no more than 1.5vdc in orginal location.
3. Tires and wheels shall remain stock. May be painted except on contact area. May be re-treaded or cut to individuals pattern.
4. Hitch may be the stock loop or a screw-eye type and cannot be more than 2 1/2”
measured from a level surface.
5. No other alterations allowed.
Monster Class Modified 2wd/4wd ***
1. Truck may not weigh more than 10 ounces.
2. Battery no more than 12v total may be used in any combination.(#cells) If mounted
outside of vehicle body, shall be painted to simulate weights, bumpers, etc. Shall
emulate part of the vehicle. (look realistic) Must carry own power source.
3. Tires and wheels must be rubber base. May be re-treaded or patterned.
4. Wheelbase and width shall not be altered.
5. May use an external switching device.
6. May replace gears and/or motor. May remove second set of gears. Replacement motor has to readily available and fit within the chassis.
7. Hitch may be the stock loop or a screw-eye type and cannot be more than 2 1/2”
measured from a level surface.
8. Weights may be added to achieve the correct weight and balance, but should
present a realistic appearance if placed on the outside of the vehicle.
9. Lights may be disconnected or removed if desired.
10. Overall vehicle length shall not exceed 6 1/2” measured from the hitch to the front
bumper or weights if used.
11. Weights can be made from any material but must be securely attached to vehicle.
12. Weights, batteries, switches cannot exceed beyond wheel’s width.
*** examples of class... Bully’s 4x4, Bright Lite vehicles and other non r/c vehicles
February Winner
Top 4 Winners - March
